Samsung HL-R4667W DLP TV User Manual

English - 71
Freezing the Picture
Press the STILL button to freeze a moving picture. (Normal sound will
still be heard.) 
Press again to cancel.
NOTE
•In the PIP mode, the main and sub pictures are stilled at the same
time.
BP68-00469A-00(054~073)  2/24/05  9:56 AM  Page 71 

Picture Control
English - 72
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the
noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue
Screen” mode to “Off”.
1
Press the MENU button.
Press the …or †button to
select “Setup”, then press 
the ENTER button.
2
Press the …or †button to
select “Blue Screen”, then
press the ENTER button.
3
Press the …or †button to
select “On” or “Off”, then...

Sound Control
BP68-00469A-00(054~073)  2/24/05  9:56 AM  Page 73 

Sound Control
English - 74
Sound Control
You can control and customize the sound levels and settings of the TV with the remote control.
Adjusting the Volume
Press the VOL+ or VOL– button to increase or decrease the volume.
Using the MUTE Button
At any time, you can temporarily
cut off the sound.
Press the MUTE button on the
remote control.
The message “Mute” is displayed
and the sound cuts off.
To turn mute off, press the MUTE
button again or press either the
VOL+ or VOL– button.
Customizing the Sound...

English - 75
3
Press the œor √button to select a
particular item to be changed.
Press the …or †button to increase or
decrease the selected frequency.
Press the EXIT button to exit.
Using Automatic Sound Settings
Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) that are preset
at the factory. You can select “Custom”, which automatically recalls your personalized sound settings.
1
Press the MENU button. 
Press the …or †button to select
“Sound”, then press the ENTER button....

Sound Control
English - 76
Setting the SRS TSXT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. Trusurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “SRS...

English - 77
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume
every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired
channel by lowering the sound output when the modulation signal is high or by raising the sound 
output when the modulation signal is low.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Auto Volume”,...

Sound Control
English - 78
Choosing a Multi-Channel Sound (MTS) track
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks 
(for example, simultaneous translations of the program into foreign languages).
The availability of these additional “multitracks” depends upon the program.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Multi-Track Options”,
then press the ENTER button.
3...

English - 79
Choosing a Multi-Channel Sound (MTS) track
Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Multi-Track Options”,
then press the ENTER button.
3Press the …or †button to
select “Multi-Track Sound”,
then press the ENTER button.
Press the …or †button to
select a setting you want,
then press the ENTER button.
Press the EXIT...

Sound Control
English - 80
Choosing a Digital Sound Format
Digital sound can be output from the rear-panel connector on your TV. The digital sound
output is an optical connector labeled “Optical Out”. After connecting an optical digital-audio
component, you must specify the transmission format (Dolby or PCM, as appropriate to your
digital audio component). See the owner’s manual of your Digital Audio component for further 
information.
1
Press the MENU button.
Press the …or †button to
select “Sound”,...