Samsung LN-R269D TFT-LCD Television User Manual

							Englis\b-115
APPE\fDIX
Problem
T\be image is too lig\bt or too
dark.
Horizontal bars appear to 
flicker, jitter or s\bimmer on
t\be image.
Vertical bars appear to flicker,
jitter or s\bimmer on t\be image.
Screen is black and power
indicator lig\bt blinks steadily.
Image is not stable and may
appear to vibrate
w\ben you \bave a computer
connected to t\be PC input.
Image is not centered on t\be
screen.
If a still image is displayed for 
an extended period of time,
residual images or blurring
may appear. 
Possible Solutio\f
Adjust t\be Brig\btness and Contrast.
Adjust t\be Fine tuning.
Adjust t\be Coarse tuning and t\ben adjust t\be Fine
tuning.
Adjust t\be Coarse tuning and t\ben adjust t\be Fine
tuning.
On your computer c\beck: Power, Signal Cable.
T\be TV is using its power management system. 
Move t\be computer's mouse or press any key on t\be
keyboard. 
If t\be setting is not correct, use your computer utility
program to c\bange t\be display settings.
\fOTE: Your TV supports multiscan display functionswit\bin t\be following frequency domain:
Adjust t\be \borizontal and vertical position.
T\be screen position must be adjusted on t\be output
source (i.e. STB) wit\b a digital signal.
W\ben you need to leave t\be monitor
unused for an extended period of time, adjust
t\be settings so t\bat t\be monitor automatically
goes into energy saving mode or activates t\be
screen saver to display moving images.
Horizo\ftal freque\fcy (kHz)  Vertical freque\fcy  (Hz)
PC Maximum refresh rate (at 60Hz)
T\be TFT LCD panel uses a panel consisting of sub pixels (3,147,264) w\bic\b require
sop\bisticated tec\bnology to produce. However, t\bere may be few brig\bt or dark pixels
on t\be screen. T\bese pixels will \bave no impact on t\be performance of t\be product.
30~60
60~75
1360 x 768
02 BN68-00910A-03Eng.qxd  10/20/05 3:39 PM  Page 115 
						

							Englis\b-116
APPE\fDIX
I\bstalli\bg the Sta\bd (LN-R269D, LN-R329D)
Disco\b\becti\bg the Sta\bd
1.Place \bhe TV faced d\fwn \fn a s\ff\b cl\f\bh \fr cushi\fn \fn a \bable.
2.A\b\bach \bhe s\band \b\f \bhe TV se\b as sh\fwn in \bhe pic\bure.
3.Use \bhe f\fur screws \b\f \bigh\bly fix \bhe s\band.
1.Place \bhe TV faced d\fwn \fn a s\ff\b cl\f\bh \fr cushi\fn \fn a \bable.
2.Rem\fve f\fur screws fr\fm \bhe back \ff \bhe TV.
3. Separa\be \bhe s\band fr\fm \bhe TV.
4.C\fver \bhe b\f\b\b\fm h\fle wi\bh a cap.

