Home
>
Samsung
>
Communications System
>
Samsung Dcs System Administration And Special Features Guide
Samsung Dcs System Administration And Special Features Guide
Have a look at the manual Samsung Dcs System Administration And Special Features Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 14
20Open customer programming and follow the instructions below.
ACTIONDISPLAY
1. Press TRSF and then dial 105 [201] SPEED DIAL
Display shows00 :
2. Dial the station number (e.g., 205) OR[205] SPEED DIAL
press UP or DOWN to select the station0
0 :
and press the right soft key to move the
cursor OR press the left soft key to go
to step 4
3. If the selected station has no speed dial[205] SPEED DIAL
bins, this display will be shown and a newSPDBLK NOT EXIST
station may be selected
4. Dial the location number...](http://img.usermanuals.tech/thumb/66/85510/w64_samsung-dcs-system-admin_d-13.png "Page 14
20Open customer programming and follow the instructions below.
ACTIONDISPLAY
1. Press TRSF and then dial 105 [201] SPEED DIAL
Display shows00 :
2. Dial the station number (e.g., 205) OR[205] SPEED DIAL
press UP or DOWN to select the station0
0 :
and press the right soft key to move the
cursor OR press the left soft key to go
to step 4
3. If the selected station has no speed dial[205] SPEED DIAL
bins, this display will be shown and a newSPDBLK NOT EXIST
station may be selected
4. Dial the location number...")
![Page 15
5. Enter the name using the procedure in[205] SPEED NAME
Program Station Names
and press the01:SAM SMITH
right soft key to return to step 2 OR
press the left soft key to return to step 3
6. Press the F key to access
Program
Personal Speed Dial Numbers for
Other Stations
OR press TRSF to
store and exit programming OR press
SPK to store and advance to the
next program
2223
CREATE PROGRAMMED STATION
MESSAGESMessages 1–10 are programmed from the factory and cannot be changed. How-
ever, you can create ten...](http://img.usermanuals.tech/thumb/66/85510/w64_samsung-dcs-system-admin_d-14.png "Page 15
5. Enter the name using the procedure in[205] SPEED NAME
Program Station Names
and press the01:SAM SMITH
right soft key to return to step 2 OR
press the left soft key to return to step 3
6. Press the F key to access
Program
Personal Speed Dial Numbers for
Other Stations
OR press TRSF to
store and exit programming OR press
SPK to store and advance to the
next program
2223
CREATE PROGRAMMED STATION
MESSAGESMessages 1–10 are programmed from the factory and cannot be changed. How-
ever, you can create ten...")
![Page 16
24SET ALARM/APPOINTMENT
REMINDER WITH MESSAGEKeyset users can set their own alarms but standard telephone users cannot.
The system administrator can set alarm/appointment reminders for other sta-
tions in the system.
PROGRAM KEYS
UP & DOWN - Scroll through extensions.
HOLD - Press to clear data.
KEYPAD - Used to enter data.
Open customer programming and follow the instructions below.
ACTIONDISPLAY
1. Press TRSF and then dial 116 [20
1]ALM REM(1)
Display showsHHMM: NOTSET
2. Dial the station number...](http://img.usermanuals.tech/thumb/66/85510/w64_samsung-dcs-system-admin_d-15.png "Page 16
24SET ALARM/APPOINTMENT
REMINDER WITH MESSAGEKeyset users can set their own alarms but standard telephone users cannot.
The system administrator can set alarm/appointment reminders for other sta-
tions in the system.
PROGRAM KEYS
UP & DOWN - Scroll through extensions.
HOLD - Press to clear data.
KEYPAD - Used to enter data.
Open customer programming and follow the instructions below.
ACTIONDISPLAY
1. Press TRSF and then dial 116 [20
1]ALM REM(1)
Display showsHHMM: NOTSET
2. Dial the station number...")
![Page 19
30ADDING NAMES TO THE
TRANSLATION TABLEThis program allows the system administrator or technician to associate a CID
or ANI number received from the Central Office with a name programmed in this
translation table. If there is no match between a received number and a name in
this table, [no CID name] or [no ANI name] will be displayed.
The translation table consists of 250 (350 if the version is V4.x) entries which
each entry comprised of ten digit telephone number and a 16 digit name.
Names are written...](http://img.usermanuals.tech/thumb/66/85510/w64_samsung-dcs-system-admin_d-18.png "Page 19
30ADDING NAMES TO THE
TRANSLATION TABLEThis program allows the system administrator or technician to associate a CID
or ANI number received from the Central Office with a name programmed in this
translation table. If there is no match between a received number and a name in
this table, [no CID name] or [no ANI name] will be displayed.
The translation table consists of 250 (350 if the version is V4.x) entries which
each entry comprised of ten digit telephone number and a 16 digit name.
Names are written...")
ACTIONDISPLAY 1. Press TRSF 315 SET RELOCATION Display showsEXT _ EXT 2. Enter first station number (e.g., 202)SET RELOCATION Press RIGHT soft key to move cursorEXT 202 EXT _ 3. Enter second station number (e.g., 210)SET RELOCATION Press RIGHT soft key to enter dataEXT 202 EXT 210 4. Display will return to STEP 1 SET RELOCATION Go to STEP 2 EXT _ EXT OR press TRSF to store and exit programming. 34 NOTES
NOTES SYSTEM ACCESS CODES The SAMSUNG DCS telephone system has preset (default) feature access codes that use the following number plan. These codes can be used if a key is not available for the feature you want to use. Standard telephone users must always dial these codes.0 Call attendant or system operator 55 + 1 Page internal zone 1 10 + xxx Retrieve parked calls 55 + 2 Page internal zone 2 11 Put calls on and take calls off hold 55 + 3 Page internal zone 3 12 + xxx Retrieve calls on hold at another stn 55 + 4 Page internal zone 4 13 Door lock release 55 + 5 Page external zone 1 16 + xxx Make speed dial calls 55 + 6 Page external zone 2 17 Save number and redial it 55 + 7 Page external zone 3 18 Recall dial tone for new call 55 + 8 Page external zone 4 19 Last number redial 55 + 9 Page all external zones 2xx Extension numbers 55 + ✱All Page 3xx Extension numbers 56 Meet Me Answer 400 Cancel Do Not Disturb 57 Alarm sensor clear 401 Set Do Not Disturb 58 DISA alarm clear 41 Set Message No Ring 59 Walking class of service 42 + xxx Cancel message 600Cancel all call forwarding 43 Set/return messages 601 + xxxSet Forward All Calls 44 Busy station/line callback602 + xxx Set Forward Busy 45 Busy station camp-on 603 + xxx Set Forward No Ans 46 Set up a conference 604 + xxxSet Fwd Busy/No Ans 47 Enter account code 605 + xxx Set Fwd Follow Me 48 Set programmed station message607 + xxx Set Fwd DND 49 Send flash to outside line 65 Directed call pickup 500 Station hunt groups 66 Group call pickup to 67 Universal Answer 529 Station hunt groups 681 Dial by Voice 53 + grp + 0 Out of group 682 Dial by Voice Record 53 + grp + 1 In group 7xx Individual line numbers 54 + zoneMeet Me Page 8x Trunk groups 55 + 0 Page all internal zones 9 Trunk group 9 (Local)