Samsung CLP 660ND User Manual

							
8.1   
8 Ordering supplies and 
accessories
This chapter provides information on purchasing cartridges and 
accessories available for your machine.
This chapter includes:
• Supplies
• Accessories
• How to purchase
Supplies
When the toner runs out, you can order the following type of toner 
cartridge for your machine:
Caution
When you purchase a new toner ca rtridge or supplies, you must 
purchase them in the same country you have purchased your 
machine. Otherwise, the toner cartridge or supplies will be 
incompatible with your machine  since the configuration of the 
toner cartridge or supplies vary depending on the countries.
Ty p eAverage yielda
a. Declared yield value in accordance with ISO/IEC 19798.
Part number
High yield 
toner cartridge Approx. 
5,500 (Black), 
5,000 (Color) CLP-K660B (Black)
CLP-C660B (Cyan)
CLP-M660B (Magenta)
CLP-Y660B (Yellow)
Standard yield 
toner cartridge Approx. 
2,500 (Black), 
2,000 (Color) CLP-K660A (Black)
CLP-C660A (Cyan)
CLP-M660A (Magenta)
CLP-Y660A (Yellow)
Paper transfer 
belt When the transfer 
belt has worn out 
with abrasion, you 
need to change it. 
By this time you 
may be notified with 
the transfer belt-
related message on 
the display. CLP-T660B
Accessories
You can purchase and install accessories to enhance your machine’s 
performance and capacity.
Note
Your machine may have two memory slots with a factory pre-
installed memory module in one slot. When you are expanding 
the memory capacity, you can add a memory module to the 
vacant memory slot, according to 
the table above. It is strongly 
recommended that you expand a memory module in vacant 
memory slot only, without removing a pre-installed memory 
module. If your machine has 128MB memory capacity and you 
want to add 512MB, the memory capacity expands up to 
640MB.
How to purchase
To order Samsung-authorized supplies or accessories, contact your local 
Samsung dealer or the retailer where you purchased your machine, or 
visit  www.samsungprinter.com
 and select your country/region to obtain 
information on calling for technical support.
AccessoryDescriptionPart number
Memory 
module Extends your machine’s 
memory capacity. • CLP-660 series
CLP-MEM101: 128 MB
CLP-MEM102: 256 MB
CLP-MEM103: 512 MB 
• CLP-610 series CLP-MEM201: 128 MB
CLP-MEM202: 256 MB
Optional 
tray 2 If you are experiencing 
frequent paper supply 
problems, you can 
attach an additional 500 
sheet tray. You can print 
documents in various 
sizes and types of print 
materials. CLP-S660A
Duplex unit Enables duplex printing  to save the paper 
consumption. CLP-U660A
Note: If you want to use 
the duplex feature, contact 
the sales point to 
purchase the duplex 
option.
Downloaded From ManualsPrinter.com Manuals 
						

							
9.1   
9 Installing accessories
Your machine is a full-featured mode l that has been optimized to meet 
most of your printing needs. Recognizing that each user may have 
different requirements, however,  Samsung makes several accessories 
available to enhance your machine’s capabilities.
This chapter includes:
• Precautions to take when installing accessories
• Installing a memory module
Precautions to take when installing accessories
• Disconnect the power cord
Never remove the control board cover while the power is turned on.
To avoid the possibility of an electrical shock, always disconnect the 
power cord when installing or removing ANY internal or external 
accessories.
• Discharge static electricity
The control board and internal accessories (network interface card or 
memory module) are sensitive to static  electricity. Before installing or 
removing any internal a ccessories, discharge static electricity from your 
body by touching something metal, such as the metal back plate on any 
device plugged into a grounded power source. If you walk around before 
finishing the installation, repeat this  procedure to discharge any static 
electricity again.
Installing a memory module
Your machine has a dual in-line memory module (DIMM). Use this 
memory module slot to install additional memory.
The machine has two memory slots with a factory pre-installed memory 
module in one slot. When you are expanding the memory capacity, you 
can add a memory module to the va cant memory slot. It is strongly 
recommended that you expand a memory module in vacant memory slot 
only without removing the pre-installed memory module. If your machine 
has 128 MB memory capacity and you want to add 512 MB, the memory 
capacity expands up to 640 MB.
Order information is provided for optional memory module. (See 
Accessories on page 8.1.)
1 Turn the machine off and unplug all cables from the machine. 2
Open the control board cover. Release the screw, then lift up the 
cover slightly and pull the cover to the right.
Note
If you want to remove an existing memory module, push the 
two latches at the ends of the module outward.
3 Take out a new memory module from the plastic bag.
4 Holding the memory module by the edges, align the memory 
module on the slot at about a 30- degree tilt. Make sure that the 
notches of the module and the groov es on the slot fit each other.
Note
The notches and grooves illustrated above may not match 
those on an actual memory module and its slot.
5 Press the memory module into the slot with care until you hear a 
click. 
Caution  
Do not press the memory modul e strongly or the module 
may be damaged. If the module does not seem to fit into 
the slot properly, carefully try the previous procedure again.
1control board cover
Downloaded From ManualsPrinter.com Manuals 
						

