Samsung Ht Ds100 Instruction Manual

							70
Virtual Headphone Function
Use headphones (not supplied) for private listening pleasure.
You can enjoy a dynamic sound effects similar to that of 5.1 channel
surround sound using conventional stereo headphones.
•You can purchase headphones 
from most Electronics stores.
12
•Each time the button is pressed, the
selection alternates between V-H/P
ONand V-H/P OFF.
Plug the
headphones into the
headphone jack.Press V-H/P
button.
•VIRTUAL HEADPHONE ON:Select to enjoy a 5.1-channel surround sound that
gives the feeling of being in a baseball park or
concert hall.
•VIRTUAL HEADPHONE OFF:Select to listen to a standard 2-channel stereo
sound.
SETUP
•Do not listen at extremely high volume levels when using headphones.
Extended, high-volume listening can lead to permanent hearing loss.Note
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 71
 
						

							71
Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the
automatic or manual tuning operation.
21
• The selection toggles back
and forth between FM each
time the TUNER button is
pressed.
Tune in to the
desired station.Press TUNER
button.
Automatic Tuning 2
Manual Tuning
21
Select a broadcast
station.
Press the STOP(   )
button to select
PRESET and then press
button to select the preset station.Automatic Tuning 1
Press the Function
button to select the
desired band (FM).
Press the STOP(   ) button
to select MANUAL and
then press and hold                   button to
automatically search the band.Automatic Tuning 2
Press STOP(   ) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.Manual Tuning
•Each time the button is pressed, the sound switches between STEREO and MONO.
•In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/STbutton to listen in Mono/Stereo. 
(This applies only when listening to an FM station.)
When                is pressed, a
preset broadcast station is
selected.
Press and hold                 to
automatically search for
active broadcasting stations.
Briefly press                 to
increase or decrease the
frequency incrementally.Automatic Tuning 1
Remote Control Unit
Main Unit
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 72
 
						

							72
Presetting Stations
To tune in to a preset station, press                on the 
remote control to select a channel.
•Refer to Step 2 on page 71 to
automatically or manually tune in
to a station.
21
•“PRGM” flashes in the
display. Tune in to a station.
3
Example: Presetting FM 89.1 in the memory 
Press             to
select 89.10. Press the TUNER
button and select
the FM band.
•Press the TUNER MEMORYbutton before
‘PRGM’ disappears from the display.
•‘PRGM’ disappears from the display and
the station is stored in memory.
54
•You can select between 1 and
15.
Press the TUNER
MEMORY button.
Press the TUNER
MEMORY button
again.
6
To preset another
station, repeat
steps 2 to 5.Press
to select preset
number.
RADIO OPERATION
You can store up to: 15 FM stations
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 73
 
						

							About RDS broadcasting
• RDS is not available for AM broadcasts.
• RDS may not operate correctly if the station tuned is not transmitting
RDS signal properly or if the signal strength is weak.
• If searching finishes at once,“PS”,and “RT” will not appear on the display.
Using the RDS (Radio Data System) to receive FM stations
What information can RDS signals provide?
RDS allows FM stations to send an additional signal along with their regular program signals. For
example,the stations send their station names,as well as information about what  type of program they
broadcast, such as sports or music,etc.
When tuned to an FM station which provides the RDS service,the RDS indicator
lights up on the display.
• Description on RDS function
1. PTY (Program Type) : Displays the type of programme currently being broadcast
2. PS NAME (Program Service Name) :
Indicates the name of broadcasting station
and is composed of 8 characters.
3. RT (Radio Text) :Decodes the text broadcast by a station (if any) and is composed
of maximum 64 characters.
4. CT (Clock Time) :Decodes the real time clock from the FM frequency.• Some stations may not transmit PTY, RT or CT information therefore this may not be
displayed in all cases.
5. TA (Traffic Announcement) :
When this symbol flashes it shows that the traffic
announcement is in progress.
Note
Note
You can see the RDS signals the station sends on the display.
TO show the RDS signals
Press RDS DISPLAY while listening to an FM station.
Each time you press the button, the display change to show you the following information:
PS (Program Service) :While searching,PSappears and then the station names will be
displayed.NO PS appears if no signal is sent.
RT(RadioText) : while searching,RTappears and then text messages the station sends
will be displayed. NO RTappears if no signal is sent.
Frequency : station frequency (non-RDS service)
About characters shown in the display
When the display shows PS,or RT signals,the following characters are used.
• The display window cannot differentiate upper case and lower case lrtters and always
uses upper case letters.
• The display window  cannot show accented letters, “A,” for instance, may stans for
accented “A’s” like “À, Â, Ä, Á, Åand Ã.”
73
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 74
 
						

							PTY (Program Type) indication and PTY-SEARCH function
74
To search for a program using the PTY codes
Before you start, remember...
• The PTY Search is only applicable to preset
stations.
• To stop searching any time during the process,
press PTY SEARCH while searching.
• There is a time limit in doing the following steps. 
If the setting is cancelled before you finish, start
from step 1 again.
• When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control. One  of the advantages of the RDS service is that you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
Press PTY SEARCH while listenning to an
FM station.
1
Press the PTY-or PTY+until the PTY code
you want appears on the display.
• The display gives you the PTY codes described
to the right.
2
Press PTY SEARCH again, while the PTY
code selected in the previous step is still on
the display.
• The center unit searches 15 preset FM
stations,stops when it finds the one you
have selected, and tunes in that station.
3
Display
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M.O.R.M
LIGHT M
CLASSIC
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENTProgram Type
• News including an announced opinion and
report
• Several matters including a current incident,
documentary, discussion and analysis.
•  Information including weights and measures,
returns and forecast, matters interesting the
customer, medical information, etc.
• Sports
• Education
• Drama-Radio serial, etc.
• Culture-National or local culture including the
religious problem, social science, language,
theater,etc.
• Natural science and technology
• Others-Speech, amusing program (quiz,
game), interview, comedy and satirical play,
etc.
• Pop music
• Rock music
• Current contemporary music considered to be
“easylistening.”
• Light classical music- Classical music and
instrumental and chorus music
• Heavy classical  music-Orchestra music,
symphony, chamber music and opera
• Other music - Jazz, R&B country music
• Weather
• Finance
• Children’s programmes
• Social affairs
• Religion
• Phone in
• Travel
• Leisure
• Jazz Music
• Country Music
• National Music
• Oldies Music
• Folk Music
• Documentary
RADIO OPERATION
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 75
 
