Samsung CLX 3160FN User Manual

							
Scanning
26
6Scanning
Scanning with your machine lets you turn pictures and text into 
digital files on your computer. Then you can fax or e-mail the 
files, display them on your web site or use them to create 
projects that you can print using Samsung SmarThru software 
or the WIA driver.
This chapter includes:
• Scanning Using Samsung SmarThru
• Scanning Process with TWAIN-enabled Software
• Scanning Using the WIA Driver
NOTES: 
• Check the Operating System(s) that are compatible with your printer. Please refer to the OS Compatibility 
section of Printer Specificatio ns in your Printer User’s 
Guide.
• You can check your printer name in the supplied CD- ROM.
• The maximum resolution that can be achieved  depends upon various factors, including computer 
speed, available disk space, memory, the size of the 
image being scanned, and bit depth settings. Thus, 
depending on your system and what you are scanning, 
you may not be able to scan at certain resolutions, 
especially using enhanced dpi.
Scanning Using Samsung 
SmarThru
Samsung SmarThru is the accompanying software for your 
machine. With SmarThru, scanning is the proverbial piece of 
cake.
NOTE: You can use SmarThru 4 in Windows 98 or higher.
Uninstalling Samsung SmarThru
NOTE: Before beginning uninstallation, ensure that all 
applications are closed on your computer. 
1From the Start menu, select Programs.
2Select SmarThru 4, and then select Uninstall SmarThru 
4
.
3When your computer asks you to confirm, click OK. 
4Click Finish.
You may be prompted to restart your computer. In this 
case you must shut the computer down and then restart it 
before the changes will be saved.
Downloaded From ManualsPrinter.com Manuals 
						

							
Scanning
27
Using Samsung SmarThru
Follow these steps to start scanning using the SmarThru:
1Make sure that your machine and computer are turned on 
and properly connected to each other. 
2Place your photograph or page on the document glass 
or ADF.
3Once you have installed Samsung SmarThru, you will see 
the 
SmarThru 4 icon on your desktop. Double-click the 
SmarThru 4 icon.
The SmarThru 4 window opens.
•Scan To
Allows you to scan an image and save it to an application 
or folder, email it, or publish it on a web site. 
•Image
Allows you to edit an image you have saved as a graphic 
file and send it to a selected application or folder, email it, 
or publish it on a web site. 
•Copy
Allows you to produce professional quality copies. You can 
make black and white or color copies of an image if your 
machine supports it, and customize the copy settings. 
•Print
Allows you to print images you have saved. You can print 
images in black and white or color mode if your machine 
supports it.
•Fax
Allows you to fax images or files you have saved on your 
computer. This is available when your machine supports 
the fax feature. 
Double-click this icon.
Make sure that your 
printer is selected.
4Click Scan To. The Scan To menu bar appears on the 
SmarThru 4 window.
Scan To lets you use the following services:
•Application
Scanning an image and placing it in an image editor 
application, such as Paint or Adobe Photoshop. 
•E-mail
Scanning an image and emailing it. Allows you to scan an 
image, preview it, and email it. 
NOTE: To send an image by e-mail, you must have a mail 
client program, like Outlook Express, which has been set up 
with your e-mail account.
•Folder
Scanning an image and saving it to a folder. Allows you to 
scan an image, preview it, and save it to the folder of your 
choice.
•OCR
Scanning an image and performing text recognition. 
Allows you to scan an image, preview it, and send it to the 
OCR program for text recognition. 
- Recommended Scan Option for OCR
- Resolution: 200 or 300 dpi
- Image Type: Grayscale or Black & White
•Web
Scanning an image, previewing it, and publishing it on a 
web site, using the specified file format for the image you 
want to publish.
Adjust the 
scan settings.
Scan To 
menu bar
Click to start 
scanning.
Downloaded From ManualsPrinter.com Manuals 
						

							
Scanning
28
•Settings
Customizing settings of Scan To basic functions. Allows 
you to customize settings for 
Application, E-mail, OCR, 
and 
Web functions.
5Click the service icon according to your job.
6SmarThru 4 opens for the selected service. Adjust the 
scan settings. 
7To start scanning, click Scan. 
NOTE: If you want to cancel the scan job, click Cancel.
Using Onscreen Help File
For more information about SmarThru, click   at the top right 
corner of the window. The SmarThru Help window opens and 
allows you to view onscreen help supplied on the SmarThru 
program.
Scanning Process with TWAIN-
enabled Software 
If you want to scan documents using other software, you will 
need to use TWAIN-complian t software, such as Adobe 
PhotoDeluxe or Adobe Photoshop. The first time you scan with 
your machine, select it as your TWAIN source in the application 
you use. 
