Samsung Intensity 1 Owners Manual

							12611.
When all fields have correct information entered, press 
 SAVE to save your settings.
Disable an alarm before it sounds
1.From the home screen, press   MENU. Press the  
Directional key to highlight the  Settings & Tools 
menu and press  . 
2.Press  To o l s ,   Alarm Clock. The Alarm 
Clock menu displays with the Alarm 1 highlighted.
3.Highlight the alarm you wish to disable, then press the 
right soft key   Options. A pop-up menu appears in the 
display.
4.Press  Turn Off to turn the highlighted alarm off. 
Press  Reset to reset the highlighted alarm or 
press  Reset All to reset all of the alarms.
Snooze
Note: When an alarm sounds, a menu screen displays that allows you to 
either turn the alarm off or to have the alarm ring again after 5 
minutes.
Stop Watch
This feature allows you to use a stopwatch. Press the   START 
to start the stopwatch. Press   STOP to stop stopwatch. Press 
the right soft key   Reset to erase recorded stopwatch time.
1.From the home screen, press   MENU. Press the  
Directional key to highlight the   Settings & Tools 
menu and press  . 
2.Press  To o l s,  Stop Watch. Stop Watch 
display appears. 
3.Press the   START to start the stopwatch. 
4.Press the left soft key  Record to record split times.
5.Press  STOP to stop stopwatch. 
6.Press the right soft key  Reset to erase recorded 
stopwatch time. To return to the home screen, press  . 
World Clock
World Clock allows you to view the time of day or night in any 
part of the world.
1.From the home screen, press   MENU. Press the  
Directional key to highlight the   Settings & Tools 
menu and press  . 
u450.book  Page 126  Wednesday, August 19, 2009  6:03 PM 
						

							Tools       127 2.
Press  Tools,  World Clock.
3.Use the left soft key   Cities to display the 45 
supported cities. Select a city and press   to view your 
entry.
4.Press the right soft key   DST On/Off to set the 
daylight savings time option.
5.You can scroll through other cities by pressing the  
Directional keys left or right. To return to the home screen, 
press . 
Notepad
Create, store and edit notes in Notepad.
1.From the home screen, press   MENU. Press the  
Directional key to highlight the   Settings & Tools 
menu and press  . 
2.Press  Tools,  Notepad.
3.If you have any stored notes, they appear as a list in the 
display. If this is your first time in Notepad, No Notes 
displays. To add a new note, press the left soft key   
Add, then enter the note using the keypad.
4.While entering a note, press the left soft key   Abc, to 
display a pop-up menu with the following Entry Modes:
In Portrait: T9 Word, Palabra, Abc, 123, and Symbols.
In Landscape (QWERTY): Abc, ABC, and Symbols
Tip: For more information on entering text, see “Entering Text” on page 43.
5.Select a Text Mode and press   or press   to exit 
the pop-up menu.When you’re finished entering details for 
the note, press  . The note is saved.
Review, Edit, and Erase Notes
1.From the home screen, press   MENU. Press the  
Directional key to highlight the   Settings & Tools 
menu and press  .
2.Press  Tools,  Notepad. The Notepad 
menu opens. If you have any stored notes, they appear as 
a list in the display. 
3.Press the  Directional key up or down to highlight a 
note. With a note highlighted, press the right soft key   
Options. A pop-up menu with the options listed in the 
following table appears in the display:
u450.book  Page 127  Wednesday, August 19, 2009  6:03 PM 
						

							128
: Edit the note currently highlighted or appearing in the display.
: Erase the note currently highlighted or appearing in the 
display.
: Allows you to erase selected notes. Press   Mark to mark a specific note to be erased or press the right soft 
key  to Mark All. Press the left soft key   Done to erase 
the notes.
: Locks or unlocks the entry to prevent accidental 
deletion.
4.Highlight an option or press   to exit the menu. 
5.Press   to perform the highlighted option’s function.
USB Mass Storage
Connect your phone to your PC with a USB cable. Make sure that 
a memory card has been inserted into the phone slot. For more 
information, refer to “Inserting and Removing Your Memory Card”  
on page 10.
1.From the home screen, press   MENU. Press the  
Directional key to highlight the   Settings & Tools 
menu and press  . 
2.Press  To o l s ,   USB Mass Storage.
u450.book  Page 128  Wednesday, August 19, 2009  6:03 PM 
						

