Samsung Ht Ds100 Instruction Manual

							CONNECTIONS
20
Converts the interlace signal to progressive to prevent flickering and to
remove distortion or noise on the edge of screen.
DCDi (Directional Correlational Deinterlacing)Function
Press and hold DCDibutton on the remote
control for over 3 seconds.
•Each time the button is pressed, the selection alternates between
DCDi ONand DCDi OFF.
 1p~44p(DS1000)-GB  9/16/04 9:14 AM  Page 23
 
						

							Connecting External Components
21
Example: Digital signal components such as a Settop Box or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not supplied)
Press AUXon the remote control to select ‘D.IN 1 or D.IN 2’.
•Each time the button is pressed, the selection changes as follows: D.IN 1➝D.IN 2➝AUX.
•You can also use the FUNCTIONbutton on the main unit.
The mode switches as follows: DVD/CD➝ D.IN 1➝D.IN 2➝ AUX➝ FM.
Connect the Digital In 1 or 2 (OPTICAL) on the main unit to the Digital Output on the
external digital component.1
2
Please observe the following cautions for your safety.
•Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
•Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.Cooling Fan
 1p~44p(DS1000)-GB  9/16/04 9:14 AM  Page 24
 
						

							•To listen TV sound in 5.1 channel sound through the main unit, connect the Audio In on the
main unit to the Audio Output on the TV.
•You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on
the VCR to this product.
LR
22
Example: Analog signal components such as a VCR or TV.
Connecting an External Analog Component
Audio Cable (not supplied)
If the external analog component has only one Audio
Out, connect either left or right.
CONNECTIONS
Note
Press AUXon the remote control to select AUX.
•Each time the button is pressed, the selection changes as follows: D.IN 1➝D.IN 2➝AUX.
•You can also use the FUNCTIONbutton on the main unit.
The mode switches as follows: DVD/CD➝ D.IN 1➝D.IN 2➝ AUX➝ FM.
Connect Audio In on the main unit to Audio Out on the external analog component.
•Be sure to match connector colors.
1
2
 1p~44p(DS1000)-GB  9/16/04 9:14 AM  Page 25
 
						

							23
1
2
Connecting the FM Antenna
FM antenna connection
Connect the FM antenna supplied to the FM 75ΩCOAXIAL terminal as a temporary
measure.
Slowly move the antenna wire around until you find a location where reception is
good, then fasten it to a wall or other rigid surface.
Press and hold NTSC/PALbutton on the remote controller for over 5 seconds while the power is turned off. 
•NTSC or PA L will appear in the display. 
At this time, press the NTSC/PALbutton shortly to select between NTSC and PA L.
•Each country has a different video format standard. 
•For normal playback, the video format of the disc must be the same as the video format of your TV. 
Selecting the Video Format
 1p~44p(DS1000)-GB  9/16/04 9:14 AM  Page 26
 
						

							24
CONNECTIONS23
Press the MODEbutton
so that the TV indicator
on the remote control
flashes.
TVDVD RECEIVER
TVDVD RECEIVER
Press the POWER
button to turn on
the TV.
56
Press the MODEbutton so
that the DVD RECEIVER
indicator on the remote
control flashes.Press DVDbutton
to select DVD/CD
mode.
1
Plug the power
cord into the AC
power supply.
4
Press TV/VIDEO
button to select
VIDEO mode.
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
•Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately.
•You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
•Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO and Numeric (0-9) buttons.
•By default, the remote control is set to work with Samsung TVs.
See page 77 for more information on the operation of the remote control.
Press MODEbutton.
To Operate the TV and DVD Player with a Single Remote Control
•If you move the product during playback, the disc may be damaged.
•If you push the disc window up or down by  hand, it may cause a breakdown.
•Do not let children insert their fingers into the unit.
Note
 1p~44p(DS1000)-GB  9/16/04 9:15 AM  Page 27
 
						

