Samsung Intensity 1 Owners Manual

							269.
An CONTACT UPDATED or CONTACT SAVED pop-up screen 
with a selection list of entry types displays. Press the 
 Directional key up or down to highlight the desired 
type then press  . The number is added to the selected 
entry and saved to your Contacts.
10.For Update Existing, highlight the desired contact and press 
.
11.Press the  Directional key to highlight the desired 
entry type and press  .
12.Press  SAVE to save the new entry.
Deleting Call Histor y Entries
1.From the home screen, press   then press the  
Directional key up or down until the desired number is 
highlighted. Press the right soft key   Options. A pop-
up menu appears in the display.
2.Press the   Directional key down to highlight 
Erase and press  . Select Ye s or No at the ERASE 
ENTRY? pop-up screen.
3.Press .
Deleting All Call Histor y Entries
1.From the home screen, press  .
2.Press the right soft key   Options. A pop-up menu 
appears in the display.
3.Press the  Directional key down to highlight Erase 
All and then press  . Select Ye s or No at the ERASE 
ALL? pop-up screen.
4.Press .
u450.book  Page 26  Wednesday, August 19, 2009  6:03 PM 
						

							Call Functions       27
Contacts
Making Calls Using Contacts
Contacts are entries that you create to store names, numbers, 
and other information for people or groups of interest. If you’ve 
already entered information into your Contacts list, you can recall 
and dial the contact easily. For more information, refer to “Adding 
a Contact”  on page 47. 
1.From the home screen, press the right soft key   
Contacts. Press the 
 Directional key up or down 
until the contact that you want to call is highlighted then 
press  VIEW. Details for the contact appear in the 
display.
Note: To quickly locate a name, press (or multi-press) any key on the keypad 
that corresponds to the first, second, and/or third letters of the 
contact’s name.
2.If the entry contains more than one number, press the 
 Directional key up or down to highlight the desired 
number.
3.Press   to call the number.
Roaming
What is Roaming?
Your phone can roam on other compatible digital networks. 
Roaming occurs when you travel outside a pre-designated 
coverage area. The roaming icon displays when roaming is active 
and extra charges may apply when making or receiving calls.
Note: Some features may be unavailable while roaming. 
Roaming Options
The following roaming options are available:–Home Only - Your phone is available for normal operation only in the 
designated coverage area.
–Automatic-A: The preferred “A” side carrier roaming list is used to 
acquire service.
–Automatic-B: The preferred “B” side carrier roaming list is used to 
acquire service.
Note: Contact Verizon Wireless for information regarding preferred systems.
To change your Roaming option, follow these steps:
1.Using the default My Place display theme, Grid menu 
layout: From the home screen, press   
MENU.
u450.book  Page 27  Wednesday, August 19, 2009  6:03 PM 
						

							282.
Press the  Directional key to highlight   
Settings & Tools menu and press  . 
3.Press  Phone Settings. 
4.Press  System Select.
5.Press the  Directional key up or down to choose the 
setting you want, and press  . 
Voice Commands
Voice Commands is advanced speech recognition software that 
can be used to activate a wide variety of functions on your phone. 
Voice Commands software automatically voice activates all 
contacts for voice dialing and searching, no pre-recording or 
training needed. Speak phone numbers naturally to dial, and use 
voice commands to navigate phone menus.
Voice Commands Settings
You can adjust the settings and preferences by opening Voice 
Commands menu. Using this menu, you can change the 
following Voice Command features:
1.From the home screen, 
press the 
Voice 
Commands
 key   
on the right side of the 
phone. The Voice 
Commands screen 
appears in the display.
2.Press the right soft key 
 
Settings.The 
following options appear 
in the display:
: Reads out the text in a TXT message.
 Confirm Choices: Choose from Automatic, Always Confirm, or 
Never Confirm.
 Sensitivity: Sensitivity controls the balance between rejecting too 
much, which means the phone frequently does not recognize 
names, numbers, or commands, and rejecting too little, which 
means it frequently recognizes something even if nothing was said. 
 
Choose from More Sensitive, Automatic, or Less Sensitive.
 Adapt Voice: Use the Adapt Voice menu to adapt digit dialing and 
name dialing to your voice.
–Adapt VoiceMode: Lets you adapt your voice, which can improve 
speech recognition. Adaptation takes about 60 seconds.
u450.book  Page 28  Wednesday, August 19, 2009  6:03 PM 
						

