Samsung Le 32m61bs Owners Instructions

English-49

Coarse and Fine Tuning of the Image

The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone, then
adjust the frequency as best as possible (coarse) and Fine-tune again.\
After the noise has been reduced, re-adjust the picture so that it is
aligned on the center of screen.

Press the 
PC
button under the remote’s cover to select the PC mode.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the...

English-50

Changing the Image Position

Press the 
PC
button under the remote’s cover to select the PC mode.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Setup
.
Press the 
ENTER
button.
Result
: The options available in the 
Setup
group are displayed.

3
Press the or  button to select 
PC
.
Press the 
ENTER
button.
Result
: The options available in the
PC
menu are displayed.

4
Press the or  button to select 
Position
.Press the 
ENTER
button....

English-51

Initializing the Image Settings

You can replace all image settings with the factory default values.

Press the 
PC
button under the remote’s cover to select the PC mode.

1
Press the 
MENU
button.
Result
: The main menu is displayed.

2
Press the or  button to select 
Setup
.
Press the 
ENTER
button.
Result
: The options available in the 
Setup
group are displayed.

3
Press the or  button to select 
PC
.
Press the 
ENTER
button.
Result
: The options available in the
PC
menu are displayed....

English-52

Teletext Decoder

Most set channels carry “ teletext ”, pages of written information\
 that
provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:

Part Contents

A Selected page number.
B Broadcasting station identity.
C Current page number or search status.
D Date and time.
ET ext.
F Status information.

Displaying the Teletext...

Press the number buttons on the remote control to enter the page
number directly:

1
Enter the three-digit page number listed in the contents by pressing the\
corresponding numeric buttons.
Result
:The current page counter is incremented and the page is
then displayed.

2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display on
a given page, press the 

PRE-CH
()
.
Press the 
PRE-CH 
()
button again to resume.

3
Using the...

English-54

Using Fastext to Select a Teletext Page

The various topics included in the teletext pages are colour-coded, and
can be selected by pressing the coloured buttons on the remote control.

1
Display the teletext contents page by pressing the 
TTX/MIX
(
/
) 
button.

2
Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line)\
.
Result:
The page is displayed with additional colour-coded
information that can be...

English-55

Setting Up Your Remote Control

After it has been set up properly, your remote control can operate in five
different modes: TV, VCR, Cable, DVD, Set-Top Box. Pressing the
corresponding button on the remote control allows you to switch
between these modes, and control whichever piece of equipment you
choose.
Note
The remote control might not be compatible with all DVD Players,
VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR

1
Turn off your VCR.

2
Press the...

English-56

Setting Up Your Remote Control

Setting Up the Remote to Operate Your Cable Box

1
Turn off your cable box.

2
Press the 
MODE
button and make sure that the CATV appears on
the LCD screen.

3
Press the 
SET
button on your TV’s remote control.

4
Using the number buttons on your remote control, enter three digits
of the cable box code listed on page 58 of this manual for  your
brand of cable box. Make sure you enter three digits of the code,
even if the first digit is a “0”.
If there is more...

English-57

Setting Up Your Remote Control

Setting Up the Remote to Operate Your DVD

1
Turn off your DVD.

2
Press the 
MODE
button and make sure that the DVD appears on the
LCD screen.

3
Press the 
SET
button on your TV’s remote control.

4
Using the number buttons on your remote control, enter three  digits
of the DVD code listed on page 58 of this manual for your brand of
DVD. Make sure you enter three digits of the code, even if the first
digit is a “0”.
If there is more than one code listed, try...

English-58

Setting Up Your Remote Control

Remote Control Codes

Brand

Aiwa
Curtis Mathes
Funai
GE
Hitachi
JC Penny
Kenwood
Magnavox
Marantz
NEC
Panasonic
Philco
Philips
Pioneer
RCA
Samsung
Sanyo
Sears
Sharp
Sony
Sylvania
Toshiba

Code

025
002  017  007  008 021  025  056  064  066
025
017 002 021  005  056
019  025  041  042
002  007  018  019  021  026 037  041  054  056
007  008  018  026  037
021  036  056  059
008  007  018  021  026  036  037   062
018  007  026  037  008  062  064
021  056...