							2
1
Press OPEN/CLOSEbutton to open the
disc tray.
3
Press OPEN/CLOSEbutton to close the disc
window.
•The disc plays automatically when the disc window is closed.
•The disc menu may appear differently depending on the disc.
Insert the disc so that the printed side
faces up.
Disc Playback
•Depending on the content of the disc, the initial screen
may appear different.
•To resume playback, press PLAY/PAUSE(         )
button again.
To temporarily pause playback, 
press PLAY/PAUSEduring playback.
DVDVCDCD
•Playback starts automatically.
•If pressed once, “PRESS PLAY” is displayed and the
stop position will be stored in memory. If PLAY/PAUSE
(         ) button or ENTERbutton is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
•If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE(         ) button is pressed, playback
starts from the beginning.
To stop playback, 
press STOPduring playback.
Note
25
 1p~44p(DS1000)-GB  9/16/04 9:15 AM  Page 28
 
						

							•In this manual, the instructions marked with DVD (               ) are applicable
to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
•Depending on the content of the disc, the initial screen may appear different.
DVDNote
Groups and tracks (DVD-AUDIO)
•DVD-audios is divided into several large sections called groups and smaller
sections called tracks. Numbers are allotted to these sections. 
These numbers are called group numbers and track numbers.
GROUP 1 GROUP 2
TRACK 1 TRACK 2 TRACK 1 TRACK 2TRACK 3
Titles and chapters (DVD-VIDEO)
•DVD-videos is divided into several large sections called titles and smaller
sections called chapters. Numbers are allotted to these sections. 
These numbers are called title numbers and chapter numbers.
TITLE 1 TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2CHAPTER 3
Tracks (Video and music CDs)
•Video and music CDs are divided into sections called tracks. 
Numbers are allotted to these sections. These numbers are called track numbers.
TRACK 1 TRACK 2 TRACK 4 TRACK 5TRACK 3
Disc terminology
26
OPERATION
 1p~44p(DS1000)-GB  9/16/04 9:15 AM  Page 29
 
						

							•Depending on the recording mode, some MP3-CDs may not play.
•Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.Note
MP3-CD Playback
Data CDs (CD-R, CD-RW) encoded in MP3 format can be played.
2
In Stop mode, use     
to select
the album, and then
press the ENTER
button.
•The MP3 menu screen will appear and
playback will start.
•Depending on the MP3 disc, the
appearance of the menu may be different.
1
Press the
OPEN/CLOSEbutton
to open the disc tray,
and then load the
MP3 disc.
4
Press the STOP
button to stop
playback.
•To select another album and track,
repeat Steps 2 and 3 above.
3
To change the album,
use                 to
select another album
in Stop mode, and
then press the
ENTERbutton.
27
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girlDVD RECEIVER                                     SMART NAVI
 1p~44p(DS1000)-GB  9/16/04 9:15 AM  Page 30
 
						

							28
JPEG Disc Playback
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then
played back with this unit.
Press the OPEN/CLOSEbutton to open the disc windows, and
then load the JPEG disc.
• Playback will start automatically and each image will show for 5 seconds before moving to
the next image.
Rotate vertically Rotate 90° counterclockwise
Rotate horizontally  Rotate 90° clockwise
During playback, press                    .
To rotate the image
OPERATION
 1p~44p(DS1000)-GB  9/16/04 9:15 AM  Page 31
 
						

							Fast playback
DivX Playback
Skip Forward/Back
During playback, press the              button.
•Go to the next file whenever you press           button, if there are over 
2 files in the disk. 
•Go to the previous file whenever you press           button, if there are over 
2 files in the disk. 
Press and hold                button. 
•Each time the button is held down during playback, 
the playback speed changes as follows:
29
•DIVX file can be zoomed
only in ZOOM X2 mode. Note
Zoom Function
2
Press Cursor    ,    ,    
,    buttons to
move to the area
you want to enlarge.
1Press ZOOM
button.
•Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
 1p~44p(DS1000)-GB  9/16/04 9:15 AM  Page 32