							Call Functions       29 –
Reset VoiceMode: Erases any VoiceMode adaptation you have done 
and resets VoiceMode recognition to the factory default. If you have not 
adapted your voice, this option is grayed out.
: Turns playback on or off for prompts such as “Please say 
a command.”
–Mode: Allows you to select the Prompt Mode you prefer. Choose from 
Prompts, Readout+Alerts, Readout, or Tones Only.
–Audio Playback: Allows audio playback to play through the 
speakerphone or through the earpiece.
 Key Settings: Allows you to select the method by which the Voice 
Command menu can be accessed. Select Voice Key Only or Voice 
Key/EarMic.
Voice Commands
The following is a list of functions that you can perform using 
Voice Commands speech recognition on your phone.
Call : Dial by saying 
a Name in your Contacts List, a 
Name and a Location (home, 
work, mobile) or the phone 
number.
Send : Send a text 
or picture message to a number 
or to someone in your Contacts 
List.
Go To : Open any 
application installed on your 
device.
Check : Provides details 
of your phone status, voicemail, messages, missed calls, time, signal 
strength, battery level, volume level, balance, minutes, payment, and 
My Number.
Contacts : Open the contact record for any name in your 
Contacts List.
Redial: Allows you to call the last number dialed.
Play : Opens a music playlist.
u450.book  Page 29  Wednesday, August 19, 2009  6:03 PM 
						

							30
My Verizon: Provides information about your Verizon Wireless 
account. 
Help: Provides a helpful tutorial on how to use Voice Commands.
Call 
Call Digit Dialing
Digit Dial allows you to dial any phone number by simply 
speaking the digits into the phone. No training is necessary, and 
Digit Dial is programmed to understand natural speech.
1.From the home screen, press the Voice Commands 
key .
2.After a brief pause, a list of optional commands appears in 
the display and the audio prompt Please say a command 
plays through the earpiece or speakerphone.
3.After the beep, say “Call” at a distance of 3-12 inches from 
the phone in a natural voice.
4.“Please say the name, number, voice mail or last number” 
plays through the earpiece or speakerphone.
5.After the beep, say the area code and number that you 
want to dial into the microphone, clearly and naturally.
6.The number that you said is repeated through the speaker 
and your phone dials the number.
7.If Voice Commands is not sure of the number that you said, 
a list of possible matches appears in the display.
8.You’re asked to confirm the correct number as Voice 
Commands displays the results. 
Say “Ye s” to confirm the number.
Say “No” to reject the number.
Say “Repeat” to have the selected number read one more time.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in your 
Contacts list. See page 47 for information on creating a Contacts 
list.
1.From the home screen, press the Voice Commands 
key .
2.After a brief pause, a list of optional commands appears in 
the display and the audio prompt “Please say a command” 
plays through the earpiece or speakerphone.
3.After the beep, say “Call” at a distance of 3-12 inches from 
the phone in a natural voice.
u450.book  Page 30  Wednesday, August 19, 2009  6:03 PM 
						

							Call Functions       31 4.
“Please say the name, number, voice mail or last number” 
plays through the earpiece or speakerphone.
5.To use Name Dialing, after the beep, say the name of the 
contact that you want to dial.
6.The name that you said is repeated through the speaker 
and your phone dials the number.
7.If Voice Commands is not sure of the number that you said, 
a list of possible matches appears in the display.
8.You’re asked to confirm the correct number as Voice 
Commands displays the results. 
Say “Ye s” to confirm the number.
Say “No” to reject the number.
Say “Repeat” to have the selected number read one more time.
Note:  In case various number are displayed , “Which Number?” will display in the Listening menu option.
9.The location is repeated through the speaker and your 
phone dials the number.
Send 
Send Text
1.From the home screen, press the Voice Commands 
key .
2.A list of commands appears in the display and the audio 
prompt “Please say a command” plays through the 
earpiece or speakerphone.
3.After the beep, say “Send Text” at a distance of 3-12 
inches from the microphone. “Please say the name or 
number” plays through the earpiece or speakerphone.
4.After the beep, say the name exactly as it is displayed in 
your Contacts list, first name followed by last name or the 
phone number of the recipient. 
Note: In case various number are displayed , “Which Number?” will display in the Listening menu option.
5.The contact name appears in the To: field. For more 
information, refer to “Creating and Sending Text 
Messages”  on page 61. 
u450.book  Page 31  Wednesday, August 19, 2009  6:03 PM 
						

							32
Send Picture
Send Picture allows you to access the Picture Messaging menu. 
You can use entries stored in My Pictures or you can take a 
picture of an image using the camera.
1.From the home screen, press the Voice Commands 
key .
2.A list of commands appears in the display and the audio 
prompt Please say a command plays through the 
earpiece or speakerphone.
3.After the beep, say “Send Picture” at a distance of 3-12 
inches from the microphone. “Please say the name or 
number” plays through the earpiece or speakerphone.
4.Say the name exactly as it is displayed in your Contacts 
list, first name followed by last name.
Note: In case various number are displayed , “Which Number?” will display in the Listening menu option.
5.The contact name appears in the To: field. For more 
information, refer to “Creating and Sending Picture 
Messages”  on page 62.
Go To 
The “Go To” command allows you to access a menu within the 
phone (for example, “Go To Contacts”). If no menu option is 
stated, a list of options will be provided.
Opening Menus and Applications
To navigate menu items on your phone or to open select 
applications using Voice Commands, perform the following: 
1.From the home screen, press the Voice Commands 
key .
2.A list of commands appears in the display and the audio 
prompt “Please say a command” plays through the 
earpiece or speakerphone.
3.To begin navigation of menu items, after the beep, say “Go 
To” at a distance of 3-12 inches from the microphone. The 
menu list displays and a prompt of “Please choose” plays 
through the earpiece or speakerphone.
Note: User can “Go To” any menu directly, but the screen name spoken must 
match what displays on the menu item list, e.g., “Go to Airplane 
Mode.”
u450.book  Page 32  Wednesday, August 19, 2009  6:03 PM 
						

