Samsung Le 32m61bs Owners Instructions

English-9

Viewing the Remote Control(Teletext Functions)

Exit from the teletext display
P: T eletext next page
P:  T eletext previous page

Teletext Function : Refer to pages 52-54 for details

Teletext display/mix both
teletext information and the normal broadcast
T eletext sub page T
eletext cancel
Teletext hold
Teletext mode selection
(LIST/FLOF)
T eletext reveal
Teletext index
Teletext size selectionTeletext store

01 BN68-00956D-04Eng.qxd  11/29/05  4:14 PM  Page 9
 

English-10

Installing Batteries in the Remote Control

1
Slide the cover out completely.

2
Install two AAA size batteries.
Makesure to match the “+” and “–” ends of the batteries with
the diagram inside the compartment.

3
Replace the cover.
Remove the batteries and store them in a cool, dry placeif you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)

If the remote...

English-11

Switching On and Off

The mains lead is attached to the rear of your set.

1
Plug the mains lead into an appropriate socket.
Result
:The standby indicator lights up on the front panel.
The main voltage is indicated on the rear of your set and the frequency is 50 or 60Hz.

2
Press the 
POWER
button on the front of the panel.
Result
:The programme that you were watching last is reselected
automatically.

3
Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or...

English-12

Becoming Familiar with the Remote Control

The remote control is used mainly to:Change channels and adjust the volume.
Set up your set using the on-screen menu system.
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function

Used to display the -next stored channel.
Used to display the -previous stored channel.
to Used to display the corresponding channels.
For double digit channels, the second digit must be pushed immediately...

English-13

Plug and Play

When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.

1
If the set is in standby mode, press the 
POWER
button on the
remote control.
Result
: The message
Start Plug & Play.
is displayed. It
appears for a little while, and then the
Language
menu
is automatically displayed.

2
Select the appropriate languageby pressing the  or  button.
The available languages are listed
.Y ou can...

English-14

Plug and Play

If you want to reset this feature...

1
Press the 
MENU
button.
Result
:The main menu is displayed.

2
Press the  or  button to select 
Setup
.
Press the
ENTER
button. 
Result:The options available in the 
Setup
group are displayed.

3
The 
Plug & Play
is selected.

4
Press the
ENTER
button.
Result:The message 
Start Plug & Play. 
is displayed.

5
For further details on how to set, refer to the previous page.
This function doesn't work when source is in PC mode.

Choosing...

English-15

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability\
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However,
you can sort numbers manually and clear any channels you do not wish
to watch.

1
Press the 
MENU
button.
Result
:The main menu is displayed.

2
Press the  or  button to select 
Channel
.
Result
:The options available in the 
Channel
group are...

You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.

1
Press the 
MENU
button.
Result
:The main menu is displayed.

2
Press the or  button to select 
Channel
.
Result
:The options available in the 
Channel
group are
displayed.

3
Press the 
ENTER
button.

4
Press the or  buttonto select 
Manual Store
.Press...

8
If you know the number of the channel to be stored,Press the or  button to select 

Channel
and then press the 
ENTER
button.
Select 

C
(Air channel) or 
S
(Cable channel) by pressing the 
or button.
Press the  button to select channel.
Select the required number by pressing the or  button and
then press the 

ENTER
button.
If there is an abnormal sound or no sound, re-select the sound
system required.
Y ou can also set a 
channelby pressing number buttons on the
remote control.

9
If you do not know...

You can exclude the channels you chose from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.

1
Press the 
MENU
button.
Result
:The main menu is displayed.

2
Press the or  button to select 
Channel
.
Press the 
ENTER
button.
Result:The options available in the 
Channel
group are
displayed.

3
Press the or  button to select 
Add/Delete
.Press the...