Samsung Le 32m61bs Owners Instructions
Here you can view all the pages of manual Samsung Le 32m61bs Owners Instructions. The Samsung manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 61
English-59 Troubleshooting: Before Contacting Ser vice Personnel Before contacting Samsung after-sales service, perform the following sim\ ple checks. If you cannot solve the problem using the instructions below, note the model and serial number of your set and contact your local dealer. No sound or picture Normal picture but no sound No picture or black and white picture Sound and picture interference Blurred or snowy picture, distorted sound Remote control malfunctions “Check signal cable.” message...
Page 62
English-60 Installing the Wall Mount Kit This installation is to be used when attaching the wall mount to a concr\ ete wall. When attaching to other building materials, please contact your nearest \ dealer. Components (Sold separately) Wall-Bracket Set-Bracket Screw: 8EA Wood Screw: 7EA Anchor: 7EA Screw: 3EA Installation Guide How to assemble the Wall Mount Bracket 1 Mark the location of hole on the wall. Drill a hole of 35mm depth on the marked location.Fix anchors on each hole on the wall....
Page 63
English-61 Installing the Wall Mount Kit 2 Turn the power off and unplug the power cord from the outlet.Place the TV faced down on a soft cloth or cushion on a table. Remove the four screws from the back of the TV. Separate the stand from the TV. Cover the bottom hole with a cap Loosen two screws on the rear side of the TV set (only model LE40M6 applied). Attach the set-bracket onto the rear side of the TV set and secure the screws . For 40 inches model, attach the bracket into the two holes with the...
Page 64
English-62 Installing the Stand 1. Place the TV faced down on a soft cloth or cushion on a table. 2. Attach the stand to the TV set as shown in the picture. 3. Use the four screws to tightly fix the stand. < 2 > < 3 > Stand Swivel Function Maximizing space is available with Stand swivel functionThis product supports left/right swivel function on the desk.•You can adjust the angle up to 15° to the left or right. Please move away all the stuff around the monitor. There should be enough...
Page 65
English-63 Using the Anti-Theft Kensington Lock 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). 2. Connect the Kensington lock cable. 3. Fix the Kensington lock to a desk or a heavy stationary object. The Kensington lock is a device used to physically fix the system when u\ sing it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the...
Page 66
English-64 Technical and Environmental Specifications Model NameLE32M6/LE32M61BS LE40M6/LE40M61BS Panel Size 32" Diagonal (16:9) 40" Diagonal (16:9) Display Size 697.68 (H) x 392.26 (V) mm 885.17(H) x 497.66(V) mm (27.47 (H) x 15.44 (V) inches) (34.85(H) x 19.59(V) inches) T ype a-si TFT active matrix a-si TFT active matrix Pixel Pitch 0.511 (H) x 0.511 (V) mm 0.648(H) x 0.216(V) mm (0.0201 (H) x 0.0201(V) inches) (0.027(H) x 0.0085(V) inches) V iewing Angle 178/178 (H/V) 178/178(H/V)...
Page 67
English-65 Technical and Environmental Specifications Display Mode (PC) Both screen position and size will vary depending on the type of PC moni\ tor and its resolution. The table below shows all of the display modes that are supported: Mode Resolution Horizontal Vertical Pixel Clock Sync Polarity Frequency (kHz) Frequency (Hz) Frequency (MHz) (H/V) IBM 640 x 480 31.469 59.940 25.175 - / - 720 x 400 31.469 70.087 28.322 - / + VESA 640 x 480 37.861 72.809 31.500 - / - 640 x 480 37.500 75.000 31.500 -...
Page 68
English-66 Pin Configurations SCART Connector Pin Signal 1Audio output R 2 Audio input R 3 Audio output L 4 Audio chassis return 5V ideo chassis return (RGB blue) 6 Audio input L 7 RGB blue input 8 Switching voltage 9V ideo chassis return (RGB green) 10 AV-Link (Ext 1) 11 RGB green input Pin Signal 12 - 13 Video chassis return (RGB red) 14 - 15 RGB red input 16 Blanking signal (RGB switching) 17 Video chassis return 18 Blanking signal ground 19 Video output 20 Video input 21 Screening/chassis...