Samsung CLP 650N User Manual

							
2
Using an Existing Watermark  .........................................................................................  21
Creating a Watermark  ...................................................................................................  21
Editing a Watermark  .....................................................................................................  21
Deleting a Watermark  ...................................................................................................  21
Using Overlays  ................................................................................................................ ......  22
What is an Overlay? ......................................................................................................  22
Creating a New Page Overlay  .........................................................................................  22
Using a Page Overlay  ....................................................................................................  22
Deleting a Page Overlay  ................................................................................................  22
Chapter 4: USING WINDOWS POSTSCRIPT DRIVER
Printer Settings  .............................................................................................................. .......  23
Advanced ..................................................................................................................  23
Using Help ...................................................................................................................   23
Chapter 5: SHARING THE PRINTER LOCALLY
Setting Up a Host Computer  ...................................................................................................   24
Setting Up a Client Computer  ..................................................................................................  24
Chapter 6: USING SMART PANEL
Understanding Smart Panel  ....................................................................................................   25
Opening the Troubleshooting Guide  .........................................................................................  25
Using Printer Settings Utility  ........... ..................................................................................... ...  26
Using Onscreen Help  .....................................................................................................  26
Changing the Smart Panel Program Settings  .............................................................................  26
Chapter 7: USING YOUR PRINTER IN LINUX
System Requirements  ........................................................................................................... . 27
Installing the Printer Driver ................................................................................................. ....  28
Changing the Printer Connection Method  .........................................................................  29
Uninstalling the Printer Driver  ........................................................................................  30
Using the Configuration Tool  .................................................................................................. . 30
Changing LLPR Properties  ...................................................................................................... . 31
Downloaded From ManualsPrinter.com Manuals 
						

							
3
Chapter 8: USING YOUR PRINTER WITH A MACINTOSH
Installing Software for Macintosh  ............................................................................................. 32
Setting Up the Printer  ........................................................................................................ ....  33
For a Network-connected Macintosh  ................................................................................  33
For a USB-connected Macintosh  .....................................................................................  33
Printing ...................................................................................................................... ..........  34
Printing a Document  .....................................................................................................  34
Changing Printer Settings  ..............................................................................................  34
Printing Multiple Pages on One Sheet of Paper  ......... .........................................................  35
Downloaded From ManualsPrinter.com Manuals 
						

							
Installing Printer Software in Windows
4
1Installing Printer 
Software in Windows
This chapter includes:
• Installing Printer Software
• Changing the Software Language
• Reinstalling Printer Software
•Removing Printer Software
Installing Printer Software
You can install the printer software for local printing or network 
printing. To install the printer software on the computer, 
perform the appropriate installation procedure depending on 
the printer in use.
A printer driver is software that lets your computer 
communicate with your printer. The procedure to install drivers 
may differ depending on the operating system you are using.
All applications should be closed  on your PC before beginning 
installation. 
Installing Software for Local Printing
A local printer is a printer direct ly attached to your computer 
using the printer cable supplied with  your printer, such as a USB 
or parallel cable. If your printe r is attached to a network, skip 
this step and go to “Installing Software for Network Printing” on 
page 7.
You can install the printer software using the typical or custom 
method.
NOTE: If the “New Hardware Wizard” window appears during 
the installation procedure, click   in the upper right corner of 
the box to close the window, or click Cancel.
Typical Installation
This is recommended for most users. All components necessary 
for printer operations will be installed.
1Make sure that the printer is connected to your computer 
and powered on.
2Insert the supplied Printer software CD into your CD-ROM 
drive.
The Printer software CD should automatically run, and an 
installation window appears.
If the installation window does not appear, click 
Start and 
then 
Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive and click 
OK.
3Click Next. 
• If necessary, select a language from the drop-down list.
• 
View User’s Guide: Allows you to view the User’s 
Guide. If your computer do esn’t have Adobe Acrobat, 
click on this option and it w ill automatically install Adobe 
Acrobat Reader for you.
4Select Typical installation for a local printer. Click 
Next.
Downloaded From ManualsPrinter.com Manuals 
						

