Samsung Le 32m61bs Owners Instructions

							
English-19

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you
watch most often.

1
Press the 
MENU
button.
Result
:The main menu is displayed.

2
Press the or  button to select 
Channel
.
Press the 
ENTER
button.
Result:The options available in the 
Channel
group are
displayed.

3
Press the or  button to select 
Sort
.Press the 
ENTER
button.
Result
: The 
Prog., Ch.
and 
Name
are displayed.

4
Select the channelnumber that you wish to change by pressing the
or button repeatedly.
Press the 

ENTER
button.
Result: The selected the channelnumber and nameare moved
to right side.

5
Press the or  button to move to the position in which you would
like to change and then press the 
ENTER
button.
Result
: The selected channel is exchanged with the one
previously stored to the chosen number.

6
Repeat steps 
4
to 
5
for another channel to be sorted.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 19
 
						

							
English20

Assigning Channels Names

Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Channel
.
Press the 
ENTER
button.
Result: The options available in the 
Channel
group are
displayed.

3
Press the or  button to select 
Name
.Press the 
ENTER
button.
Result
: The current
Prog., Ch.
and 
Name
are displayed.

4
If necessary, select the channel to be assigned to a new name by
pressing the or  button.
Press the 

ENTER
button.
Result
: The selection bar is displayed around the name box.

5To... Then...

Select a letter, number or symbol Press the or  button
Move on the next letter Press the  button
Move back the previous letter Press the  button
Confirm the name Press the 
ENTER
button
The characters available are :
Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters ( 

_
, space)

6
Repeat steps 
4
to 
5
for each channel to be assigned to a new name.

7
When you are satisfied with the setting, press the 
MENU
button
to return to the previous menu or press the 

EXIT
button to return to
normal viewing.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 20
 
						

							
Fine Tuning Channel Reception

If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If, however, the signal is weak or distorted, you may have to fine-tune
the channel manually.

Select the channel that you want to fine tune.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Channel
.
Press the 
ENTER
button.
Result: The options available in the 
Channel
group are
displayed.

3
Press the or  button to select 
Fine Tune
.
Press the 
ENTER
button.
Result: The horizontal bar is displayed.

4
Press the  or  button to reach the required setting.
Press the 

ENTER
button.
Result:An asterisk “*” appears on the right-hand side of the
channel number. The channel number turns red.
To  reset the fine-tuning, select 

Reset
by pressingthe or 
button and then press the 
ENTER
button.

5
When you are satisfied with the setting, press the 
MENU
button
to return to the previous menu or press the 
EXIT
button to return to
normal viewing.
Fine tuned channels that have been saved are marked with an
asterisk “*” on the right-hand side of the channel number in the
channel banner. And the channel number turns red.

English-21

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 21
 
						

							
English-22

Changing the Picture Standard

You can select the type of picture which best corresponds to your
viewing requirements.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Picture
.
Result
: The options available in the 
Picture
group are
displayed.

3
Press the 
ENTER
button.

4
Press the 
ENTER
button again.
Result
: The options available in the 
Mode
group are displayed.

5
Press the 
ENTER
button.
Result
: The 
Mode
is selected.

6
Select the required picture effect by pressing the or  button
repeatedly. 
Result
: The following picture effects are available: 
Dynamic - Standard - Movie - Custom
7
When you are satisfied with the setting, press the 
MENU
button
to return to the previous menu or press the 
EXIT
button to return to
normal viewing.
Y ou can also display by simply pressing the 
P.MODE
(Picture Mode) button.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 22
 
						

							
English-23

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Picture
.
Result
: The options available in the 
Picture
group are
displayed.

3
Press the 
ENTER
button.

4
Press the 
ENTER
button again.
Result
: The options available in the 
Mode
group are displayed.

5
Select the option (
Contrast
, 
Brightness
, 
Sharpness
, 
Colour
,
Tint
) to be adjusted by pressing the or  button. 
Press the 
ENTER
button.
Result
: The horizontal bar is displayed.

6
Press the  or  button to reach the required setting.
Press the 

ENTER
button.

7
When you are satisfied with the setting, press the 
MENU
button
to return to the previous menu or press the 
EXIT
button to return to
normal viewing.
The adjusted values are stored according to the selected Picture mode.
Each adjusted setting will be stored separately according to its
input mode.
The Tint is "inactivated" as following cases.
• Analog mode (RF, Scart, Video, S-Video)
In case of an input signal setting to PAL-50, PAL-CN,
and SECAM.
•  Component, DVI, and HDMI mode In case of an input signal setting to 60HZ; 480i, 480p,
720p @60Hz, 1080i @60Hz.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 23
 
						

							
English-24

Changing the Colour Tone
Resetting the Picture Settings to the Factor y Defaults

You can select the most comfortable colour tone to your eye.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Picture
.
Result
: The options available in the 
Picture
group are
displayed.