							
9.2   
6 Replace the control board cover and fasten the cover with the 
screw.
7 Reconnect the power cord and printer cable, and turn the machine 
on.
Note
To release the memory module, pull the two tabs on the 
sides of the slot outwards, then the module springs out. 
Activating the added memory in the PS printer 
properties
After installing the memory module, you need to select it in the printer 
properties of the PostScript printer driv er in order to use it. This activation 
is needed only the machine compatible with the PostScript driver.
1 Make sure that the PostScript prin ter driver is installed on your 
computer. For details about installing the PS printer driver, see 
Software section.
2 Click the Windows  Start menu.
3 For Windows 2000, select  Settings and then  Printers.
For Windows XP/2003, select  Printers and Faxes.
For Windows Vista, select  Control Panel > Hardware and Sound  
>  Printers .
4 Select the  Samsung CLP-6xx Series PS  printer.
5 Click the right mouse button on the printer icon and select 
Properties .
6 Select  Device Settings .
7 Select the amount of memory you installed from 
Printer Memory in 
the 
Installable Options section.
8 Click  OK.
Downloaded From ManualsPrinter.com Manuals 
						

							
10.1   
10 Specifications
This chapter includes:
• CLP-610 Series
• CLP-660 Series
Note
The numbers herein is subject to change according to its install 
environment.
CLP-610 Series
ItemSpecifications and Description
Printing speed
aUp to 20 ppmb (A4), 21 ppm (Letter)
Duplex printing 
speed
Up to 9.86 ipmc (A4, Letter)
Printing resolution
Max. 2,400 x 600 dpi effective output
Warm-up time
Less than 40 seconds
First print out time
20 seconds (from Ready mode)
Consumables life
Standard yield 
toner cartridged• Average continuous  colored cartridge yield: 
Approx. 2,500 standard 
pages (Black)
e
• Average continuous 
colored cartridge yield: 
Approx. 2,000 standard 
pages (Yellow/Magenta/
Cyan)
e
High yield toner 
cartridged• Average continuous colored cartridge yield: 
Approx. 5,500 standard 
pages (Black)
• Average continuous  colored cartridge yield: 
Approx. 5,000 standard 
pages (Yellow/Magenta/
Cyan)
Paper transfer 
belt • 50,000 pages (Black, 
A4, Letter)
• 50,000 pages (Yellow/ Magenta/Cyan, A4, 
Letter)
Noise level
f• Less than 29 dBA (from Ready mode)
• Less than 51 dBA (from Printing mode)
Power ratingAC 110 - 127 V or AC 220 - 240 V
See the Rating label on the machine for the 
correct voltage, frequency (hertz) and type of 
current for your machine.
Power 
consumption
• Printing mode: less than 550 W
• Ready mode: less than 120 W
• Power save mode: less than 17 W
External dimension 
(W x D x H)
432 x 432 x 424 mm (17 x 17 x 16.7 inches)
(without optional tray)
Weight
25.6 Kg (56.44 lbs) 
(including consumables)
Package weight
Paper3.8 kg (8.38 lbs)
Plastic1.1 kg (2.43 lbs)
Operating 
environment
Operating 
Temperature10 to 32.5 °C (50 to 90 °F)
Recommended 
Temperature15 to 30 °C (59 to 86 °F)
Operating 
Humidity20 to 80% RH
Recommended 
Humidity20 to 80% RH
Memory
128 MB (expandable up to 384  MB)
DDR2 only, 2 slots
Fonts
SPL-COS Fonts
PCL61 bitmap 45 scalable
Interface
USB 2.0
Ethernet 10/100 Base TX
OS compatibility & 
driver
Windows 2000/ 
2003/ XP/ VistaSPL-C (Samsung Printer 
Language Color) driver, 
PCL6 driver
Various Linux 
OSSPL-C driver
Mac 10.3 ~ 10.5SPL-C driver
Printer language
PCL5c, PCL6, SPL-C
Option
500 sheet tray
Duty cycle
Up to 65,000 pages (Monthly)
Fusing 
temperature
180 °C (356 °F)
ItemSpecifications and Description
Downloaded From ManualsPrinter.com Manuals 
						