							
Installing Printer Software in Windows
5
NOTE: If your printer is not already connected to the 
computer, the following window will appear.
• After connecting the printer, click 
Next.
• If you don’t want to connect the printer at this time, click 
Next, and No on the following screen. Then the installation 
will start and a test page will not be printed at the end of the 
installation.
• The installation window that appears in this User’s  Guide may differ depending on the printer and 
interface in use.
5After the installation is fini shed, a window asking you to 
print a test page appears. If you choose to print a test 
page, select the checkbox and click 
Next.
Otherwise, just click 
Next and skip to step 7.
6If the test page prints out correctly, click Yes.
If not, click 
No to reprint it.
7To register yourself as a user  of Samsung Printers in order 
to receive information from Samsung, select the checkbox 
and click 
Finish. You are now sent  to the Samsung web 
site.
Otherwise, just click 
Finish.
NOTE: After setup is complete, if your printer driver doesn’t 
work properly, reinstall the printer driver. See “Reinstalling 
Printer Software” on page 10.
Custom Installation
You can choose individual components to install.
1Make sure that the printer is  connected to your computer 
and powered on.
2Insert the supplied Printer software CD into your CD-ROM 
drive.
The Printer software CD should automatically run, and an 
installation window appears.
If the installation window does not appear, click 
Start and 
then 
Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive and click 
OK.
Downloaded From ManualsPrinter.com Manuals 
						

							
Installing Printer Software in Windows
6
3Click Next. 
• If necessary, select a langua ge from the drop-down list.
• 
View User’s Guide: Allows you to view the User’s 
Guide. If your computer do esn’t have Adobe Acrobat, 
click on this option and it will automatically install Adobe 
Acrobat Reader for you.
4Select Custom installation. Click Next.
5Select your printer and click Next.
NOTE: If your printer is not already connected to the 
computer, the following window will appear.
• After connecting the printer, click 
Next.
• If you don’t want to connect the printer at this time, click 
Next, and No on the following screen.  Then the installation 
will start and a test page will not be printed at the end of the 
installation.
• The installation window th at appears in this User’s 
Guide may differ depending on the printer and 
interface in use.
6Select the components to be installed and click Next.
You can change the desired inst allation folder by clicking 
[Browse].
7After the installation is fini shed, a window asking you to 
print a test page appears. If you choose to print a test 
page, select the checkbox and click 
Next.
Otherwise, just click 
Next and skip to step 9.
8If the test page prints out correctly, click Yes.
If not, click 
No to reprint it.
Downloaded From ManualsPrinter.com Manuals 
						

							
Installing Printer Software in Windows
7
9To register yourself as a user of Samsung Printers in order 
to receive information from  Samsung, select the checkbox 
and click 
Finish. You are now sent to the Samsung web 
site.
Otherwise, just click 
Finish.
Installing Software for Network 
Printing
When you connect your printer  to a network, you must first 
configure the TCP/IP settings fo r the printer. After you have 
assigned and verified the TCP/ IP settings, you are ready to 
install the software on each  computer on the network.
You can install the printer software using the typical or custom 
method.
Typical Installation
This is recommended for most us ers. All components necessary 
for printer operations will be installed.
1Make sure that the printer is connected to your network 
and powered on. For details about connecting to the 
network, see the supplied printer’s User’s Guide.
2Insert the supplied Printer software CD into your CD-ROM 
drive.
The Printer software CD should  automatically run, and an 
installation window appears.
If the installation window does not appear, click Start and 
then 
Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive and click 
OK.
3Click Next. 
• If necessary, select a language from the drop-down list.
• 
View User’s Guide: Allows you to view the User’s 
Guide. If your computer do esn’t have Adobe Acrobat, 
click on this option and it w ill automatically install Adobe 
Acrobat Reader for you.
4Select Typical installation for a network printer. Click 
Next.
Downloaded From ManualsPrinter.com Manuals 
						

							
Installing Printer Software in Windows
8
5The list of printers available on the network appears. 
Select the printer you want to install from the list and then 
click 
Next. 
• If you do not see your printer on the list, click 
Update to 
refresh the list, or select 
Add TCP/IP Port to add your 
printer to the network. To add the printer to the 
network, enter the port name and the IP address for the 
printer.
• To find a shared network printer (UNC Path), select 
Shared Printer [UNC] and enter the shared name 
manually or find a shared printer by clicking the 
Browse 
button.
6After the installation is finished, a window appears asking 
you to print a test page and to register yourself as a user 
of Samsung Printers in order to receive information from 
Samsung. If you so desire, select the corresponding 
checkbox(es) and click 
Finish.
Otherwise, just click 
Finish.
NOTE: After setup is complete, if your printer driver doesn’t 
work properly, reinstall the printer driver. See “Reinstalling 
Printer Software” on page 10.
Custom Installation
You can choose individual components to install and set a 
specific IP address.
1Make sure that the printer is connected to your network 
and powered on. For details about connecting to the 
network, see the supplied printer’s User’s Guide.
2Insert the supplied Printer so ftware CDinto your CD-ROM 
drive.
The Printer software CD should automatically run, and an 
installation window appears.
If the installation window does not appear, click 
Start and 
then 
Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive and click 
OK.
3Click Next. 
• If necessary, select a language from the drop-down list.
• 
View User’s Guide: Allows you to view the User’s 
Guide. If your computer do esn’t have Adobe Acrobat, 
click on this option and it w ill automatically install Adobe 
Acrobat Reader for you.
4Select Custom installation. Click Next.
Downloaded From ManualsPrinter.com Manuals 
						

