Samsung LN-R269D TFT-LCD Television User Manual

							\fnglish\b5
G\fN\fRALINFORMATION
Remote Co\ft\bol
POWERTurns the TV on \bnd off. (See p\bge 19)
ANTENNAPress to sele\ft “AIR” or “CABLE”. (See p\bges 8~11)
GUIDEPress to displ\by the on-s\freen Ele\ftroni\f Progr\bm Guide (EPG).
(See p\bge 104)
-Press to sele\ft \bddition\bl \fh\bnnels (digit\bl \bnd \bn\blog) being 
bro\bd\f\bst by the s\bme st\btion. For ex\bmple, to sele\ft \fh\bnnel 
“54-3”, press “54”, then press “-” \bnd “3”. 
MUTEPress to tempor\brily \fut off the sound. (See p\bge 19)
MENUDispl\bys the m\bin on-s\freen menu. (See p\bge 20)
MODESele\fts \b t\brget devi\fe to be \fontrolled by the S\bmsung  
remote \fontrol (TV, VCR, CATV, DVD, STB).
(See p\bges 29~31)
NUMERIC BUTTONSPress to \fh\bnge the \fh\bnnel.
PRE-CHTurns to the previous \fh\bnnel. (See p\bge 19)
CH a\fd CH (Cha\f\fel UP/Dow\f) Press to \fh\bnge \fh\bnnels. (See p\bge 19)
VOL + a\fd VOL - Press to in\fre\bse or de\fre\bse the volume. (See p\bge 19)
SOURCEPress to displ\by \bll of the \bv\bil\bble video sour\fes.
UP / DOWN / LEFT / RIGHT / ENTERUse to sele\ft on-s\freen menu items \bnd \fh\bnge menu v\blues.
FAV.CHPress to swit\fh to your f\bvorite \fh\bnnels. (See p\bge 62) 
MTSPress to \fhoose stereo, mono or Sep\br\bte Audio Progr\bm 
(SAP bro\bd\f\bst). (See p\bges 55~56)
PIPPi\fture-in Pi\fture ON/OFF. (See p\bge 44)
CH.LISTDispl\bys the \fh\bnnel list. (See p\bge 64)
You can use the remote control up to a distance of about 23 feet from the TV.  When using the
remote, always point it directly at the TV. You can also use your remote control to operate
your VCR, Cable box, DVD player, or Set\bTop Box.
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 5 
						

							\fnglish\b6
G\fN\fRALINFORMATION
A\fy\fetPress the Anynet button to bring up the Anynet menu. Refer to “Anynet AV Owner’s Instru\ftions”.
STILLPress to stop the \b\ftion during \b p\brti\ful\br s\fene. 
Press \bg\bin to resume norm\bl video. (See p\bge 43)
P.SIZEPress to \fh\bnge the s\freen size. (See p\bge 41~42)
DNIeOff : DNIe Demo mode is de\b\ftiv\bted.
On : The right-h\bnd side of the s\freen shows the improved DNIeim\bge. 
The left-h\bnd side of the s\freen shows the origin\bl im\bge.(See p\bge 40)
SRSSele\fts TruSurround XT mode. (See p\bge 54)
SETAdjusts 5 sep\br\bte devi\fes - TV, VCR, C\bble, DVD, or 
Set-Top Box. (See p\bges 29~31)
INFOUse to see inform\btion on the \furrent bro\bd\f\bst. (See p\bge 20)
EXITPress to exit the menu.
SLEEPPress to sele\ft \b preset time interv\bl for \butom\bti\f shut off.
CHDispl\bys the \bv\bil\bble \fh\bnnels in sequen\fe. (These buttons 
\fh\bnge \fh\bnnels in the PIP window only.) (See p\bge 46)
CAPTIONControls the \f\bption de\foder. (See p\bges 87~91)
VCR/DVD Fu\fctio\fs (A\fy\fet mode o\fly)- Rewind
- Stop
- Pl\by/P\buse
- F\bst/Forw\brd
RESETWhen your remote does not work, \fh\bnge the b\btteries \bnd 
press the RESET button for 2-3 se\fonds before use.
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 6 
						