							
10.2   
CLP-660 Series
Note
The symbol * denotes an optional feature depending on 
machines.   
a. Printing speed: it will be affected by operating system used, computing 
performance, application software, connec ting method, media type, media size, 
and job complexity.
b. ppm: page per minute.
c. ipm: image per minute.
d. Declared yield value in accordance with ISO/IEC 19798.
e. It varies depending on the product configuration.
f. Noise Level: sound pressure level, ISO 7779.
ItemSpecifications and Description
Printing speed
aUp to 24 ppmb (A4), 25 ppm (Letter)
Duplex printing 
speed*
Up to 11.8 ipmc (A4, Letter)
Printing resolution
Max. 2,400 x 600 dpi effective output
Warm-up time
Less than 30 seconds
First print out time
14 seconds (from Ready mode)
Consumables life
Standard yield 
toner cartridged• Average continuous  colored cartridge yield: 
Approx. 2,500 standard 
pages (Black)
e
• Average continuous 
colored cartridge yield: 
Approx. 2,000 standard 
pages (Yellow/Magenta/
Cyan)
e
High yield toner 
cartridge• Average continuous colored cartridge yield: 
Approx. 5,500 standard 
pages (Black)
• Average continuous  colored cartridge yield: 
Approx. 5,000 standard 
pages (Yellow/Magenta/
Cyan)
Paper transfer 
belt • 50,000 pages (Black, A4, Letter)
• 50,000 pages (Yellow/
Magenta/Cyan, A4, 
Letter)
Noise level
f• Less than 29 dBA (from Ready mode)
• Less than 53 dBA (from Printing mode)
Power ratingAC 110 - 127 V or AC 220 - 240 V
See the Rating label on the machine for the 
correct voltage, frequency (hertz) and type of 
current for your machine.
Power consumption
• Printing mode: less than 700 W
• Ready mode: less than 120 W
• Power save mode: less than 17 W
External dimension 
(W x D x H)
432 x 432 x 424 mm (17 x 17 x 16.7 inches)
(without optional tray)
Weight
25.6 Kg (55.44 lbs) 
(including consumables)
Package weight
Paper3.8 kg (8.38 lbs)
Plastic1.1 kg (2.43 lbs)
Operating 
environment
Operating 
Temperature10 to 32.5 °C (50 to 90 °F)
Recommended 
Temperature15 to 30 °C (59 to 86 °F)
Operating 
Humidity20 to 80% RH
Recommended 
Humidity20 to 80% RH
Memory
128 MB (expandable up to 640 MB)
DDR1 only, 2 slots
Fonts
PCL61 bitmap 45 scalable
PS136
Interface
USB 2.0
Ethernet 10/100 Base TX
OS compatibility & 
driver
Windows 2000/ 
2003/ XP/ VistaPCL6 driver, PostScript 
driver
Various Linux 
OSPostScript driver
Mac 10.1 ~ 10.5PostScript driver
Printer language
PCL5c, PCL6, PostScript 3
Option
500 sheet tray
Duty cycle
Up to 80,000 pages (Monthly)
Fusing temperature
180 °C (356 °F)
ItemSpecifications and Description
Downloaded From ManualsPrinter.com Manuals 
						

							10.3   
a. Printing speed: it will be affected by operating system used, computing 
performance, application software, connecting method, media type, media 
size, and job complexity.
b. ppm: page per minute.
c. ipm: image per minute.
d. Declared yield value in accordance with ISO/IEC 19798.
e. It varies depending on the product configuration.
f. Noise Level: sound pressure level, ISO 7779.
Downloaded From ManualsPrinter.com Manuals 
						