							
Installing Printer Software in Windows
9
5The list of printers available on the network appears. 
Select the printer you want to install from the list and then 
click 
Next. 
• If you do not see your printer on the list, click 
Update to 
refresh the list, or select 
Add TCP/IP Port to add your 
printer to the network. To add the printer to the 
network, enter the port name and the IP address for the 
printer.
• To find a shared network printer (UNC Path), select 
Shared Printer [UNC] and enter the shared name 
manually or find a shared printer by clicking the 
Browse 
button.
TIP: If you want to set a specific IP address on a specific 
network printer, click the 
Set IP Address button. The Set IP 
Address window appear s. Do as follows:
a. Select a printer to be set with a specific IP address from the  list.
b. Configure an IP address, subnet mask, and gateway for the 
printer manually and click
 Configure to set the specific IP 
address for the network printer.
c. Click Next.
6Select the components to be installed. After selecting the 
components, the following wind ow appears. You can also 
change the printer name, set th e printer to be shared on 
the network, set the printer  as the default printer, and 
change the port name of each printer. Click 
Next.
To install this software on a server, select the 
Setting up 
this printer on a server
 checkbox.
7After the installation is fini shed, a window appears asking 
you to print a test page and to register yourself as a user 
of Samsung Printers in order to receive information from 
Samsung. If you so desire,  select the corresponding 
checkbox(es) and click 
Finish.
Otherwise, just click 
Finish.
NOTE: After setup is complete, if your printer driver doesn’t 
work properly, reinstall the printer driver. See “Reinstalling 
Printer Software” on page 10.
Downloaded From ManualsPrinter.com Manuals 
						

							
Installing Printer Software in Windows
10
Changing the Software 
Language
After installation of the software, you can change the display 
language. 
1Click the Windows Start menu.
2Select Programs or All Programs and then your printer 
driver name
.
3Select Language Selection.
4Select the desired language  from the language selection 
window, and click 
OK.
Reinstalling Printer Software
You can reinstall the software if installation fails.
1Start Windows.
2From the Start menu select Programs or All Programs 
→ your printer driver name → Maintenance.
3Select Repair and click Next.
4The list of printers available on the network appears. 
Select the printer you want to  install from the list and then 
click 
Next. 
• If you do not see your printer on the list, click 
Update to 
refresh the list, or select 
Add TCP/IP Port to add your 
printer to the network. To add the printer to the 
network, enter the port name and the IP address for the 
printer.
• To find a shared network printer (UNC Path), select 
Shared Printer [UNC] and enter the shared name 
manually or find a shared printer by clicking the 
Browse 
button.
You will see a component list so that you can reinstall any 
item individually.
NOTE: If your printer is not already connected to the 
computer, the following window will appear.
• After connecting the printer, click 
Next.
• If you don’t want to connect the printer at this time, click 
Next, and No on the following screen.  Then the installation 
will start and a test page will not be printed at the end of the 
installation.
• The reinstallation window that appears in this User’s  Guide may differ depending on the printer and 
interface in use.
5Select the components you want to reinstall and click 
Next.
If you installed the printer software for local printing 
and 
you select your printer driver name, the window 
asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click 
Next.
b. If the test page prints out correctly, click Yes.
If it doesn’t, click 
No to reprint it.
6When the reinstallation is done, click Finish.
Downloaded From ManualsPrinter.com Manuals 
						

							
Installing Printer Software in Windows
11
Removing Printer Software
1Start Windows.
2From the Start menu select Programs or All Programs 
→ your printer driver name → Maintenance.
3Select Remove and click Next.
You will see a component list so that you can remove any 
item individually.
4Select the components you want to remove and then click 
Next.
5When your computer asks you to confirm your selection, 
click 
Yes.
The selected driver and all of its components are removed 
from your computer.
6After the software is removed, click Finish.
Downloaded From ManualsPrinter.com Manuals