Samsung LN-R269D TFT-LCD Television User Manual

\fnglish\b15
CONN\fCTIONS
Note: For an explanation of Component video, see your DVD player owner's manual.  Be sure to match the component video and audio connections. For example, if connecting 
the video cable to COMPON\fNT IN 1, connect the audio cable to COMPON\fNT IN 1 also.
*  \fach external input source device has a different back panel configuration.
Co\f\fecti\fg a DVD Playe\b
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1Conne\ft \bn \budio
\f\bble...

\fnglish\b16
Co\f\fecti\fg a DVD Playe\b/Set-Top Box via DVI
This can be applied only if there is a DVI Output connector on the external device.
*  \fach external input source device has a different back panel configuration.
1
Conne\ft \b DVI to HDMI
\f\bble or DVI-HDMI
Ad\bpter between the
HDMI/DVI \fonne\ftor on
the TV \bnd the DVI
\fonne\ftor on the DVD
pl\byer/Set-Top Box.
2
Conne\ft \bn \budio
\f\bble between the 
DVI IN [
R-AUDIO-L ]
j\b\fk on the TV \bnd the
AUDIO OUT
j\b\fks on the DVD...

\fnglish\b17
CONN\fCTIONS
Co\f\fecti\fg a PC
TV Re\br P\bnel
D-Sub \f\bble (Option) PC1
Conne\ft \b D-Sub
\f\bble between PC IN
[PC] \fonne\ftor on the
TV \bnd the PC output 
\fonne\ftor on your 
\fomputer. 
PC Audio C\bble (Option)
TV Re\br P\bnel
D-Sub \f\bble (Option) PC
2
Conne\ft \b PC \budio
\f\bble between PC IN
[AUDIO] j\b\fk on the
TV \bnd the Audio Out
j\b\fk of the sound \f\brd
on your \fomputer.
Co\f\fecti\fg a\f Amplifie\b/DVD Home Theate\b
1Conne\ft \bn \budio
\f\bble between the
AUDIO OUT...

Englis\b-18
CO\f\fECTIO\fS
Connect\bng Cab\feCARD (LN-R409D, LN-R469D)
You mu\bt obta\fn a CableCARD from a local cable \berv\fce prov\fder.
TV Rear Panel
1
In\bert the CableCARD \fnto the “CableCARD” \blot and the me\b\bage “CableCARD In\berted” \f\b
d\f\bplayed on the \bcreen. If the channel \fnformat\fon doe\b not ex\f\bt, the me\b\bage “Updat\fng
Channel L\f\bt” \f\b d\f\bplayed dur\fng channel \fnformat\fon conf\fgurat\fon.
It could take \beveral m\fnute\b to update the channel \fnformat\fon...

Englis\b-19
Chapte\b 3
OPE\fATION
Chang\fng Channels
Us\fng the Channel Buttons
1
Press \bhe CH /b\f\b\bons \bo change channels. 
W\ben you press t\be CH/buttons, t\be TV c\banges c\bannels in sequence.
You will see all t\be c\bannels t\bat t\be TV \bas memorized. (T\be TV must \bave 
memorized at least t\bree c\bannels). You will not see c\bannels t\bat were eit\ber 
erased or not memorized. See pages 21-28 to memorize c\bannels.
Us\fng the PRE-CH Button to select the P\bev\fous Channel
1
Press \bhe...

Englis\b-20
V\few\fng the D\fsplay
T\be display identifies t\be current c\bannel and t\be status
of certain audio-video settings.  
V\few\fng the Menus
T\be screen displays
disappear after about ten seconds.
Press t\be INFO button once more
or wait approximately 10 seconds
and it disappears automatically.1
Press \bhe INFOb\f\b\bon on \bhe
remo\be con\brol.
The TV will display \bhe
channel, \bhe \bype of so\fnd,
and \bhe s\ba\b\fs of cer\bain
pic\b\fre and so\fnd se\b\bings.
1
Wi\bh \bhe power on, press...

\fnglish\b21
OP\fRATION
Plug & Play Featu\be
When the TV is initially powered on, two basic customer settings proceed
automatically and subsequently:
1
Press the POWERbutton
on the remote \fontrol.
The mess\bge 
“Menu l\bngu\bge, Ch\bnnels 
\bnd 
Time will be set.” 
is displ\byed
. Press the 
ENTERbutton, then 
“Sele\ft the l\bngu\bge of the
OSD” menu is \butom\bti\f\blly 
displ\byed.
2
Press the ENTERbutton
to enter the l\bngu\bge.
Press the 
UP/DOWNbuttons  to sele\ft l\bngu\bge,
then the ENTERbutton....

\fnglish\b22
OP\fRATION
4-1
Press the UP/DOWNbuttons to sele\ft “C\bble” or
“Air+C\bble” then press the
ENTERbutton.
Press the 
UP/DOWN
buttons to sele\ft “STD”, 
“HRC” or “IRC”, press the 
ENTERbutton.
STD, HRC and IRC  identify various types of 
cable  TV systems. 
Contact your local cable 
company to identify the 
type of cable system that 
exists in your particular 
area. 
At this point the signal  source has been selected. 
Proceed to “Storing 
Channels in Memory”.(LN-R269D / LN-R329D)
4-2
Press the...

\fnglish\b23
OP\fRATION
5
The TV will begin 
memorizing \bll of the 
\bv\bil\bble \fh\bnnels. 
After \bll the \bv\bil\bble 
\fh\bnnels \bre stored, the 
Auto progr\bm menu 
re\bppe\brs. Press the 
ENTERbutton when 
\fh\bnnel memoriz\btion is 
\fomplete. “Set to d\bylight 
s\bvings time.” menu is 
\butom\bti\f\blly displ\byed.
6
Press the ENTERbutton.
Press the UP/DOWNbuttons to sele\ft “Yes” or
“No”, then the ENTERbutton. “Sele\ft your time
zone in whi\fh you live”
menu is \butom\bti\f\blly 
displ\byed....

\fnglish\b24
OP\fRATION
If you wa\ft to \beset this featu\be...
1
Press the MENUbutton.
Press the 
UP/DOWNbuttons to sele\ft “Setup”,
then press the ENTERbutton. 
2
Press the UP/DOWNbuttons to sele\ft 
“Plug & Pl\by”. 
Press the 
ENTERbutton.
For further det\bils on setting 
up options, refer to the 
previous p\bge. 
Note
•  Plug and Play can only be accessed in the TV mode.
7
Press the UP/DOWNbuttons to highlight the time
zone for your lo\f\bl \bre\b
(\bnd to move the  highlight
to the \bppropri\bte...