Samsung HL-R4667W DLP TV User Manual

English - 31
Selecting a Menu Language
1
Press the MENU button. 
Press the …or †button to
select “Setup”, then press the
ENTER button.
2
Press the ENTER button to
select “Language”.
Press the …or †button to
select “English”, “Español” 
or “Français”, then press the
ENTER button.
Press the EXIT button to exit.
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Setup
Language: English...

Operation
English - 32
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable 
channels. After the available channels are memorized, use the CH/PAGE  and CH/PAGE  buttons 
to scan through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels
(automatic) and adding and deleting channels (manual).
1...

English - 33
4
Press the …or †button to select the
Antenna connection, then press the
ENTER button.
When selecting Cable TV system:
Press the ENTER button to start the auto
program. By default, the cable TV system
is set to “STD”.
If you want to select another type of 
cable system, press the œbutton 
and use the …or †button to select
Analog or Digital “STD”, “HRC” or 
“IRC”. Press the ENTER button.
5
Press the √button to select “Start”, then
press the ENTER button to start the auto
program. The TV...

Operation
English - 34
Adding and Erasing Channels
You can add channels that were not memorized (or delete unwanted channels from memory).
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button. 
2
Press the …or †button to
select “Add/Delete”, then
press the ENTER button.
3
Repeatedly pressing the
ENTER button will alternate
between add channel and
delete channel.
Press the CH/PAGE  or
CH/PAGE button to 
switch to the appropriate
channel, then repeat above. 
Press...

English - 35
Changing Channels
Using the Channel Buttons
When you press the CH/PAGE  or CH/PAGE  button, the TV changes channels in sequence. 
You will see all the channels that the TV has memorized. 
(The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly switch to any channel.  
Using the “-” Button
The “-” button is used to select stations that broadcast both a digital and...

Operation
English - 36
Customizing Your Remote Control
Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal
remote control can also operate a VCR, Cable box, DVD, and Samsung Set-Top Box (even if your
VCR, Cable box and DVD are made by manufacturers other than Samsung). 
NOTE
•The remote control might not be compatible with all VCRs, DVD players and Cable boxes.
Setting Up Your Remote Control to Operate Your VCR (Cable box or
DVD player)
1
Turn off your...

English - 37
Remote Control Codes
VCR Codes
DVD Codes
Cable Box Codes
BP68-00469A-00(030~053)  2/24/05  10:15 AM  Page 37 

Operation
English - 38
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV. 
Also, you can check the time while watching the TV. (Just press the INFO button.)
1
Press the MENU button. 
Press the …or †button to
select “Setup”, then press 
the ENTER button.
2
Press the …or †button to
select “Time”, then press the
ENTER button.
Press the ENTER button to
select “Clock”.
3Press the ENTER button to
select “Clock Mode”.
Press the …or † button to
select “Manual”,...

English - 39
Option 2: Setting the Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
1
Press the MENU button. 
Press the …or †button to select “Setup”,
then press the ENTER button.
2
Press the …or †button to select “Time”,
then press the ENTER button.
Press the ENTER button to select “Clock”.
3
Press the ENTER button to select “Clock
Mode”.
Press the …or †button to select “Auto”,
then press the ENTER button.
4
Press the …or †button to select “Time
Zone”, then...

Operation
English - 40
Setting the On/Off Timer
1
Press the MENU button. 
Press the …or †button to
select “Setup”, then press
the ENTER button.
2Press the …or †button to
select “Time”, then press the
ENTER button.
Press the …or †button
to select “On Timer”, then
press the ENTER button.
Press the …or †button to
adjust “Hour”, then press
the √button to move to the
next step.
Set other items using the
same method as above. 
To activate On Timer with
the setting entered, set
Activation to “Yes” by 
pressing...