Samsung Le 32m61bs Owners Instructions

							
English-49

Coarse and Fine Tuning of the Image

The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone, then
adjust the frequency as best as possible (coarse) and Fine-tune again.\
After the noise has been reduced, re-adjust the picture so that it is
aligned on the center of screen.

Press the 
PC
button under the remote’s cover to select the PC mode.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Setup
.
Press the 
ENTER
button.
Result
: The options available in the 
Setup
group are displayed.

3
Press the or  button to select 
PC
.
Press the 
ENTER
button.
Result
: The options available in the
PC
menu are displayed.

4
Press the 
ENTER
button again.
Result
: The 
Image Lock
menu is selected.

5
Press the or  button to select 
Coarse
or 
Fine
.
Press the 
ENTER
button.
Result
: The horizontal bar is displayed.

6
Press the or button to adjust the screen quality. 
Press the 

ENTER
button.
V ertical stripes may appear or the picture may become blurry.

7
When you are satisfied with the settings, press the 
MENU
button
to return to the previous menu or press the 
EXIT
button to return to
normal viewing.

01 BN68-00956D-04Eng.qxd  11/29/05  4:15 PM  Page 49
 
						

							
English-50

Changing the Image Position

Press the 
PC
button under the remote’s cover to select the PC mode.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Setup
.
Press the 
ENTER
button.
Result
: The options available in the 
Setup
group are displayed.

3
Press the or  button to select 
PC
.
Press the 
ENTER
button.
Result
: The options available in the
PC
menu are displayed.

4
Press the or  button to select 
Position
.Press the 
ENTER
button.
Result
:Y ou can adjust the image 
Position
. 

5
Press the  or  button to adjust horizontal position.
Press the or  button to adjust vertical position.
Press the 

ENTER
button.

6
Press the 
MENU
button to return to the previous menu or press
the 
EXIT
button to return to normal viewing.

01 BN68-00956D-04Eng.qxd  11/29/05  4:15 PM  Page 50
 
						

							
English-51

Initializing the Image Settings

You can replace all image settings with the factory default values.

Press the 
PC
button under the remote’s cover to select the PC mode.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Setup
.
Press the 
ENTER
button.
Result
: The options available in the 
Setup
group are displayed.

3
Press the or  button to select 
PC
.
Press the 
ENTER
button.
Result
: The options available in the
PC
menu are displayed.

4
Press the or  button to select 
Image Reset
. 
Press the 
ENTER
button.
Result
:  You can initialize all image setting to the factory default values.

5
Press the 
MENU
button to return to the previous menu or press
the 
EXIT
button to return to normal viewing.

01 BN68-00956D-04Eng.qxd  11/29/05  4:15 PM  Page 51
 
						

							
English-52

Teletext Decoder

Most set channels carry “ teletext ”, pages of written information\
 that
provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:

Part Contents

A Selected page number.
B Broadcasting station identity.
C Current page number or search status.
D Date and time.
ET ext.
F Status information.

Displaying the Teletext Information

You can display teletext information at any time, but signal reception
must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To  activate the teletext mode and display the contents page:

1
Using the 
()
or 
()
button, select the channel providing
the teletext service.

2
Press the 
TTX/MIX
( /)
button to activate the teletext mode.
Result
: The contents page is displayed. It can be redisplayed at
any time by pressing the
MENU
()
button.

3
Press the 
TTX/MIX
( /)
button again.
Result
: The screen will split into two. This Double Teletext feature
lets you view the actual broadcast and teletext
information separately on the screen.

4
Press the 
TTX/MIX
( /)
button again.
Result
: The actual broadcast will be displayed simultaneously
with the teletext page on the screen.

5
To return to normal viewing, press the 
PIP
()
button.

6
Press the 
TV
()
button again to exit from the Text display. 
If any broken character appears while Text is being viewed,
make sure that the Text language is identical with the language
in the “Setup” menu mode. If both languages are different,
select the same language with the Text language on the
“Setup” menu.

01 BN68-00956D-04Eng.qxd  11/29/05  4:15 PM  Page 52
 
						

							
Press the number buttons on the remote control to enter the page
number directly:

1
Enter the three-digit page number listed in the contents by pressing the\
corresponding numeric buttons.
Result
:The current page counter is incremented and the page is
then displayed.

2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display on
a given page, press the 

PRE-CH
()
.
Press the 
PRE-CH 
()
button again to resume.

3
Using the various display options:

To  display... Press the...

Both teletext information and
TTX/MIX
(
/)
the normal broadcast
Hidden text
INFO
()
(answers to quiz games, for example)
The normal screen 

INFO
()
again
A
secondary page,
SLEEP
()
by entering its 4-digit number
The next page
Page Up
(
)
)

The previous page
Page Down
(
()

Double-size letters in the:
SIZE
()
•
Upper half of the screen •Once
• Lower half of the screen •Twice
Normal screen •Three times

English-53

Selecting a Specific Teletext Page

01 BN68-00956D-04Eng.qxd  11/29/05  4:15 PM  Page 53
 
						

							
English-54

Using Fastext to Select a Teletext Page

The various topics included in the teletext pages are colour-coded, and
can be selected by pressing the coloured buttons on the remote control.