The basic scanning process involves a number of steps:
1Make sure that your machine and computer are turned on 
and properly connected to each other.
2Load the document(s) face up into the ADF.
OR
Place a single document face down on the document 
glass.
3Open an application, such as PhotoDeluxe or Photoshop. 
4Open the TWAIN window and set the scan options.
5Scan and save your scanned image.
NOTE: You need to follow the program’s instructions for 
acquiring an image. Please refer to the user’s guide of the 
application.
Scanning Using the WIA Driver
Your machine also supports the Windows Image Acquisition 
(WIA) driver for scanning images. WIA is one of the standard 
components provided by Microsoft
 Windows XP and works 
with digital cameras and scanners. Unlike the TWAIN driver, 
the WIA driver allows you to scan and easily manipulate images 
without using additional software.
NOTE: The WIA driver works only on Windows XP with USB 
port. 
1Load the document(s) face up into the ADF.
OR
Place a single document face down on the document 
glass.
2From the Start menu on your desktop window, select 
Settings, Control Panel, and then Scanners and 
Cameras
.
3Double click your scanner driver icon. The Scanner and 
Camera Wizard launches.
4Choose your scanning preferences and click Preview to 
see how your preferences affect the picture.
5Click Next.
6Enter a picture name, and select a file format and 
destination to save the picture.
7Follow the on-screen instructions to edit the picture after it 
is copied to your computer.
NOTE: If you want to  cancel the scan job, press the Cancel 
button on the Scanner and Camera Wizard.
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer in Linux
29
7Using Your Printer in 
Linux 
You can use your machine in a Linux environment. 
This chapter includes:
• Getting Started
• Installing the Unified Linux Driver
• Using the Unified Driver Configurator
• Configuring Printer Properties
• Printing a Document
• Scanning a Document
Getting Started
The supplied CD-ROM provides you with Samsung’s Unified 
Linux Driver package for using your machine with a Linux 
computer.
Samsung’s Unified Linux Driver package contains printer and 
scanner drivers, providing the ability to print documents and 
scan images. The package also delivers powerful applications 
for configuring your machine and further processing of the 
scanned documents.
After the driver is installed on your Linux system, the driver 
package allows you to monitor a number of machine devices via 
fast ECP parallel ports and USB simultaneously. 
The acquired documents can then be edited, printed on the 
same local or network machine devices, sent by e-mail, 
uploaded to an FTP site, or transferred to an external OCR 
system.
The Unified Linux Driver package is supplied with a smart and 
flexible installation program. You dont need to search for 
additional components that might be necessary for the Unified 
Linux Driver software: all required packages will be carried onto 
your system and installed automatically; this is possible on a 
wide set of the most popular Linux clones.
Installing the Unified Linux 
Driver
Installing the Unified Linux Driver
1Make sure that you connect your machine to your 
computer. Turn both the computer and the machine on.
2When the Administrator Login window appears, type in 
root in the Login field and enter the system password.
NOTE: You must log in as a super user (root) to install the 
printer software. If you are not a super user, ask your system 
administrator.
3Insert the printer software CD-ROM. The CD-ROM will 
automatically run.
If the CD-ROM does not automatically run, click the   
icon at the bottom of the desktop. When the Terminal 
screen appears, type in:
If the CD-ROM is secondary master and the location to 
mount is /mnt/cdrom,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./install.sh 
NOTE: The installation program runs automatically if you 
have an autorun software package installed and configured.
4When the welcome screen appears, click Next.
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer in Linux
30
5When the installation is complete, click Finish.
The installation program has added the Unified Driver 
Configurator desktop icon and Samsung Unified Driver 
group to the system menu for your convenience. If you 
have any difficulties, consult the onscreen help that is 
available through your system menu or can otherwise be 
called from the driver package windows applications, 
such as 
Unified Driver Configurator or Image 
Manager
.
Uninstalling the Unified Linux Driver
1When the Administrator Login window appears, type in 
root in the Login field and enter the system password.
NOTE: You must log in as a super user (root) to install the 
printer software. If you are not a super user, ask your system 
administrator.
2Insert the printer software CD-ROM. The CD-ROM will 
automatically run.
If the CD-ROM does not automatically run, click the   
icon at the bottom of the desktop. When the Terminal 
screen appears, type in:
If the CD-ROM is secondary master and the location to 
mount is /mnt/cdrom,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./uninstall.sh 
NOTE: The installation program runs automatically if you 
have an autorun software package installed and configured.
3Click Uninstall.
4Click Next. 
5Click Finish.