							Call Functions       33 4.
Select one of the following menus or applications: 
Contacts, Recent Calls, Messaging, Media Center, Settings & 
Tools
, Mobile Web or My Music. The option spoken opens.
Check 
Checking Phone Status
Note: Checking Phone Status can be accessed with the phone slide in either the closed or open position.
1.From the home screen, press the Voice Commands 
key .
2.A list of commands appears in the display and the audio 
prompt “Please say a command” plays through the 
earpiece or speakerphone.
3.After the beep, say “Check” at a distance of 3-12 inches 
from the microphone. “Please choose” plays through the 
earpiece or speakerphone. Valid “Check” commands are:
 Status: Displays and announces all of the available status 
indicators in sequence through the earpiece or speakerphone—if it 
is enabled.
 Voicemail: Displays the number of new voicemail messages.
 Messages: Displays and announces the number of new voicemail, 
TXT, and Picture messages through the earpiece or 
speakerphone—if it is enabled.
 Missed Calls: Displays the missed call log.
: Displays and announces the current time through the 
earpiece or speakerphone—if it is enabled.
 Signal Strength: Displays and announces the current 1x signal 
strength level through the earpiece or speakerphone—if it is 
enabled.
 Battery Level: Displays and announces the current battery level 
through the earpiece or speakerphone—if it is enabled.
: Displays and announces the current volume level through 
the earpiece or speakerphone—if it is enabled.
 Balance: Calls the service number for your handset so that balance 
information can be obtained through the earpiece or 
speakerphone—if it is enabled.
 Minutes: Calls the service number for your handset so that minutes 
information can be obtained through the earpiece or 
speakerphone—if it is enabled.
: Calls the service number for your handset so that 
payment information can be obtained through the earpiece or 
speakerphone—if it is enabled.
 My Number: Displays and announces the handset phone number 
through the earpiece or speakerphone—if it is enabled.
u450.book  Page 33  Wednesday, August 19, 2009  6:03 PM 
						

							34
Contacts 
To perform a name lookup, you’ll need to have some entries in 
your Contacts list. 
1.From the home screen, press the Voice Commands 
key .
2.A list of commands appears in the display and the audio 
prompt “Please say a command” plays through the 
speakerphone.
3.In a single command, after the beep, say “Lookup” 
followed by the name of a contact entry at a distance of 3-
12 inches from the microphone. For example, you could 
say “Lookup John Smith.” 
4.If you only say “Lookup”, “Please say the name” plays 
through the speakerphone. 
To use Lookup, say the name of the contact that you want 
to look up. 
5.After the beep, say the name exactly as it is displayed in 
your Contacts list, first name followed by last name.
6.The contact name appears in the display with other 
information that you’ve entered for that contact.
Redial
1.From the home screen, press the Voice Commands 
key . 
2.A list of commands appears in the display and the audio 
prompt “Please say a command” plays through the 
earpiece or speakerphone.
3.In a single command, after the beep, say “Redial”.
4.The last number dialed is redialed.
Play 
Play
1.From the home screen, press Voice Commands 
key .
2.A list of commands appears in the display and the audio 
prompt “Please say a command” plays through the 
earpiece or speakerphone.
Say “Play” at a distance of 3-12 inches from the microphone. The 
Music Library displays.
Say “Play All” or “Play All Songs” at a distance of 3-12 inches from 
the microphone to play all songs on your device.
3.The option spoken opens.
u450.book  Page 34  Wednesday, August 19, 2009  6:03 PM 
						

							Call Functions       35
My Verizon
Check your Verizon Wireless account status by voice command.
Note: This features launches the browser to your account page and requires a data plan and is subject to Verizon Wireless data coverage.
Help
Provides helpful information on how to use Voice Commands.
1.From the home screen, press the Voice Commands 
key . 
2.A list of commands appears in the display and the audio 
prompt “Please say a command” plays through the 
earpiece or speakerphone.
3.Say, Help at a distance of 3-12 inches from the phone in 
a natural voice. The tutorial appears in the display.
u450.book  Page 35  Wednesday, August 19, 2009  6:03 PM