Samsung Le 32m61bs Owners Instructions

							
English-9

Viewing the Remote Control(Teletext Functions)

Exit from the teletext display
P: T eletext next page
P:  T eletext previous page

Teletext Function : Refer to pages 52-54 for details

Teletext display/mix both
teletext information and the normal broadcast
T eletext sub page T
eletext cancel
Teletext hold
Teletext mode selection
(LIST/FLOF)
T eletext reveal
Teletext index
Teletext size selectionTeletext store

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 9
 
						

							
English-10

Installing Batteries in the Remote Control

1
Slide the cover out completely.

2
Install two AAA size batteries.
Makesure to match the “+” and “–” ends of the batteries with
the diagram inside the compartment.

3
Replace the cover.
Remove the batteries and store them in a cool, dry placeif you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work!
Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 10
 
						

							
English-11

Switching On and Off

The mains lead is attached to the rear of your set.

1
Plug the mains lead into an appropriate socket.
Result
:The standby indicator lights up on the front panel.
The main voltage is indicated on the rear of your set and the frequency is 50 or 60Hz.

2
Press the 
POWER
button on the front of the panel.
Result
:The programme that you were watching last is reselected
automatically.

3
Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or  button on the lower-right of
the panel.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 14).

4
To switch your set off, press the 
POWER
button again.

Placing Your Television in Standby Mode

Y our set can be placed in standby mode in order to reduce the power
consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).

1
Press the 
POWER
button on the remote control.
Result
:The screen is turned off and a red standby indicator
appears on the front of your set.

2
To  switch your set back on, simply press the 
POWER
, numeric
buttons (

0~9
) or channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time
(when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 11
 
						

							
English-12

Becoming Familiar with the Remote Control

The remote control is used mainly to:Change channels and adjust the volume.
Set up your set using the on-screen menu system.
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function

Used to display the -next stored channel.
Used to display the -previous stored channel.
to Used to display the corresponding channels.
For double digit channels, the second digit must be pushed immediately after the first. 
Failure to do this will result in a single digit 
channel being displayed.
Used to increase the-volume.
Used to decrease the-volume.

MUTE
Used to switch the sound off temporarily. 
To turn the sound back on, press this button
again, or press the  / button.

MENU
Used to display the Used to return to the   
on-screen menu system. previous menu or 
normal viewing.

EXIT
Used to exit the on-screen menu system.  
Used to move among the menu items.
Used to select a menu item or increase
the value of the selected item.
Used to return to the previous menu item or
decrease the value of the selected item.
-Used to confirm your
ENTER
choice.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 12
 
						

							
English-13

Plug and Play

When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.

1
If the set is in standby mode, press the 
POWER
button on the
remote control.
Result
: The message
Start Plug & Play.
is displayed. It
appears for a little while, and then the
Language
menu
is automatically displayed.

2
Select the appropriate languageby pressing the  or  button.
The available languages are listed
.Y ou can choose one of 21 languages.

3
Press the 
ENTER
button to confirm your choice.
Result
: The message
Check antenna input.
is displayed with
the
OK
selected.

4
Press the 
ENTER
button.
Result
: The following areas are available:
Belgium - France - Germany - Italy - 
Netherlands - Spain - Sweden - Switzerland - 
United Kingdom - Eastern Europe- Others
5
Select your 
Country 
by pressing the  or  button.
Press the 
ENTER
button.
Result
:The 
Auto Store
menu is displayed with the

Start 
selected.

6
Press the 
ENTER
button.
Result
:The channel search will start and end automatically.

7
Press the 
ENTER
button.
Select the houror minuteby pressing the or  button.
Set the houror minuteby pressing the  or  button.
(Refer to “
Setting and Displaying the Current Time
” on page 40)

8
Press the 
ENTER
button to confirm your setting.
Result
:Themessage 
Enjoy your watching.
is displayed, and
then the channel which has been stored will be activated.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 13
 
						

							
English-14

Plug and Play

If you want to reset this feature...

1
Press the 
MENU
button.
Result
:The main menu is displayed.

2
Press the  or  button to select 
Setup
.
Press the
ENTER
button. 
Result:The options available in the 
Setup
group are displayed.

3
The 
Plug & Play
is selected.

4
Press the
ENTER
button.
Result:The message 
Start Plug & Play. 
is displayed.

5
For further details on how to set, refer to the previous page.
This function doesn't work when source is in PC mode.

Choosing Your Language

When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.

1
Press the 
MENU
button.
Result
:The main menu is displayed.

2
Press the  or  button to select 
Setup
.
Result
:The options available in the 
Setup
group are displayed.

3
Press the
ENTER
button. 

4
Press the or buttonto select 
Language
.Press the
ENTER
button.
Result:The available languagesare listed.

5
Select a particular language by pressing the  or  button
repeatedly.
Press the

ENTER
button. 
Y ou can choose one of 21 languages.

6
When you are satisfied with your choice, press the 
EXIT
button to
return to normal viewing.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 14
 
						

							
English-15

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability\
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However,
you can sort numbers manually and clear any channels you do not wish
to watch.