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer in Linux
31
Using the Unified Driver 
Configurator
Unified Linux Driver Configurator is a tool primarily intended for 
configuring Printer or MFP devices. Since an MFP device 
combines the printer and scanner, the Unified Linux Driver 
Configurator provides options logically grouped for printer and 
scanner functions. There is also a special MFP port option 
responsible for the regulation of access to an MFP printer and 
scanner via a single I/O channel.
After installing the Unified Linux driver, the Unified Linux Driver 
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver 
Configurator
1Double-click Unified Driver Configurator on the 
desktop.
You can also click the Startup Menu icon and select 
Samsung Unified Driver and then Unified Driver 
Configurator
.
2Press each button on the Modu les pane to switch to the 
corresponding configuration window.   
You can use the onscreen help by clicking 
Help.
3After changing the configurations, click Exit to close the 
Unified Driver Configurator.
Printers Configuration button
Scanners Configuration button Ports Configuration button
Printers Configuration
Printers configuration has the two tabs: Printers and Classes. 
Printers Tab
You can see the current system’s printer configuration by 
clicking on the printer icon button on the left side of the Unified 
Driver Configurator window.
You can use the following printer control buttons:
•Refresh: renews the available printers list.
•
Add Printer: allows you to add a new printer.
•
Remove Printer: removes the selected printer.
•
Set as Default: sets the current printer as a default 
printer.
•
Stop/Start: stops/starts the printer.
•
Test: allows you to print a test page to check if the 
machine is working properly.
•
Properties: allows you to view and change the printer 
properties. For details, see page 33.
Shows all of the 
installed printer.
Switches to Printer 
configuration.
Shows the status, 
model name and 
URI of your printer.
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer in Linux
32
Classes Tab
The Classes tab shows a list of available printer classes.
•Refresh : Renews the classes list.
•
Add Class... : Allows you to add a new printer class.
•
Remove Class : Removes the selected printer class.
Scanners Configuration
In this window, you can monitor the activity of scanner devices, 
view a list of installed Samsung MFP devices, change device 
properties, and scan images.
•Properties... : Allows you to change the scan properties 
and scan a document. See page 34.
•
Drivers... : Allows you to monitor the activity of the scan drivers.
Shows the status of the 
class and the number of 
printers in the class.
Shows all of the 
printer classes.
Switches to 
Scanners 
configuration.
Shows all of the 
installed scanners.
Shows the vendor, 
model name and type 
of your scanner. 
Ports Configuration
In this window, you can view the list of available ports, check 
the status of each port and releas e a port that is stalled in busy 
state when its owner is terminated for any reason.
•Refresh : Renews the available ports list.
•
Release port : Releases the selected port.
Sharing Ports Between Printers and Scanners 
Your machine may be connected  to a host computer via the 
parallel port or USB port. Since the MFP device contains more 
than one device (printer and scanner), it is necessary to 
organize proper access of “consumer” applications to these 
devices via the single I/O port.
The Samsung Unified Linux Driver package provides an 
appropriate port sharing mechan ism that is used by Samsung 
printer and scanner drivers. The drivers address their devices 
via so-called MFP ports. The current status of any MFP port can 
be viewed via the Ports Configuration. The port sharing 
prevents you from accessing one functional block of the MFP 
device, while another block is in use.
When you install a new MFP device onto your system, it is 
strongly recommended you do this with the assistance of an 
Unified Driver Configurator. In this case you will be asked to 
choose I/O port for the new device. This choice will provide the 
most suitable configuration for MFP’s functionality. For MFP 
scanners I/O ports are being chosen by scanner drivers 
automatically, so proper settings are applied by default.
Switches to 
ports 
configuration.
Shows the port type, 
device connected to 
the port and status
Shows all of the 
available ports.
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer in Linux
33
Configuring Printer Properties
Using the properties window provided by the Printers 
configuration, you can change the various properties for your 
machine as a printer.
1Open the Unified Driver Configurator.If necessary, switch to Printers configuration.
2Select your machine on the available printers list and click 
Properties.
3The Printer Properties window opens.
The following five tabs display at the top of the window:
•
General: allows you to change the printer name, location 
and description. The name entered in this tab displays on 
the printer list in Printers configuration.
•
Connection: allows you to view or select another port. If 
you change the printer port from USB to parallel or vice 
versa while in use, you must re-configure the printer port 
in this tab.
•
Driver: allows you to view or select another printer 
driver. By clicking 
Options, you can set the default 
device options.
•
Jobs: shows the list of print jobs. Click Cancel job to 
cancel the selected job and select the 
Show completed 
jobs
 check box to see previous jobs on the job list.