						

							75
Convenient Functions
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
To confirm the sleep timer setting, press SLEEPbutton.
• SLEEP will be displayed. Each time the button is pressed
the preset time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝
90 ➝ 120 ➝ 150 ➝ OFF.
Press SLEEPbutton.
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
To cancel the sleep timer, press SLEEPbutton until
OFF appears on the display.
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 76
 
						

							76
MISCELLANEOUS
•Press the DIMMIERbutton to toggle between DIMMER AUTO
➝DIMMER ON ➝DIMMER OFFon the Display. 
DIMMER AUTO:Touch your hands to the operation buttons,
and it will turn on for about 5 seconds and
then turn off. 
DIMMER ON: Operation buttons are always turned on. 
DIMMER OFF: Operation buttons are always turned off. 
Adjusting Display Brightness
Touch your hands to the front of main unit to automatically turn
on the LED and Operation Buttons. 
Press DIMMERbutton.
•‘MUTE’ flash in the display.
•To switch the sound back on (at the same volume as
before), press MUTEagain or the VOLUMEbuttons.
Mute Function
This is useful when answering the door or a
telephone call.
Press MUTEbutton.
• In DIMMER AUTO mode, if you touch the LED buttons on the 
main unit once, firstly the LED brighten,and then touch again the 
function will work.Note
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 77
 
						

							77
Operating a TV with the Remote Control
•The remote control may not work on some brands of TVs. Also some operations may not be
possible depending on your brand of TV.
•If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
When operating a TV with the remote control
1
Press the MODEbutton to make the TV
indicator on the remote control flash.
2Press POWERbutton to turn on the TV.
3Point the remote control toward the TV.
4
While holding down POWER, enter the code
corresponding to your brand of TV.
•If the code matches the TVs code, the TV will be turned off.
•If there is more than one code listed for your TV in the table, 
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
•You can use the TV POWER, VOLUME, CHANNEL, and Numeric
buttons (0~9).
5
Pont the remote control toward the TV and press
POWER. If the TV turns off or on, the setting is
complete.
TVDVD RECEIVER
Note
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 78
 
						

							78
MISCELLANEOUS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29SAMSUNG
ANAM
DAEWOO
LG
HITACHI
JVC
SHARP
SONY
TOSHIBA
SANYO
MITSUBISHI
MATSUSHITA
TELEFUNKEN
RCA
PANASONIC
SABA
PHILIPS
GRUNDIG
ZENITH
MIVAL
NOBLEX
EMERSON
MAGNAVOX
LOEWE
THOMSON
NORDMENDE
LOEWE OPTA
BLAUPUNKT
SIEMENS
TV Brand Code List
No.BrandCode
00(Initial Value), 01, 02, 03, 04, 05, 73
06~11, 59
12~18, 20, 21
05, 20, 21, 22, 53
23, 40, 41, 49
24, 55
27, 33, 34, 35, 54
27, 36
27, 37, 42, 43, 44, 46
27, 30, 31, 32
05, 27, 28
09, 26
41, 49, 51, 57
29, 61
07, 09, 26, 48, 49, 50
40, 41, 47, 48, 49
05, 45, 47, 64, 65, 66, 67, 68, 69
39, 42, 46, 70, 71, 72
38
52
56
19
25
05, 60
40, 41, 49, 62, 63
40, 41, 49
36, 47, 05
39
39
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57BRANDT
FERGUSON
PIONEER
TELEAVA
FINLUX
FISHER
AKAI
YOKO
PHONOLA
RADIOLA
SCHNEIDER
NEWSAN
CONTINENTAL EDISON
SALORA
SELECO
NOKIA
REX
MIVAR
IMPERIAL
CGE
BANG & OLUFSEN
BRIONVEGA
FORMENTI
METZ
WEGA
RADIOMARELLI
SINGER
SINUDYNE
No.BrandCode
41
41
41, 48, 74
41
05, 42, 47
31
31
05
05, 45, 47
05, 45
05
58
49
48
48
48
48
46
46
46
47
47
47
47
47
47
47
47
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 79
 
						

							79
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
• Make sure that the rating level is correct.
• Are you using a deformed disc or a disc with scratches on
the surface?
• Wipe the disc clean.
Disc tray does not open.
Playback does not start.
Playback does not start
immediately when the
Play/Pause button is pressed.
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Sound is not produced.
Sound can be heard only
from a few speakers and
not all six.
• Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
• When listening to a CD or radio, sound is output to the front
speakers (L/R) only. Select PRO LOGIC II by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
• Make sure that the DVD disc is 5.1-CH compatible.
• If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
• Is there a Dolby Digital 5.1 CH mark on the disc? Dolby Digital
5.1 CH Surround Sound is produced only if the disc is recorded
with 5.1 channel sound.
• Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
Dolby Digital 5.1 CH
Surround Sound is not
produced.
SymptomCheck/Remedy
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 80