1
Press the 
MENU
button.
Result
:The main menu is displayed.

2
Press the  or  button to select 
Channel
.
Result
:The options available in the 
Channel
group are displayed.

3
Press the
ENTER
button. 
Result:The 
Country
is selected.

4
Press the
ENTER
button again.  Select your 
Country
by pressing the or button repeatedly.
Result:The following countries are available:
Belgium - France - Germany - Italy - 
Netherlands - Spain - Sweden - Switzerland - 
United Kingdom - Eastern Europe- Others
5
Press the
ENTER
button. 

6
Press the or  button to select 
Auto Store
. 
Press the
ENTER
button. 
Result: The 
Auto Store
menu is displayed with the 
Start 
selected.

7
Press the 
ENTER
button to search the channels. The sub menu
is changed from
Start
to
Stop
with channel search started.
Result
: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and highest last). 
The programme originally selected is then displayed.
To  return to the previous menu, press the 
MENU
button.
To  stop the search before it has finished, press the

ENTER
button with 
Stop
selected.

8
When the channels have been stored, you can:
Sort them in the order required (refer to page 19)
Assign names to the stored channels (refer to page 20)
Add or delete the channels (refer to page 18)
Fine tune channel reception if necessary (refer to page 21)

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 15
 
						

							
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.

1
Press the 
MENU
button.
Result
:The main menu is displayed.

2
Press the or  button to select 
Channel
.
Result
:The options available in the 
Channel
group are
displayed.

3
Press the 
ENTER
button.

4
Press the or  buttonto select 
Manual Store
.Press the
ENTER
button.
Result
: The options available in the 
Manual Store
menu are
displayed with 
Programme
selected.

5
Press the 
ENTER
button again.
To  assign a programme number to a channel, find the correct
number by pressing the or  button and then press the

ENTER
button.
Y ou can also set a programme number by pressing number
buttons on the remote control.

6
Press the or  button to select 
Colour System
and then press
the 
ENTER
button. 
Select the colour standard required by pressing the or  button
repeatedly and then press the 
ENTER
button.
Result
: The colour standards are displayed in the following order: 
AUTO - PAL - SECAM - NTSC 4.43
7
Press the or  button to select 
Sound System
and then press
the 

ENTER
button.
Select the sound standard required by pressing the or  button
repeatedly and then press the 

ENTER
button.
Result
: The sound standards are displayed in the following order: 
BG - DK - I - L

English-16

Storing Channels Manually

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 16
 
						

							
8
If you know the number of the channel to be stored,Press the or  button to select 

Channel
and then press the 
ENTER
button.
Select 

C
(Air channel) or 
S
(Cable channel) by pressing the 
or button.
Press the  button to select channel.
Select the required number by pressing the or  button and
then press the 

ENTER
button.
If there is an abnormal sound or no sound, re-select the sound
system required.
Y ou can also set a 
channelby pressing number buttons on the
remote control.

9
If you do not know the channel numbers, press the or  button
to select 
Search
and then press the 
ENTER
button. 
Search
by pressingthe or  button and then press the

ENTER
button.
Result
: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.

10
Press the or  button to select 
Store
.
Select 
OK
by pressing the
ENTER
button.
Result
: The channel and associated programme number are
stored.

11
Repeat steps 
8
to 
10
for each channel to be stored.

Channel mode

P
(Programme mode): When tuning is completed, the 
broadcasting stations in your area will have been assigned 
to position numbers from P00 to P99. You can select a 
channel by entering the position number in this mode.

C 
(Real channel mode): You can select a channel by 
entering the assigned number to each broadcast station in 
this mode.

S 
(Cable channel mode): You can select a channel by 
entering the assigned number to each cable channel in this 
mode.

English-17

  Programme
:  P       1  
  Colour System
:
A UTO 
  Sound System
:
 BG 
  Channel
:    C      2
   Search
:
  48    MHz
  Store
:
?

Storing Channels Manually 

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 17
 
						

							
You can exclude the channels you chose from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.

1
Press the 
MENU
button.
Result
:The main menu is displayed.

2
Press the or  button to select 
Channel
.
Press the 
ENTER
button.
Result:The options available in the 
Channel
group are
displayed.

3
Press the or  button to select 
Add/Delete
.Press the 
ENTER
button.
Result
:The state of the current channelis displayed.

4
Press the / button to select channelthat you wish to addor delete.
Result
:If the channel that you wish to edit is not in memory, the
Add
is selected and displayed.
Otherwise, if the channel that you wish to edit is in
memory, the 

Delete
is selected and displayed.

5
Press the 
ENTER
button to addor deletechannel.

6
Press the 
MENU
button to return to the previous menu or press
the 
EXIT
button to return to normal viewing.

7
Repeat steps 
4
and 
5
for each channel to be added or deleted.
Y ou can also add or delete channel by simply pressing the 
ADD/DEL
button under the remote’s cover.

English-18

Editing the Channels

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 18