							\fnglish\b7
3
Repl\b\fe the \fover.
Remove the batteries and store them
in a cool, dry place if you won’t be
using the remote control for a long
time.
The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage,
the batteries last for about one year.)
2
Inst\bll two AAA size
b\btteries.
Make sure to match the “+” and
“
–” ends of the batteries with the
diagram inside the compartment.
I\fstalli\fg Batte\bies i\f the Remote Co\ft\bol
1
Slide the Cover out
\fompletely.
G\fN\fRALINFORMATION
If the \bemote co\ft\bol does\f’t wo\bk
Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 7 
						

							\fnglish\b8
Co\f\fecti\fg VHF a\fd UHF A\fte\f\fas
If your antenna has a set of leads that
look like this, see “Antennas with
300\bohm Flat Twin Leads” below.
If your antenna has one lead that looks
like this, see “Antennas with 75\bohm
Round Leads” on page 9.
If you have two antennas, see “Separate
VHF and UHF Antennas” on page 9.
A\fte\f\fas with 300-ohm Flat Twi\f Leads
If you are using an off\bair antenna (such as a roof antenna or “rabbit ears”) that has
300\bohm twin flat leads, follow the directions below.
Chapte\b 2
CONN\fCTIONS
1Pl\b\fe the wires from
the twin le\bds under
the s\frews on \b 
300-75 ohm \bd\bpter
(not supplied). Use \b
s\frewdriver to tighten
the s\frews.
2
Plug the \bd\bptor into
the ANT 1 IN
(CABLE) termin\bl on
the b\b\fk of the TV.
ANT 1 IN(CABLE)
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 8 
						

							\fnglish\b9
Co\f\fecti\fg Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
Plug the in\foming
\f\bble into the
ANT 1 IN (CABLE)
termin\bl on the
b\b\fk of the TV.
Because this TV is cable\bready,
you do not need a cable box to
view unscrambled cable channels.
2
Plug the \fombiner
into the ANT 2 IN
(AIR) termin\bl on
the bottom of the
re\br p\bnel.
A\fte\f\fas with 75-ohm Rou\fd Leads
1
Plug the \bntenn\b
le\bd into the ANT 2 IN
(AIR) termin\bl on the
b\b\fk of the TV.
Sepa\bate VHF a\fd UHF A\fte\f\fas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner\badaptor (available at most electronics shops).
1
Conne\ft both \bntenn\b
le\bds to the \fombiner.
CONN\fCTIONS
ANT 2 IN(AIR)
UHF
VHF
ANT 2 IN
(AIR)
UHF
VHF
ANT 1 IN
(CABLE)
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 9 
						

							\fnglish\b10
CONN\fCTIONS
Co\f\fecti\fg to a Cable Box that Desc\bambles All Cha\f\fels
1
Find the \f\bble th\bt is
\fonne\fted to the
ANT OUT termin\bl 
on your \f\bble box.
This terminal might be labeled
“ANT OUT”, “VHF OUT” or
simply, “OUT”.
2
Conne\ft the other end
of this \f\bble to the
ANT 1 IN (CABLE) 
termin\bl on the b\b\fk
of the TV. 
Co\f\fecti\fg to a Cable Box that Desc\bambles Some Cha\f\fels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two\bway splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)
1
Find \bnd dis\fonne\ft
the \f\bble th\bt is
\fonne\fted to the
ANT IN termin\bl
on your \f\bble box.
This terminal might be labeled
“ANT IN”, “VHF IN” or simply, “IN”.
2
Conne\ft this \f\bble
to \b two-w\by splitter.
3
Conne\ft \bn RF
\f\bble between \bn
OUTPUT termin\bl on
the splitter \bnd the IN
termin\bl on the \f\bble
box.
ANT INANT OUT
ANT 1 IN(CABLE)
ANT IN
In\foming \f\bble Splitter
In\foming \f\bble
Splitter
C\bble Box
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 10 
						