							Mobile Web       129
Section 12: Mobile Web
This section outlines the mobile web options available.
Mobile Web 
Mobile Web allows you to surf the web from your wireless phone.
If you receive a call while using Mobile Web, the web session is 
suspended during the call. Once the call ends, your Mobile Web 
session resumes where you left off.
Note: This feature is currently unavailable outside of the United States. Only 
available within the Verizon Wireless Enhanced Services Area.
Any time the service indicator icon is visible, you are connected to the 
Internet and billed accordingly. Rates and prices vary according to your 
service contract. For further information on billing contact Verizon 
Wireless.
Launching Mobile Web 
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhanced Services Area.
1.From the home screen, press the  Directional key 
up. Mobile Web and a list of categories (representing one 
or more web sites) appears in the display. 
2.Press the  Directional key in any direction to browse 
the categories.
3.Once the desired category is highlighted, press   to 
enter the category list.
Exit Mobile Web 
To exit the Mobile Web, press the   key.
Navigate the Web 
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhanced Services Area.
When you use Mobile Web, some of the keys operate differently 
than during a normal phone call.
Mobile Web presents on-screen items in any of the following 
ways:
–Text or numeric input–Links (embedded in content)–Numbered options (some options may not be numbered)–Simple text
You can act on the options or links by using the soft keys.
u450.book  Page 129  Wednesday, August 19, 2009  6:03 PM 
						

							130
Mobile Web Soft Keys 
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhanced Services Area.
At the bottom of the Mobile Web display contains the browser 
commands. The left   and right  soft keys on the keypad 
are used to perform the commands in the display. These are 
called “soft keys” because their function changes depending 
where you are in the application.
How Mobile Web keys work
The following table lists Mobile Web keys and functions.
Directional Key: Press the Directional key in any 
direction to browse lists and highlight options.
CLR Key: A browser back-up key. Press once to back 
up one page. Press and hold to go back to Mobile Web 
home page.
Press to clear the last number, letter, or symbol 
entered. Press and hold to completely clear the display.
Numbers 1 - 0: Use the number keys to select items 
in a menu if they are numbered.
END Key: Press to exit Mobile Web and return the 
phone to home screen.
Left Soft Key: Press the left soft key to go to the 
highlighted web link and/or perform the function above 
it in the display.
Right Soft Key: The right soft key is the Menu key. 
Press this key to display a pop-up menu with several 
options.
SEND Key: Press to dial a highlighted number.
u450.book  Page 130  Wednesday, August 19, 2009  6:03 PM 
						

							Mobile Web       131
Links 
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhanced Services Area.
Links can serve several purposes, such as jumping to a different 
page, to a different site, or initiating a phone call. Links are 
underlined (__). Normally, the left soft key   or   is used 
to select a highlighted link.
Place a Call While Using Mobile Web 
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhanced Services Area.
You can place a call while using Mobile Web if the website 
supports this feature. Press the appropriate soft key to call the 
number. In most cases you can also press   to call the number. 
The Internet connection terminates when you initiate the call. 
After you end the call, the Resume Browser screen displays.
u450.book  Page 131  Wednesday, August 19, 2009  6:03 PM 
						

							132
Section 13: Health and Safety Infor mation
This section outlines the safety precautions associated with using 
your phone. These safety precautions should be followed to 
safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Cer tification Infor mation (SAR)
Your wireless phone is a radio transmitter and receiver. It is 
designed and manufactured not to exceed the exposure limits for 
radio frequency (RF) energy set by the Federal Communications 
Commission (FCC) of the U.S. government. 
These FCC exposure limits are derived from the 
recommendations of two expert organizations, the National 
Counsel on Radiation Protection and Measurement (NCRP) and 
the Institute of Electrical and Electronics Engineers (IEEE). 
In both cases, the recommendations were developed by scientific 
and engineering experts drawn from industry, government, and 
academia after extensive reviews of the scientific literature 
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones 
employs a unit of measurement known as the Specific 
Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of 
watts per kilogram (W/kg). The FCC requires wireless phones to 
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg). 
The FCC exposure limit incorporates a substantial margin of 
safety to give additional protection to the public and to account 
for any variations in measurements. 
SAR tests are conducted using standard operating positions 
accepted by the FCC with the phone transmitting at its highest 
certified power level in all tested frequency bands. Although the 
SAR is determined at the highest certified power level, the actual 
SAR level of the phone while operating can be well below the 
maximum value. This is because the phone is designed to 
operate at multiple power levels so as to use only the power 
required to reach the network. In general, the closer you are to a 
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it 
must be tested and certified to the FCC that it does not exceed 
the exposure limit established by the FCC. Tests for each model 
phone are performed in positions and locations (e.g. at the ear 
and worn on the body) as required by the FCC. 
u450.book  Page 132  Wednesday, August 19, 2009  6:03 PM 
						