3
Press the 
ENTER
button.

4
Press the 
ENTER
button again.
Result
: The options available in the 
Mode
group are displayed.

5
Press the or  button to select 
Colour Tone
and press the
ENTER
button. Select the required option by pressing the 
or  button repeatedly. Press the 
ENTER
button.
Result
: The following options are available:
Cool2 - Cool1 - Normal - Warm1 - Warm2
6
When you are satisfied with your choice, press the 
EXIT
button to
return to normal viewing.
The adjusted values are stored according to the selected 
Picture mode.

Y ou can return to the factory defaults picture settings.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Picture
.
Result
: The options available in the 
Picture
group are
displayed.

3
Press the 
ENTER
button.

4
Press the 
ENTER
button again.
Result
: The options available in the 
Mode
group are displayed.

5
Press the  or  buttons to select 
Reset
, then press the
ENTER
button.

6
Press the 
EXIT
button to return to normal viewing.
The 
Reset 
will be set each picture mode.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 24
 
						

							
English-25

Changing the Picture Size

You can select the picture size which best corresponds to your viewing
requirements.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Picture
.
Result
: The options available in the 
Picture
group are
displayed.

3
Press the 
ENTER
button.

4
Pressthe or  button to select 
Size
and press the 
ENTER

button.

5
Select the required option by pressing the or  button
repeatedly.
Press the 

ENTER
button.
Result
: The following options are available:

Auto Wide
-
Wide
-
Panorama
-
Zoom
-
4:3

• 
Auto Wide
:Automatically adjusts the picture size to the “Wide”
aspect ratio.
• 

W ide
: Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
• 

Panorama
: Adjusts 16:9 to 4:3 in a natural way as for normal
broadcasting.
• 

Zoom
: Magnifies the 16:9 wide picture (in the vertical direction) to
fit the screen size. Select  by pressing the  or 
button. Use the  or  button to move the picture up and
down. After selecting  , use the  or  button to
magnify or reduce the picture size in the vertical direction.
• 

4:3
: This is the default setting for a video movie or normal
broadcasting.
You can select these options by simply pressing the 
P. S I ZE
(Picture Size) button under the remote’s cover.
In PC Mode, only 

Wide
and 
4:3
mode can be adjusted.
If you press 

P .SIZE
(Picture Size) button when PIP is set to
on, PIP function will be cancelled and the picture size will be
changed (except PC mode).

Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.

Fr eezing the Current Picture

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 25
 
						

							
English-26

Using the Digital NR (Digital Noise Reduction) Feature

If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Picture
.
Result
: The options available in the 
Picture
group are
displayed.

3
Press the 
ENTER
button.

4
Press the or  button to select 
Digital NR.
Press the 
ENTER
button.

5
Press the or  button to select 
On.
Press the 
ENTER
button.

6
Press the 
EXIT
button to return to normal viewing.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 26
 
						

							
English-27

DNIe (Digital Natural Image engine)

Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm
gives viewers brighter and clearer images.
DNIe technology will match every signal to your eyes.
You can see how DNIe improves the picture by setting DNIe Demo mode
to On.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Picture
.
Result
: The options available in the 
Picture
group are
displayed.

3
Press the 
ENTER
button.

4
Press the or  button to select 
DNIe Demo
and then press the
ENTER
button.
Press the or  button to select 
On
.
Press the 
ENTER
button.

DNIe Demo: Off
DNIe Demo mode is deactivated.

DNIe Demo: On
The right-hand side of the screen shows improved DNle
image. The left-hand side of the screen shows the
original image.
Y ou can also select these options by simply pressing the
DNIe
button.

5
When you are satisfied with your choice, press the 
EXIT
button to
return to normal viewing.
This function doesn’t work when source is in PC mode.
The 

DNle Demo
is designed to show the difference between
the regular and DNIe pictures.
By default, the product displays the picture with DNle applied.

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 27
 
						

							
My Colour Control is to adjust the most preferred colours such as Blue,
Green, Pink without interfering with other colours in order for each
consumer to enjoy the screen colour of his/her choice.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Picture
.
Result
: The options available in the 
Picture
group are
displayed.

3
Press the 
ENTER
button.

4
Press the or  buttonto select 
My Colour Control
and thenpress the 
ENTER
button.
Result
: The options available in the 
My Colour Control
menu
are displayed.

5
Press the or  button to select 
Easy Control
and press the
ENTER
button. Select a source of the sub picture by pressing
the or button and press the 
ENTER
button.
Result
: The sources are displayed in the following order: 

Blue - Green - Pink - Standard - Custom 
6
Press the or  button to select 
Detail Control
and press the
ENTER
button. Select a source of the sub picture by pressing
the or button and press the 
ENTER
button.
Result
: The sources are displayed in the following order: 
Pink - Green - Blue- Reset
7
Press the  or  button to reach the required setting.
Press the 
ENTER
button.

8
When you are satisfied with the setting, press the 
MENU
button
to return to the previous menu or press the 
EXIT
button to return to
normal viewing.
This function captures the current screen in a still image to adjust
the colour.
This function doesn't work when source is in PC mode.
To  return to the factory default settings for My Colour Control
colours, select 

Reset
by pressing the  or  button and then
press the 
ENTER
button.

English-28

My Colour Control

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 28