  
02 BN68-00910A-03Eng.qxd  10/20/05 3:39 PM  Page 116 
						

							Englis\b-117
APPE\fDIX
I\bstalli\bg the Wall Mou\bt Kit (LN-R269D)
Note: T\bis inst\fll\ftion is to be used w\ben \ftt\fc\bing t\be w\fll mount to \f w\fll.W\ben \ftt\fc\bing to ot\ber building m\fteri\fls, ple\fse cont\fct your ne\frest de\fler.
Co\fpo\be\bts (Sold separately)
How to asse\fble the Wall Mou\bt Bracket
1   Mark \bhe l\fca\bi\fn \fn \bhe wall where \bhe h\fle will be drilled.
Make \fver 35mm-dep\bh-h\fle \fn \bhe marked l\fca\bi\fn using drill.Fix anch\frs \fn each h\fle \fn \bhe wall.
C\fnnec\b wall-bracke\b \b\f \bhe wall wi\bh w\f\fd screws af\ber fi\b\bing
anch\frs in\b\f \bhe wall-bracke\b .
Note: If t\be br\fcket is not firmly fixed to t\be w\fll, LCD TV c\fn f\fll off.
2  Turn \bhe p\fwer \fff and unplug \bhe p\fwer c\frd fr\fm \bhe \fu\ble\b.
Place \bhe TV faced d\fwn \fn a s\ff\b cl\f\bh \fr cushi\fn \fn a \bable.
A\b\bach \bhe se\b-bracke\b \fn\b\f \bhe rear side \ff \bhe TV se\b and secure \bhe screws .
3  Inser\b \bhree Hangers \ff \bhe se\b-bracke\b in\b\f \bhe gr\f\fves \ff \bhe wall-bracke\b . Fix se\b-bracke\b and wall-bracke\b wi\bh screws .
Note: Be\bore in\ftalling the \fet on the wall, connect the cable\f to the \fet \bir\ft.
M4 X L20
Wall-Bracke\b Se\b-Bracke\b  Screw: 8EAW\f\fd Screw: 4EAAnch\fr: 4EAIns\balla\bi\fn Guide
M4 X L12
02 BN68-00910A-03Eng.qxd  10/20/05 3:39 PM  Page 117 
						

							Englis\b-118
APPE\fDIX
I\bstalli\bg the Wall Mou\bt Kit (LN-R329D, LN-R409D)
Note: T\bis inst\fll\ftion is to be used w\ben \ftt\fc\bing t\be w\fll mount to \f w\fll.W\ben \ftt\fc\bing to ot\ber building m\fteri\fls, ple\fse cont\fct your ne\frest de\fler.
Co\fpo\be\bts (Sold separately)
How to asse\fble the Wall Mou\bt Bracket
1   Mark \bhe l\fca\bi\fn \fn \bhe wall where \bhe h\fle will be drilled.
Make \fver 35mm-dep\bh-h\fle \fn \bhe marked l\fca\bi\fn using drill.Fix anch\frs \fn each h\fle \fn \bhe wall.
C\fnnec\b wall-bracke\b \b\f \bhe wall wi\bh w\f\fd screws af\ber fi\b\bing
anch\frs in\b\f \bhe wall-bracke\b .
Note: If t\be br\fcket is not firmly fixed to t\be w\fll, LCD TV c\fn f\fll off.
2  Turn \bhe p\fwer \fff and unplug \bhe p\fwer c\frd fr\fm \bhe \fu\ble\b.
Place \bhe TV faced d\fwn \fn a s\ff\b cl\f\bh \fr cushi\fn \fn a \bable.
L\f\fsen \bw\f screws \fn \bhe rear side \ff \bhe TV se\b (\fnly m\fdel LN-R409D applied).
A\b\bach \bhe se\b-bracke\b \fn\b\f \bhe rear side \ff \bhe TV se\b and secure \bhe screws .
F\fr 40 inches m\fdel, a\b\bach \bhe bracke\b in\b\f \bhe \bw\f h\fles wi\bh \bhe \bw\f screws rem\fved 
in s\bep 3 ab\fve.
3  Inser\b \bhree Hangers \ff \bhe se\b-bracke\b in\b\f \bhe gr\f\fves \ff \bhe wall-bracke\b .
Fix se\b-bracke\b and wall-bracke\b wi\bh screws .
Note: Be\bore in\ftalling the \fet on the wall, connect the cable\f to the \fet \bir\ft.
M4 X L15 M4 X L20
Wall-Bracke\b Se\b-Bracke\b 
Screw: 8EAW\f\fd Screw: 7EAAnch\fr: 7EA Screw: 3EAIns\balla\bi\fn Guide
M4 X L8
(Only M\fdel LN-R409DApplied)
02 BN68-00910A-03Eng.qxd  10/20/05 3:39 PM  Page 118 
						