							
11.1   
11 Glossary
BOOTP
It stands for Bootstrap Protocol, a  network protocol used by a network 
client to obtain its IP address automatically. This is usually done in the 
bootstrap process of computers or  operating systems running on them. 
The BOOTP servers assign the IP address from a pool of addresses to 
each client. 
Control Panel
A control panel is a flat area where co ntrol or monitoring instruments are 
displayed. They are typically found  in top or front of the machine. 
Coverage
This is the printing term used for toner usage measurement on printing 
and generally used as 5% coverage. 5% coverage means that an A4 
sized paper has about 5% image or text on it. So, if the paper or original 
has complicated images or lots of text on it, the coverage will be over 5% 
and at the same time, toner usage will be as much as the coverage.
Default
The first set values.
DHCP
A Dynamic Host Configuration Protocol (DHCP) is a client-server 
networking protocol. A DHCP server pr ovides configuration parameters 
specific to the DHCP client host requesting, generally, information 
required by the client host to participate on an IP network.
DIMM
Dual Inline Memory Module, a small circuit board that holds memory. 
DIMM stores all the data within the ma chine like printing data, received 
fax data, or scanned data.
DNS
The Domain Name Server (DNS) is a system that stores information 
associated with domain names in a di stributed database on networks. 
DPI
This is the measurement of resolution which is used for printing or 
scanning. Generally, more dots per inch result in a higher resolution, 
more visible detail in the image, and a larger file size. 
Duplex
This is a mechanism which automatically flips over a sheet of paper so 
that the machine can print (or scan) on both sides of the paper. A printer 
equipped with a Duplex can print double-sided. 
Duty Cycle
Duty cycle is the page quantity which does not affect printer performance 
for a month. Generally the printer  has the lifespan limitation such as 
pages per year. The lifespan means t he average capacity of print-outs, 
usually within the warranty period. Fo r example, if the duty cycle is 48,000 
pages per month assuming 20 working days, a printer limits 2,400 pages 
a day, which is not small amount.
Ethernet
Ethernet is a frame-base d computer networking technology for local area 
networks (LANs). It defines wiring and signaling for the physical layer, 
and frame formats and protocols for the media access control (MAC)/data 
link layer of the OSI model. It has become the most widespread LAN 
technology in use presently.
Fuser Unit 
This is the part of a laser printer th at melts the toner onto the print media. 
It consists of two hot rollers. After toner is transferred onto the paper, the 
fuser unit applies heat and pressure to ensure that the toner stays on the 
paper permanently, which is why paper is warm when it comes out of a 
laser printer.
Gateway
This is a connection between computer networks, or between a computer 
network and a telephone line. And it is  very popular, as it is a computer 
or a network that allows access to another computer or network.
Grayscale
Shades of gray that represent light and dark portions of an image when 
color images are converted to gra yscale; colors are represented by 
various shades of gray.
Halftone
This is an image type that simulate s grayscale by varying the number of 
dots. Highly colored areas consist of a large number of dots, while lighter 
areas consist of a smaller number of dots.
Intranet
This is a private network that us es Internet Protocols, network 
connectivity, and possi bly the public telecommunication system to 
securely share part of an organizations information or operations with its 
employees. Sometimes the term refers  only to the most visible service, 
the internal website.
IP address
An Internet Protocol address (IP address) is a unique number that 
devices use in order to identify and communicate with each other on a 
network utilizing the Internet Protocol standard (IP).
IPM
The Images Per Minute.
Downloaded From ManualsPrinter.com Manuals 
						