•
Classes: shows the class that your printer is in. Click 
Add to Class to add your printer to a specific class or 
click 
Remove from Class to remove the printer from the 
selected class.
4Click OK to apply the changes and close the Printer 
Properties Window.
Printing a Document
Printing from Applications
There are a lot of Linux applicat ions that you are allowed to 
print from using Common UNIX Printing System (CUPS). You 
can print on your machine from any such application.
1From the application you are using, select Print from the 
File menu.
2Select Print directly using lpr.
3In the LPR GUI window, select the model name of your 
machine from the Printer list and click 
Properties.
4Change the printer and print job properties.
Click.
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer in Linux
34
The following four tabs display at the top of the window.
•
General - allows you to change the paper size, the paper 
type, and the orientation of the documents, enables the 
duplex feature, adds start and end banners, and changes 
the number of pages per sheet.
•
Text - allows you to specify the page margins and set the 
text options, such as spacing or columns.
•
Graphics - allows you to set image options that are used 
when printing images/files, such as color options, image 
size, or image position.
•
Device: allows you to set the print resolution, paper 
source, and destination.
5Click Apply to apply the changes and close the Properties 
window. 
6Click OK in the LPR GUI window to start printing.
7The Printing window appears, allowing you to monitor the 
status of your print job.
To abort the current job, click 
Cancel.
Printing Files
You can print many different types of files on the Samsung 
machine device using the standard CUPS way - directly from 
the command line interface. The CUPS lpr utility allows you do 
that. But the drivers package replaces the standard lpr tool by 
a much more user-friendly LPR GUI program.
To print any document file:
1Ty p e  lpr  from the Linux shell command 
line and press 
Enter. The LPR GUI window appears.
When you type only 
lpr and press Enter, the Select 
file(s) to print window appears first. Just select any files 
you want to print and click 
Open. 
2In the LPR GUI window, select your printer from the list, 
and change the printer and print job properties.
For details about the properties window, see page 33.
3Click OK to start printing.
Scanning a Document
You can scan a document using the Unified Driver Configurator 
window.
1Double-click the Unified Driver Configurator on your 
desktop.
2Click the   button to switch to Scanners Configuration.
3Select the scanner on the list. 
When you have only one MFP device and it is connected 
to the computer and turned on, your scanner appears on 
the list and is automatically selected.
If you have two or more scanners attached to your 
computer, you can select any scanner to work at any 
time. For example, while acquisition is in progress on the 
first scanner, you may select the second scanner, set the 
device options and start the image acquisition 
simultaneously.
4Click Properties.
5Load the document to be scanned face up into the ADF 
(Automatic Document Feeder) or face down on the 
document glass.
6Click Preview in the Scanner Properties window.
Click your 
scanner.
Downloaded From ManualsPrinter.com Manuals 
						

							
Using Your Printer in Linux
35
The document is scanned and the image preview appears 
in the Preview Pane.
7Change the scan options in the Image Quality and Scan 
Area sections.
•
Image Quality: allows you to select the color 
composition and the scan resolution for the image.
•
Scan Area: allows you to select the page size. The 
Advanced button enables you to set the page size 
manually.
If you want to use one of the preset scan option settings, 
select from the Job Type drop-down list. For details about 
the preset Job Type settings, see page 35.
You can restore the default setting for the scan options 
by clicking 
Default.
8When you have finished, click Scan to start scanning.
The status bar appears on the bottom left of the window 
to show you the progress of the scan. To cancel scanning, 
click 
Cancel.
9The scanned image appears in the new Image Manager 
tab.
If you want to edit the scanned image, use the toolbar. 
For further details about editing an image, see page 35.
Drag the pointer to 
set the image area 
to be scanned.
10When you are finished, click Save on the toolbar.
11Select the file directory where you want to save the image 
and enter the file name. 
12Click Save.
Adding Job Type Settings
You can save your scan option se ttings to retrieve for a later 
scanning.
To save a new Job Type setting:
1Change the options from the Scanner Properties window.
2Click Save As.
3Enter the name for your setting.
4Click OK. 
Your setting is added to the Saved Settings drop-down 
list.
To save a Job Type setting for the next scan job:
1Select the setting you want to use from the Job Type drop-
down list.
2The next time you open the Scanner Properties window, 
the saved setting is automatically selected for the scan 
job.
To delete a Job Type setting:
1Select the setting you want to delete from the Job Type 
drop-down list.
2Click Delete.
The setting is deleted from the list
Using the Image Manager
The Image Manager application provides you with menu 
commands and tools to edit your scanned image.
Use these tools to 
edit the image.
Downloaded From ManualsPrinter.com Manuals