1
Display the teletext contents page by pressing the 
TTX/MIX
(
/
) 
button.

2
Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line)\
.
Result:
The page is displayed with additional colour-coded
information that can be selected in the same way.

3To display the: Press the:

Previous page Red button.
Next page Green button.

4
When you have finished, press the 
PIP
() 
button to return to the
normal broadcast.

01 BN68-00956D-04Eng.qxd  11/29/05  4:15 PM  Page 54
 
						

							
English-55

Setting Up Your Remote Control

After it has been set up properly, your remote control can operate in five
different modes: TV, VCR, Cable, DVD, Set-Top Box. Pressing the
corresponding button on the remote control allows you to switch
between these modes, and control whichever piece of equipment you
choose.
Note
The remote control might not be compatible with all DVD Players,
VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR

1
Turn off your VCR.

2
Press the 
MODE
button and make sure that the VCR appears on the
LCD screen.

3
Press the 
SET
button on your TV’s remote control.

4
Using the number buttons on your remote control, enter three digits
of the VCR code listed on page 58 of this manual for your brand of
VCR. Make sure you enter three digits of the code, even  if the first
digit is a “0”. 
(If more than one code is listed, try the first one.)

5
Press the Power button on the remote control. 
Y our VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4,
but try one of the other codes listed for your brand of VCR.  
If no other codes are listed, try each VCR code, 000 through 072.

Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons 
still control your TV’s volume.

01 BN68-00956D-04Eng.qxd  11/29/05  4:15 PM  Page 55
 
						

							
English-56

Setting Up Your Remote Control

Setting Up the Remote to Operate Your Cable Box

1
Turn off your cable box.

2
Press the 
MODE
button and make sure that the CATV appears on
the LCD screen.

3
Press the 
SET
button on your TV’s remote control.

4
Using the number buttons on your remote control, enter three digits
of the cable box code listed on page 58 of this manual for  your
brand of cable box. Make sure you enter three digits of the code,
even if the first digit is a “0”.
If there is more than one code listed, try the first one.

5
Press the Power button on the remote control. 
Y our cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3, and
4, but try one of the other codes listed for your brand of cable box. If\
 no
other codes are listed, try each code, 000 through 045.

Note on Using Remote Control Modes: Cable Box
When your remote control is in “CATV” mode, the volume 
buttons still control your TV’s volume.

01 BN68-00956D-04Eng.qxd  11/29/05  4:15 PM  Page 56
 
						

							
English-57

Setting Up Your Remote Control

Setting Up the Remote to Operate Your DVD

1
Turn off your DVD.

2
Press the 
MODE
button and make sure that the DVD appears on the
LCD screen.

3
Press the 
SET
button on your TV’s remote control.

4
Using the number buttons on your remote control, enter three  digits
of the DVD code listed on page 58 of this manual for your brand of
DVD. Make sure you enter three digits of the code, even if the first
digit is a “0”.
If there is more than one code listed, try the first one.

5
Press the Power button on the remote control. 
Y our DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4,
but try one of the other codes listed for your brand of DVD.
If no other codes are list-ed, try each code, 000 through 009.

Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons
still control your TV’s volume.

01 BN68-00956D-04Eng.qxd  11/29/05  4:15 PM  Page 57
 
						

							
English-58

Setting Up Your Remote Control

Remote Control Codes

Brand

Aiwa
Curtis Mathes
Funai
GE
Hitachi
JC Penny
Kenwood
Magnavox
Marantz
NEC
Panasonic
Philco
Philips
Pioneer
RCA
Samsung
Sanyo
Sears
Sharp
Sony
Sylvania
Toshiba

Code

025
002  017  007  008 021  025  056  064  066
025
017 002 021  005  056
019  025  041  042
002  007  018  019  021  026 037  041  054  056
007  008  018  026  037
021  036  056  059
008  007  018  021  026  036  037   062
018  007  026  037  008  062  064
021  056  071  072
021  036  056  059
021  036
019  026  039  053
017  019  002  021  035  041  043  057  068
000
018  024
018  019  006  024  028  029  041  048  051
020  034  045  015
027  033  044
021  025  036  056  059
003  019  029  051  052

VCR Codes
Brand

Hitachi
Panasonic
Phlips
Pioneer
RCA
Samsung
zenith

Code

025  030
003  022  027  037  044
019  021  023  028
018  020  004  044
014  022  040
000
017  029  035  037  045

Cable Box Codes
Brand

Curtis Mathes
JVC
LG
ProScan, RCA
Panasonic
Samsung
Sony

Code

009
002
006
005
003 
000  001
007

DVD Codes

01 BN68-00956D-04Eng.qxd  11/29/05  4:15 PM  Page 58