							Health and Safety Information       133
For body worn operation, this phone has been tested and meets 
FCC RF exposure guidelines when used with an accessory that 
contains no metal and that positions the handset a minimum of 
1.5 cm from the body. 
Use of other accessories may not ensure compliance with FCC RF 
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile 
phone with all reported SAR levels evaluated as in compliance 
with the FCC RF exposure guidelines. The maximum SAR values 
for this model phone as reported to the FCC are:
Part 22:
Head: 0.456 W/Kg.
Body-worn: 0.981W/Kg.
Part 24:
Head: 0.727 W/Kg.
Body-worn: 0.579 W/Kg.
SAR information on this and other model phones can be viewed 
online at http://www.fcc.gov/oet/ea. To find information that 
pertains to a particular model phone, this site uses the phone 
FCC ID number which is usually printed somewhere on the case 
of the phone. 
Sometimes it may be necessary to remove the battery pack to 
find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it 
should provide values for typical or maximum SAR for a particular 
phone. Additional product specific SAR information can also be 
obtained at 
www.fcc.gov/cgb/sar. 
Warning Regarding Display
The display on your handset is made of glass or acrylic and could 
break if your handset is dropped or if it receives significant 
impact. Do not use if screen is broken or cracked as this could 
cause injury to you.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its 
customers to recycle Samsung mobile phones and genuine 
Samsung accessories.
Go to: 
https://fun.samsungmobileusa.com/recycling/index.jsp for more 
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety 
requirements. Please adhere to the following safety instructions 
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD 
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY 
DAMAGE.
u450.book  Page 133  Wednesday, August 19, 2009  6:03 PM 
						

							134
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE 
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE 
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER 
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS 
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR 
HORIZONTAL OR FLOOR MOUNT POSITION.    
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a 
series of Questions and Answers for consumers relating to radio 
frequency (RF) exposure from wireless phones. The FDA 
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless 
phones with built-in antennas, often called cell, mobile, or 
PCS phones. These types of wireless phones can expose the 
user to measurable radio frequency energy (RF) because of the 
short distance between the phone and the users head. These RF 
exposures are limited by Federal Communications Commission 
safety guidelines that were developed with the advice of FDA and 
other federal health and safety agencies.When the phone is located at greater distances from the user, the 
exposure to RF is drastically lower because a persons RF 
exposure decreases rapidly with increasing distance from the 
source. The so-called cordless phones, which have a base unit 
connected to the telephone wiring in a house, typically operate at 
far lower power levels, and thus produce RF exposures well 
within the FCCs compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health 
problems are associated with using wireless phones. There is no 
proof, however, that wireless phones are absolutely safe. 
Wireless phones emit low levels of radio frequency energy (RF) in 
the microwave range while being used. They also emit very low 
levels of RF when in the stand-by mode. Whereas high levels of 
RF can produce health effects (by heating tissue), exposure to 
low level RF that does not produce heating effects causes no 
known adverse health effects. Many studies of low level RF 
exposures have not found any biological effects. Some studies 
have suggested that some biological effects may occur, but such 
findings have not been confirmed by additional research. In some 
cases, other researchers have had difficulty in reproducing those 
studies, or in determining the reasons for inconsistent results.
u450.book  Page 134  Wednesday, August 19, 2009  6:03 PM 
						

							Health and Safety Information       135
What is FDAs role concerning the safety of wireless 
phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they 
can be sold, as it does with new drugs or medical devices. 
However, the agency has authority to take action if wireless 
phones are shown to emit radio frequency energy (RF) at a level 
that is hazardous to the user. 
In such a case, FDA could require the manufacturers of wireless 
phones to notify users of the health hazard and to repair, replace 
or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory 
actions, FDA has urged the wireless phone industry to take a 
number of steps, including the following:
Support needed research into possible biological effects of RF of the 
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to 
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible 
information on possible effects of wireless phone use on human 
health.
FDA belongs to an interagency working group of the federal 
agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The 
following agencies belong to this working group:
National Institute for Occupational Safety and Health 
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency 
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with 
the Federal Communications Commission (FCC). All phones that 
are sold in the United States must comply with FCC safety 
guidelines that limit RF exposure. FCC relies on FDA and other 
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone 
networks rely upon. While these base stations operate at higher 
power than do the wireless phones themselves, the RF 
exposures that people get from these base stations are typically 
thousands of times lower than those they can get from wireless 
phones. 
Base stations are thus not the primary subject of the safety 
questions discussed in this document.
u450.book  Page 135  Wednesday, August 19, 2009  6:03 PM