Samsung Dcs Compact System Falcon Keyset User Guide

35
While the caller is leaving a message or ringing you may:
• Press [#] to immediately put the caller in your voice mailbox and moni-
tor it.
• Press [✱] to immediately disconnect your station. The caller continues to
leave a message normally.
• Press ANS/RLSto answer the call (using the handset or speaker).
NOTE: If you do not want to hear your personal greeting during this process
you can select AME BGM in your keyset MMC 110. This will play back-
ground music at your keyset instead of your personal...

37
REJOINING A PAGEThis feature allows you to hear the remaining portion of an ongoing internal
page after you return your keyset to idle. To enable this feature:
• With the handset on-hook, press TRANSFERand then dial 110.
• Dial 71to turn this feature on or 70to turn it off.
• Press TRANSFERto store your selection.RING PREFERENCEThis feature automatically answers ringing calls when you lift the handset or
press the ANS/RLSkey. This method will always answer calls in the order
they arrived at your...

DIAL BY DIRECTORYEach station or speed dial number can have an associated directory name.
A station or speed dial number can be selected by scrolling alphabetically
through a directory name list. This on-line “phone book” allows the user to
look up and dial any station or speed dial number in seconds. 
• Press the DIRkey (DIRECTORY).
• Select the directory you wish to use: PERS(personal speed dial num-
bers), SYS(system speed dial numbers) or STN(station names).
• Dial the key on the keypad that...

COUNT  1 2 3 4 5
DIAL 0  < >  .  ) 0 
DIAL 1  space  ?  ,  ! 1
DIAL 2  A  B  C  @ 2
DIAL 3  D  E  F  # 3
DIAL 4  G  H  I  $ 4
DIAL 5  J  K  L  % 5 
DIAL 6  M  N  O  ^ 6
DIAL 7  P  Q  R  S 7 
DIAL 8  T  U  V ✱8
DIAL 9  W  X  Y  Z 9
DIAL ✱: = [  ]✱
NOTES:
1. When the character you want appears on the same dial pad key as the
previous character, press UP to move the cursor one space to the right.
2. Other symbols are available for DIAL #.
To cancel an individual alarm and reminder message:
• Press...

WHAT IS CALLER ID?Caller ID is the name given to the telephone company-provided feature that
delivers the telephone number and sometimes the name of the person call-
ing your phone. There are two types of Caller ID; the first delivers the calling
party’s telephone number only and the second (sometimes referred to as
“Deluxe” Caller ID) delivers both the calling party’s telephone number and
name as listed in the telephone directory. 
The phone system can handle both types of Caller ID; in fact, in the...

• Press the STOREkey. The system displays the speed dial bin in which
the number was stored OR
• Press the CIDkey and then press the SCROLLkey.
• Press the STOREsoft key.
• The system displays the speed dial bin in which the number was stored.
NOTE: Your telephone system must have LCR correctly programmed to re-
dial the saved number. If LCR is not being used on your system, you will not
be allowed to STORE CID numbers.INQUIRE CID PARK/HOLD INFOIf you are informed that an incoming call is on hold or has...

47
SVMi-4
This section describes how to setup your mailbox, and how to use the vari-
ous mailbox owner features. Please review this section carefully before you
use your mailbox.
Your voice mail box has the capability of storing private messages offers a
number of options for sending or redirecting messages and provides sever-
al ways to notify you of new messages or calls.
This section can be used by mailbox owners from within the office or from
telephones outside the office. The basic operation is the...

At this point the inside and outside callers follow the same instructions. You
will hear a message stating the number of messages left in your mailbox.
You will then hear the Mailbox Owner Main Menu with the following options:
1 Listen to New Messages - See Listening to your Message.
2 Record and Send Message - See Sending Messages.
3 Review Saved Messages - See Listening to your Message.
5 Personal Greetings - See Personal Greetings.
6 Mailbox Administration - See Mailbox Administration. 
# Personal...

PERSONAL GREETINGSTo set personal mailbox greeting press [5] from the Main Menu.
Your personal greeting will be played every time someone reaches your
mailbox. A typical text for a personal greeting message is:
Hi, this is ........ sorry I cant take your call right now. Please leave your name
and number and I will get back to you as soon as I can.
Follow the instructions to record your greeting message. When you are
done After recording your message, you will be able to listen to the mes-
sage you...

ShortcutsCallingCalling a station that is busy or does not answer you can press [#] to imme-
diately send the call to the called parties mailbox.
Being CalledIf your phone rings and you want to send the caller directly to your mailbox,
simply press [#].Direct Messaging[#] + DSS  To make it easy to leave messages for others in your office with-
out having to dial their extension number first, keyset users may simply dial
[#] plus a mailbox (extension) number and leave a message directly. If you
dial a...