							
11.2   
ISO
The International Organization for Standardization (ISO) is an 
international standard-setting body  composed of representatives from 
national standards bodies. It produces world-wide industrial and 
commercial standards.
LED
A light-emitting diode (LED) is a semiconductor device that indicates the 
status of a machine. 
Print Media
Media such as papers, envelopes, labels, and transparencies which can 
be used on a printer, a scanner, a fax or, a copier. 
OPC Drum
A mechanism that makes a virtual image for print using a laser beam 
emitted from a laser printer, and it  is usually green or gray-colored and 
cylinder-shaped. An exposing unit of a drum is slowly worn away by its 
usage of the printer, and it should  be replaced appropriately since it  
becomes scratched from grit in paper.
PDF
Portable Document Format (PDF) is a proprietary file format developed 
by Adobe Systems for representing  two-dimensional documents in a 
device-independent and resolution-independent format.
PostScript
PostScript (PS) is a page description language and programming 
language used primarily in the electron ic and desktop publishing areas, 
and that is run in an interpreter to generate an image.
PPM
Pages Per Minute. PPM shows the printers speed, how many pages a 
printer can actually print per minute.
PRN file
An interface for a device  driver, this allows software to interact with the 
device driver using standard input/ output system calls, which simplifies 
many tasks. 
Protocol
This is a convention or standard that  controls or enables the connection, 
communication, and data transfer between two computing endpoints.
PS
See PostScript.
Resolution
The sharpness of an image, measured in  dots per inch (dpi). The higher 
the dpi, the greater the resolution.
Subnet Mask 
A bitmask used to tell how many bi ts in an octet(s) identify the 
subnetwork, and how many bits provide room for host addresses.  
TCP/IP
The Transmission Control Protocol (TCP ) and the Internet Protocol (IP). 
It is the set of communications prot ocols that implement the protocol 
stack on which the Internet and  most commercial networks run.
toner cartridge
It is a kind of bottle within a machine like a printer which contains toner. 
Toner is a powder used in laser prin ters and photocopiers which forms the 
text and images on the printed paper.  Toner can be melted by the heat of 
the fuser, causing it to bind to the fibers in the paper.
URL
Uniform Resource Locator (URL) is t he global address of documents and 
resources on the Internet. The first part of the address indicates what 
protocol to use, the second part specifies the IP address or the domain 
name where the resource is located.
USB
Universal serial bus (USB) is a st andard that was developed by the USB 
Implementers Forum, Inc., to conne ct computers and peripherals. Unlike 
the parallel port, USB is designed to  concurrently connect a single 
computer USB port to multiple peripherals.
Downloaded From ManualsPrinter.com Manuals 
						

							
1
B
Back 1.4
C
cleaninginside 6.1
outside 6.1
control panel 1.2, 1.4
D
default settings loading paper 3.5
tray setting 3.5
Display 1.4
driver
feature 2.1
installation 3.3
E
energy saver 3.5
error message 7.7
F
front cover 1.2
front cover handle 1.2
J
jamclearing paper from the tray1 7.1
tips for avoiding paper jams 7.1
L
language 3.4
LEDStatus 1.5
Left/right arrows 1.4
Linux problems 7.16
requirements 2.2
M
Macintoshproblems 7.16
requirements 2.2
Maintenance 6.1
maintenance parts 6.7
toner cartridge 6.3
memory module
installing 9.1
ordering 8.1
Menu 1.4
message on the display screen 7.7
multi-purpose tray 1.2
multi-purpose tray handle 1.2
N
network port 1.3
requirements 3.2
setting up 3.1
O
OK 1.4
optional tray 1.2, 8.1
ordering supplies 8.1
Output tray 1.2
P
paper
changing the size 4.5
clearing jam 7.1
loading in the multi-purpose tray 4.6
loading in the optional tray 4.4
loading in the tray1 4.4
paper feeding problems 7.10
setting the paper size of the tray 4.7
PostScript problems 7.15
Power Save 3.5
Power Saver using power save mode 3.5
Power switch 1.3
print media guidelines 4.1
media sizes 4.3 selecting print media 4.1
specification 4.2
print/report from the website 6.7
Printer software CD 2.1
printing 5.1 problem solving 7.10
problems display message 7.7
Linux 7.16
Macintosh 7.16
paper feeder 7.10
PostScript 7.15
printing 7.10
printing quality 7.12
Windows 7.15
Q
qualitysolving the printing problem 7.12
R
replacing componentstoner cartridge 6.4
S
specifications 10.1, 11.1
Status 1.4
Stop 1.4
supplied software 2.1
supplieschecking the supplies life 6.1
expected toner cartridge life 6.3
ordering supplies 8.1
SyncThru Web Service 6.7
T
tray
adjusting the width and length 4.5
optional tray 1.2
tray1 1.2
troubleshooting 7.1
INDEX
Downloaded From ManualsPrinter.com Manuals 
						

							
2
U
USBport 1.3
W
Windows
problems 7.15
requirements 2.2
Downloaded From ManualsPrinter.com Manuals