							Englis\b-119
APPE\fDIX
Wall I\bstallatio\b I\bstructio\bs (LN-R469D)
Refer \b\f \bhe c\frrec\b ins\balla\bi\fn guide acc\frding \b\f y\fur wall bracke\b.C\fn\bac\b a \bechnician f\fr ins\balling \bhe wall bracke\b.
1
I\bstallatio\b Notes
Samsung Elec\br\fnics is n\f\b resp\fnsible f\fr any damage \b\f \bhe pr\fduc\b \fr injury \b\f 
y\furself \fr \f\bhers if y\fu elec\b \b\f perf\frm \bhe wall ins\balla\bi\fn.2
This pr\fduc\b is f\fr ins\balling \fn cemen\b walls. The pr\fduc\b may n\f\b s\bay in place when
ins\balled \fn plas\ber \fr w\f\fd.3
Only use \bhe c\fmp\fnen\bs and access\fries shipped wi\bh \bhe panel.
Parts (Wall attach\fe\bt pa\bel is sold separately. Check with your dealer.)
Wall Bracket Hi\bge Accessories
1 Lef\b : 1 Righ\b : 1
Plas\bic Hanger : 4 Screw : 11
M4 X L20  
Screw : 4  Anch\fr : 11
M8 X L40    
02 BN68-00910A-03Eng.qxd  10/20/05 3:39 PM  Page 119 
						

							Englis\b-120
APPE\fDIX
How to asse\fble the Wall Mou\bt Bracket
Inser\b and \bigh\ben \bhe Cap\bive Screw in \bhe direc\bi\fn \ff \bhe arr\fw.
When d\fne, m\fun\b \bhe wall bracke\b \fn \bhe wall.1
Bef\fre drilling in\b\f \bhe wall, check if \bhe
leng\bh be\bween \bhe \bw\f l\fcking h\fles a\b
\bhe back \ff \bhe pr\fduc\b is c\frrec\b. If \bhe
leng\bh is \b\f\f sh\fr\b \fr l\fng, l\f\fsen all \fr
s\fme \ff \bhe 4 screws \fn \bhe wall
bracke\b \b\f adjus\b \bhe leng\bh.2Check \bhe ins\balla\bi\fn diagram and
mark \bhe drill p\fin\bs \fn \bhe wall.
Use \bhe 5.0 mm bi\b \b\f drill h\fles deeper
\bhan 35 mm. Fix each anch\fr in \bhe
c\frresp\fnding h\fle. Ma\bch each \ff \bhe
bracke\bs and hinge h\fles \b\f \bhe
c\frresp\fnding anch\fr h\fles and inser\b
and \bigh\ben \bhe 11 screws .3
Leng\bh be\bween \bhe
\bw\f l\fcking h\flesHinge (Righ\b)
There are \bw\f hinges
(lef\b and righ\b). Use \bhe
c\frrec\b \fne.
Hinge (Lef\b)
Wall Bracke\b
Cap\bive Screw
02 BN68-00910A-03Eng.qxd  10/20/05 3:39 PM  Page 120 
						

							Englis\b-121
APPE\fDIX
Fixi\bg the TV pa\bel to the wall attach\fe\bt pa\bel bracket
The shape \ff \bhe pr\fduc\b may vary depending \fn \bhe m\fdel. (The assemblies \ff \bhe plas\bic
hanger and \bhe screw are \bhe same)Rem\fve \bhe 4 screws \fn \bhe back \ff \bhe pr\fduc\b.
1
Inser\b \bhe screw in\b\f \bhe plas\bic hanger. (See \bhe figure bel\fw)2
• M\fun\b \bhe pr\fduc\b \fn \bhe wall bracke\b and make sure i\b is pr\fperly fixed \b\f \bhe lef\b andrigh\b plas\bic hangers.
• Be careful when ins\balling \bhe pr\fduc\b \fn \bhe bracke\b as fingers can be caugh\b in \bhe h\fles.
• Make sure \bhe wall bracke\b is securely fixed \b\f \bhe wall, \fr \bhe pr\fduc\b may n\f\b s\bay in place af\ber ins\balla\bi\fn.
Tigh\ben \bhe 4 screws in s\bep 2 (plas\bic
hanger + screw ) \b\f \bhe rear h\fles \ff
\bhe pr\fduc\b.
3Rem\fve safe\by pin ( ) and inser\b \bhe 4
pr\fduc\b h\flders in\b\f \bhe c\frresp\fnding
bracke\b h\fles ( ). Then place \bhe
pr\fduc\b ( ) s\f \bha\b i\b is firmly fixed \b\f
\bhe bracke\b. Make sure \b\f reinser\b and
\bigh\ben \bhe safe\by pin ( ) \b\f securely
h\fld \bhe pr\fduc\b \b\f \bhe bracke\b.4
LCD TV
Wall Bracke\b Wall
02 BN68-00910A-03Eng.qxd  10/20/05 3:39 PM  Page 121 
						

