Samsung Convoy 4 User Guide

							4 Side View 
Side View
 
Shortcut/PTT key Headset jack 
Volume key  Speakerphone 
USB charger/ 
Memory 
Accessory port 
card  slot  
Getting Started  
						

							5 Side View 
 
 
 
  
 
Here are some key features on the sides of your device. 
• Headset jack: Plug in an optional 3.5 mm headset 
(not included) for safe, convenient conversations. 
• Speakerphone: When the phone is closed, press 
and hold to turn Driving Mode on or o�. When the 
phone is open, press to turn Speakerphone on 
or o�. 
• USB charger/Accessory port: Connect the USB 
charger (included) and other optional accessories 
(not included) . 
• Memory card slot: Install an optional memory card 
(not included) for storage of �les. 
• Volume key: Press to adjust master volume or voice 
volume during a call. Press to mute an incoming 
call ringtone. Press and hold down to activate 
Sound O� mode or press and hold up to return to 
the Master Volume level. When using the external 
menu, press to navigate lists. With the phone 
closed, press down four times to initiate the Fake 
Call feature. 
• Shortcut/PTT key: Press and hold to launch a 
shortcut menu. When PTT+ is activated, press to 
initiate PTT.  
Getting Started  
						

							6 Open View 
Open View
 
Earpiece 
Directional keys 
Center select key 
Left soft key  Right soft key 
Voice commands/Flashlight 
Camera/Camcorder 
Send  End/Power 
Clear 
Voicemail 
Vibration mode  
Getting Started  
						

							7 Open View 
 
 
 
 
  
 
 
 
 
 
 
Here are some key features found on the opened phone. 
• Center select key: Press to select the highlighted 
item. 
• Right soft key: Press to select the lower right menu 
item on the display. 
• Voice commands/Flashlight: With the �ip open, 
press to launch Voice Commands, or press and 
hold to turn the Flashlight on or o�. 
• End/Power: Press to end a call. Press and hold 
to turn the phone On or O�. Press to send an 
incoming call to voicemail. 
• Clear: Press to delete a character or to go back. 
Press and hold to delete the previous word. When 
navigating menus and pages, press to go back to 
the previous screen. 
• Vibration mode: With the �ip open, press and hold 
to switch between Vibrate Mode and Master Volume 
level. 
• Voicemail: Press and hold to dial voicemail. 
• Send: Press to dial a call. From the Home screen, 
press to view Recent Calls. 
• Camera/Camcorder: Press to launch the camera, 
or press and hold to launch the camcorder. 
• Left soft key: Press to select the lower left menu 
item on the display. 
• Directional keys: Press to scroll phone menus. 
• Earpiece: Hear call sounds, including the caller.  
Getting Started  
						

							8 Assemble Your Device 
  
Assemble Your Device 
This section helps you to assemble 
your device. 
Remove the Back Cover 
Warning: Do not bend or twist the back cover 
excessively. Doing so may damage the cover. 
1. Insert the battery cover removal tool into the slot 
on the back cover and turn it counter clockwise to 
open the battery cover. 
Included 
2.  Insert the tool in the groove at the top of the cover 
to lift the cover up and remove.  
Getting Started  
						

							9 Assemble Your Device 
    
 
Install the Battery 
1. Insert the battery into the opening on the back of 
the phone, making sure the connectors align. 
2. Gently press down to secure the battery. 
Install the SIM Card 
When you subscribe to a cellular network, you are 
provided with a plug-in SIM card. During activation, 
your SIM card is loaded with your subscription details, 
such as your Personal Identi�cation Number (PIN) , 
available optional services, and other features.  Warning: Please be careful when handling the SIM card 
to avoid damaging it. Keep all SIM cards out of reach of 
small children. 
► 
Carefully slide the SIM card into the SIM card slot. 
• Make sure that the card’s gold contacts face 
into the device and that the angled corner of the 
card is positioned as shown. 
Caution: If the SIM card is not inserted correctly, the 
device cannot detect it. Reorient the SIM card and place 
it back into the slot if it is not detected.  
Getting Started  
						

							10 Assemble Your Device 
  
Replace the Back Cover 
1.  Place the cover over the back of the phone, then 
press down along the edges to secure the cover. 
Included 
2. Use the battery cover removal tool to turn the dial 
clockwise until the cover is locked. 
Note : When placing the cover back on the phone, press 
down �rmly along the edges to ensure that the cover 
is �ush with the phone. This ensures that the battery 
compartment is pressurized. 
Charge the Battery 
Your device is powered by a rechargeable, standard 
Li-Ion battery. A USB Charger (charging head and 
USB cable) is included with the device for charging 
the battery from any standard outlet. 
The battery comes partially charged. A fully 
discharged battery requires up to four hours of charge 
time. You can use the device while charging. 
Note : It is recommended you fully charge the battery 
before using your device for the �rst time. 
Caution: Use only charging devices and batteries 
approved by Samsung
™. Samsung accessories 
are designed to maximize battery life. Using other 
accessories may invalidate your warranty and may 
cause damage.  
Getting Started  
						

							11 Assemble Your Device 
    
U
SB C able 
Char
ging He ad 
1. Open the side slot and insert the USB cable into 	
the port.	 3
. When charging is complete, unplug the charging 
head from the outlet and remove the USB cable 
from the device. 
2.  Connect the USB cable to the charging head, and 
then plug the charging head into a standard outlet.	

 
Caution: Failure to unplug the wall charger before you 
remove the battery can cause damage to the device.  
Getting Started  
						

							12 Assemble Your Device 
   
    
When to Charge the Battery 
When the battery is low and only a few minutes of 
operation remain, the battery icon  blinks and the 
device sounds a warning tone at regular intervals.  ( ) 
In t

his condition, your device conserves its remaining 
battery power by dimming the screen. 
When the battery level becomes too low, the device 
automatically turns o�. 
For a quick check of your battery level, 
►  View the battery charge indicator located in the 
Status bar of the display. Four bars  indicates 
a full charge. 
( 
)  
Getting Started  
						

							13 Set Up Your Device 
  
 
 
   
 
 
 
 
Set Up Your Device 
Turn the Phone On or O� 
1. 
Open the phone. 
2.  Press and hold   End/Power until the phone 
power-on screen displays. 
Note : Do no

t turn on the phone when mobile phone use 
is prohibited. 
3.	  If the phone requests a password, enter it and 
press   OK or the   Center key. For more 
information, see 
“Securit y” on page 132 . 
The Home screen displays while the phone 
searches for your network. After the phone �nds 
your network and displays adequate signal strength 
bars, you can make or receive calls. 
Note : The display language is preset to Automatic 
at the factory. To change the language, use the 
Language menu. For more information, see 
“Language” on page 131
. 
4.	  W

hen you want to switch o� the phone, press 
and hold   End/Power until the power-o� image 
displays. 
Initial Setup 
The �rst time you turn on your phone, Set-up Wizard 
prompts you to con�gure basic preferences so you 
can quickly get started using your phone. 
You can also access Set-up Wizard at any time in 
Settings. 
1.  From the Home screen, press   Menu > 
 
 Settings  > Set-up Wizard. 
2. Use  Preview,   Skip, and   Next  or Set  to  
follow the prompts and set preferences: 
• Font style: Choose a font style for the dial, 
menus, and messaging. 
• Font size: Choose a font size for the dial, menus, 
and messaging. 
• Volume key control: When enabled, you can 
adjust the display’s font size by pressing the 
Volume Key.  
Getting Started