Samsung Ht Ds100 Instruction Manual

							50
•This function works only if a DVD disc contains the rating level information.
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
4
•The password is set to 7890 by default.
•Once the setup is complete, you will be
taken to the previous screen.•If you have selected Level 6, you
cannot view DVDs with Level 7 or
higher.
•The higher the level, the closer the
content is to violent or adult material.
35
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTERbutton.Press Cursor      ,      button
to select the desired rating
level and then press
ENTERbutton.Enter the password
and then press
ENTERbutton.
Note
SETUP
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 51
 
						

							21Press MENUbutton.
Press Cursor
button to move to
‘Setup’ and then
press ENTERbutton.
51
Setting the Password
You can set the password for the Parental (rating level) setting.
•The password is set to 7890 by default.Note
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 52
 
						

							4
•Enter the old password, a new
password, and confirm new password.
•The setting is complete.
35
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
52
Press Cursor      button to
move to ‘PASSWORD’
and then press ENTER
button.
Press ENTER
button.Enter the password
and then press
ENTERbutton.
SETUP
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 53
 
						

							53
Setting the Wallpaper
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
DVDVCDJPEG
•“COPY LOGO DATA” will be
displayed on the TV screen.
•The selected wallpaper will be
displayed.•You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
21
43
During playback, press
PLAY/PAUSEbutton
when an image you
like appears.Press LOGO
button.
Press OPEN/
CLOSEto close
the disc tray.The power will turn off
and then back on and
the disc tray will open
automatically.
PAUSECOPY LOGO DATA
Setting the Wallpaper
Select this to set the
Samsung Logo image as
your wallpaper.Select this to set the desired
image as your wallpaper.
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 54
 
						

							54
SETUP
213
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Setup’ and then
press ENTERbutton.Press Cursor
button to move to
‘LOGO’ and then
press ENTERbutton.
To Change the Wallpaper
54
Press MENU
button to exit the
setup screen.Press      to select
the desired ‘USER’,
and then press
ENTER.
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 55
 
						

							21
Press the MENU
button while the
disc tray is open.Press Cursor
button to move to
‘Setup’ and then
press ENTERbutton.
55
DVD Playback Mode
•DVD Play mode is set to DVD Audio as factory default setting.
Note
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 56
 
						

							43
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
56
Press Cursor      button
to move to ‘DVD
TYPE’ and then press
ENTERbutton.Press Cursor     ,
button to move to
‘DVD VIDEO’ and then
press ENTERbutton.
SETUP
•Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode. 
When Selecting DVD Play Mode:
•DVD VIDEO: set to play the DVD video
contents contained in DVD
audio disc.
•DVD AUDIO: set to play the default DVD
audio.
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 57
 
						

							21
43
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTERbutton.
In the Speaker
Setup, press the
ENTERbutton again.Press Cursor     ,     , 
,    buttons to move
to the desired
speaker and then
press ENTERbutton.
•For C, LS, and RS, each time the button
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
•For L and R, the mode is set to SMALL.
57
SMALL: Select this when using the speakers.
NONE: Select this when no speakers are installed.
•Depending on PRO LOGIC and STEREO, the speaker mode may vary.
Note
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 58
 
						

							Setting the Test Tone
Use the Test Tone feature to check the speaker connections and to adjust the speaker levels.
L: Front Speaker (L) C: Center Speaker SW: Subwoofer 
R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R)
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
58
SETUP
21
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTERbutton.
3
Press Cursor      button
to move to ‘TEST
TONE’ and then press
ENTERbutton.
•The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order. 
If the ENTER button is pressed again
at this time, the test tone will stop.
To end the test tone, 
press TEST TONEbutton again.
Press TEST TONEbutton.
•Test tone will be produced as follows:
When playing a DVD or CD, this will work 
only in Stop mode.
•Use this function to check that each speaker is
correctly connected and that there is no problem.
Alternate method: press the TEST TONEbutton on the remote.
Multi-Channel Pro Logic Mode
Start
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 59
 
						

							Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
59
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
21
In Stop mode,
press MENU
button.Press Cursor     button
to move to ‘Audio’ and
then press ENTER
button.
•With           (Dolby Pro Logic II), the delay time may be different for each mode.
•With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
Note
 45P~84P(DS1000)-GB  9/16/04 9:16 AM  Page 60