							Englis\b-122
APPE\fDIX
How to Adjust Mou\bti\bg A\bgle
N\f\be N\f\be : Adjus\b \bhe bracke\b angle \b\f -2° bef\fre ins\balling i\b \fn \bhe wall.
1. Fix \bhe pr\fduc\b \b\f \bhe wall bracke\b.
2. H\fld \bhe pr\fduc\b a\b \bhe \b\fp in \bhe cen\ber and pull i\b f\frward (direc\bi\fn \ff \bhe arr\fw) \b\f adjus\b \bhe angle.
(See \bhe figure \b\f \bhe righ\b)
3. Y\fu can adjus\b \bhe bracke\b angle be\bween -2° and 15°. 
Make sure \b\f use \bhe \b\fp cen\ber,
and n\f\b \bhe lef\b \fr \bhe righ\b side \ff
\bhe pr\fduc\b \b\f adjus\b \bhe angle.
02 BN68-00910A-03Eng.qxd  10/20/05 3:39 PM  Page 122 
						

							Englis\b-123
APPE\fDIX
How to asse\fble the Sta\bd-Base (LN-R469D)
Using \bhe 4 screws f\fr securing \bhe s\band pegs and \bhe m\fni\b\fr, firmly a\b\bach \bhe m\fni\b\fr
\b\f \bhe s\band pegs. (The ex\beri\fr \ff \bhe se\b may be differen\b \bhan \bhe pic\bure.)1
Note
• Tw\f \fr m\fre pe\fple sh\fuld carry \bhe TV. Never lay \bhe TV \fn \bhe fl\f\fr because \ff p\fssible   
damage \b\f \bhe screen.
• Always s\b\fre \bhe TV uprigh\b.
War\bi\bg
Firmly secure \bhe s\band \b\f
\bhe TV bef\fre m\fving i\b,
as \bhe s\band may fall and
c\fuld cause seri\fus injury.
02 BN68-00910A-03Eng.qxd  10/20/05 3:39 PM  Page 123 
						

							Englis\b-124
Usi\bg Your TV i\b A\bother Cou\btry
If you plan to take your TV wit\b you to a foreign country, please be aware of t\be
different television systems t\bat are in use around t\be world. A TV designed for one
system may not work properly wit\b anot\ber system due to differences in t\be TV c\bannel
frequencies.
Usi\bg the A\bti-Theft Ke\bsi\bgto\b Lock
The Kensing\b\fn l\fck is a device used \b\f physically fix \bhe sys\bem when using i\b in a public place.
The l\fcking device has \b\f be purchased separa\bely. The appearance and l\fcking me\bh\fd may
differ fr\fm \bhe illus\bra\bi\fn depending \fn \bhe manufac\burer. Please refer \b\f \bhe manual pr\fvided
wi\bh \bhe Kensing\b\fn l\fck f\fr pr\fper use.
1.  Inser\b  \bhe  l\fcking  device  in\b\f  \bhe  Kensing\b\fn  sl\f\b  \fn  \bhe  LCD  TV  (Figure  1),  and  \burn  i\b  in
\bhe l\fcking direc\bi\fn (Figure 2).
2.  C\fnnec\b \bhe Kensing\b\fn l\fck cable.
3.  Fix \bhe Kensing\b\fn l\fck \b\f a desk \fr a heavy s\ba\bi\fnary \fbjec\b.
Figure 2
Figure 1
Cable

APPE\fDIX
02 BN68-00910A-03Eng.qxd  10/20/05 3:39 PM  Page 124