Samsung LN-R269D TFT-LCD Television User Manual

\fnglish\b5
G\fN\fRALINFORMATION
Remote Co\ft\bol
POWERTurns the TV on \bnd off. (See p\bge 19)
ANTENNAPress to sele\ft “AIR” or “CABLE”. (See p\bges 8~11)
GUIDEPress to displ\by the on-s\freen Ele\ftroni\f Progr\bm Guide (EPG).
(See p\bge 104)
-Press to sele\ft \bddition\bl \fh\bnnels (digit\bl \bnd \bn\blog) being 
bro\bd\f\bst by the s\bme st\btion. For ex\bmple, to sele\ft \fh\bnnel 
“54-3”, press “54”, then press “-” \bnd “3”. 
MUTEPress to tempor\brily \fut off the sound. (See p\bge 19)...

\fnglish\b6
G\fN\fRALINFORMATION
A\fy\fetPress the Anynet button to bring up the Anynet menu. Refer to “Anynet AV Owner’s Instru\ftions”.
STILLPress to stop the \b\ftion during \b p\brti\ful\br s\fene. 
Press \bg\bin to resume norm\bl video. (See p\bge 43)
P.SIZEPress to \fh\bnge the s\freen size. (See p\bge 41~42)
DNIeOff : DNIe Demo mode is de\b\ftiv\bted.
On : The right-h\bnd side of the s\freen shows the improved DNIeim\bge. 
The left-h\bnd side of the s\freen shows the origin\bl im\bge.(See p\bge...

\fnglish\b7
3
Repl\b\fe the \fover.
Remove the batteries and store them
in a cool, dry place if you won’t be
using the remote control for a long
time.
The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage,
the batteries last for about one year.)
2
Inst\bll two AAA size
b\btteries.
Make sure to match the “+” and
“
–” ends of the batteries with the
diagram inside the compartment.
I\fstalli\fg Batte\bies i\f the Remote Co\ft\bol
1
Slide the Cover out
\fompletely....

\fnglish\b8
Co\f\fecti\fg VHF a\fd UHF A\fte\f\fas
If your antenna has a set of leads that
look like this, see “Antennas with
300\bohm Flat Twin Leads” below.
If your antenna has one lead that looks
like this, see “Antennas with 75\bohm
Round Leads” on page 9.
If you have two antennas, see “Separate
VHF and UHF Antennas” on page 9.
A\fte\f\fas with 300-ohm Flat Twi\f Leads
If you are using an off\bair antenna (such as a roof antenna or “rabbit ears”) that has
300\bohm twin flat leads, follow the...

\fnglish\b9
Co\f\fecti\fg Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
Plug the in\foming
\f\bble into the
ANT 1 IN (CABLE)
termin\bl on the
b\b\fk of the TV.
Because this TV is cable\bready,
you do not need a cable box to
view unscrambled cable channels.
2
Plug the \fombiner
into the ANT 2 IN
(AIR) termin\bl on
the bottom of the
re\br p\bnel.
A\fte\f\fas with 75-ohm Rou\fd Leads
1
Plug the \bntenn\b
le\bd into the ANT 2 IN
(AIR) termin\bl on the...

\fnglish\b10
CONN\fCTIONS
Co\f\fecti\fg to a Cable Box that Desc\bambles All Cha\f\fels
1
Find the \f\bble th\bt is
\fonne\fted to the
ANT OUT termin\bl 
on your \f\bble box.
This terminal might be labeled
“ANT OUT”, “VHF OUT” or
simply, “OUT”.
2
Conne\ft the other end
of this \f\bble to the
ANT 1 IN (CABLE) 
termin\bl on the b\b\fk
of the TV. 
Co\f\fecti\fg to a Cable Box that Desc\bambles Some Cha\f\fels
If your cable box descrambles only some channels (such as premium channels), follow the...

\fnglish\b11
CONN\fCTIONS
4
Conne\ft \bn RF
\f\bble between the
ANT OUT termin\bl
on the \f\bble box
\bnd the B–IN 
termin\bl on the
RF(A/B) swit\fh.
5
Conne\ft \bnother
\f\bble between the
other OUT termin\bl
on the splitter \bnd
the A–IN termin\bl on
the RF (A/B) swit\fh.
6
Conne\ft the l\bst
RF \f\bble between the
OUT termin\bl on the
RF (A/B) swit\fh \bnd
the ANT 1 IN (CABLE)
termin\bl on the re\br
of the TV.
After you have made this connection, set the A/B switch to the “A” position for normal...

\fnglish\b12
CONN\fCTIONS
3
Conne\ft \bn RF \f\bble
between the
ANT OUT termin\bl
on the VCR \bnd the
ANT 1 IN (CABLE) 
or ANT 2 IN (AIR)
termin\bl on the TV.
Co\f\fecti\fg a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 8\b11).
Skip step 1 if you have not yet connected to an antenna or a cable system. 
1Unplug the \f\bble or
\bntenn\b from the
b\b\fk of the TV.
2Conne\ft the \f\bble or
\bntenn\b to the
ANT...

\fnglish\b13
CONN\fCTIONS
4Conne\ft \bn \budio 
\f\bble between the
AUDIO OUT j\b\fks on 
the VCR \bnd the 
AV   I N  [
R-AUDIO-L ]
j\b\fks on the TV.
5Conne\ft \b video
\f\bble between the
VIDEO OUT j\b\fk on
the VCR \bnd the
AV   I N   [
VIDEO ]
j\b\fk
on the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
* \fach external input source device has a different back panel configuration.
If you have a “mono” (non\bstereo) VCR, use the Y\bconnector (not supplied) to...

\fnglish\b14
3Conne\ft \bn S-video
\f\bble between the 
S-VIDEO OUT j\b\fk on
the VCR \bnd the 
AV   I N  [
S-VIDEO ]
j\b\fk
on the TV.
An S\bVideo cable is usually included with an S\bVHS VCR.
(If not, check your local electronics store.)
*  \fach external input source device has a different back panel configuration.
1To begin, follow
steps 1–3 in the 
previous se\ftion to
\fonne\ft the \bntenn\b
or \f\bble to your
VCR \bnd your TV.
Co\f\fecti\fg a\f S-VHS VCR
Your Samsung TV can be connected to an...