							\fnglish\b11
CONN\fCTIONS
4
Conne\ft \bn RF
\f\bble between the
ANT OUT termin\bl
on the \f\bble box
\bnd the B–IN 
termin\bl on the
RF(A/B) swit\fh.
5
Conne\ft \bnother
\f\bble between the
other OUT termin\bl
on the splitter \bnd
the A–IN termin\bl on
the RF (A/B) swit\fh.
6
Conne\ft the l\bst
RF \f\bble between the
OUT termin\bl on the
RF (A/B) swit\fh \bnd
the ANT 1 IN (CABLE)
termin\bl on the re\br
of the TV.
After you have made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
In\foming\f\bble
Splitter
C\bble Box
In\foming \f\bble
In\foming \f\bble Splitter
Splitter C\bble Box
C\bble Box RF (A/B)
Swit\fh
RF (A/B) Swit\fh
RF (A/B) Swit\fh TV Re\br
ANT 1IN
(CABLE)
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 11 
						

							\fnglish\b12
CONN\fCTIONS
3
Conne\ft \bn RF \f\bble
between the
ANT OUT termin\bl
on the VCR \bnd the
ANT 1 IN (CABLE) 
or ANT 2 IN (AIR)
termin\bl on the TV.
Co\f\fecti\fg a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 8\b11).
Skip step 1 if you have not yet connected to an antenna or a cable system. 
1Unplug the \f\bble or
\bntenn\b from the
b\b\fk of the TV.
2Conne\ft the \f\bble or
\bntenn\b to the
ANT IN termin\bl
on the b\b\fk of the
VCR.VCR Re\br P\bnel
In\foming C\bble  or Antenn\b
TV Re\br P\bnel
RF C\bble (Option)
VCR Re\br P\bnel ANT IN
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 12 
						

							\fnglish\b13
CONN\fCTIONS
4Conne\ft \bn \budio 
\f\bble between the
AUDIO OUT j\b\fks on 
the VCR \bnd the 
AV   I N  [
R-AUDIO-L ]
j\b\fks on the TV.
5Conne\ft \b video
\f\bble between the
VIDEO OUT j\b\fk on
the VCR \bnd the
AV   I N   [
VIDEO ]
j\b\fk
on the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
* \fach external input source device has a different back panel configuration.
If you have a “mono” (non\bstereo) VCR, use the Y\bconnector (not supplied) to hook
up to the right and left audio input jacks of the TV. If your VCR is stereo, you must
connect two cables.
TV Re\br P\bnel
RF C\bble (Option)
Audio C\bble (Option)
VCR Re\br P\bnel
TV Re\br P\bnel
RF C\bble  (Option)
Audio C\bble (Option)
VCR Re\br P\bnel
Video C\bble (Option)
*  When connecting an external device, match the color of the connection terminal to the cable.
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 13 
						

							\fnglish\b14
3Conne\ft \bn S-video
\f\bble between the 
S-VIDEO OUT j\b\fk on
the VCR \bnd the 
AV   I N  [
S-VIDEO ]
j\b\fk
on the TV.
An S\bVideo cable is usually included with an S\bVHS VCR.
(If not, check your local electronics store.)
*  \fach external input source device has a different back panel configuration.
1To begin, follow
steps 1–3 in the 
previous se\ftion to
\fonne\ft the \bntenn\b
or \f\bble to your
VCR \bnd your TV.
Co\f\fecti\fg a\f S-VHS VCR
Your Samsung TV can be connected to an S\bVideo signal from an S\bVHS VCR. 
(This connection delivers a better picture as compared to a standard VHS VCR.)
2Conne\ft \bn \budio
\f\bble between the
AUDIO OUT j\b\fks on
the  VCR \bnd the 
AV   I N   [
R-AUDIO-L ]
j\b\fks on the TV.
CONN\fCTIONS
S-Video C\bble (Option) Audio C\bble (Option) TV Re\br P\bnel
RF C\bble  (Option)
VCR Re\br P\bnel
Audio C\bble (Option)TV Re\br P\bnel
RF C\bble  (Option)
VCR Re\br P\bnel TV Re\br P\bnel
RF C\bble  (Option)
VCR Re\br P\bnel
*  When connecting an external device, match the color of the connection terminal to the cable.
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 14