Samsung CLP 550N User Manual

USING YOUR PRINTER IN LINUXC.11
C
3The LLPR Properties window opens. 
The following six tabs are at the top of the window:
•General - allows you to change the paper size, the paper 
type, the paper source, the orientation of the documents; 
enables the duplex feature, adds start and end banners, 
and changes the number of pages per sheet.
•Margins - allows you to specify the page margins. The 
graphics on the right shows the current settings. These 
margins do not apply when printing regular PostScript...

USING YOUR PRINTER IN LINUXC.12
MEMO
Downloaded From ManualsPrinter.com Manuals 

2
This chapter describes how to use the printer’s control 
panel.
This chapter includes:
• Understanding the Control Panel
• Using Control Panel Menus
USING THE CONTROL PANEL...

PRINTING FROM DOS APPLICATIONSD.2
About the Remote Control Panel
DOS users have access to many printer features through specific 
DOS printer drivers; however, many software manufactures do 
not develop printer drivers for their software programmes. Your 
printer provides the software control panel for improved printer 
control when DOS printer drivers are not available or when 
certain print settings are not available through DOS software 
programmes. 
NOTE: The printer’s Remote Control Panel is not a...

PRINTING FROM DOS APPLICATIONSD.3
D
2Click Custom Install.
3Click Remote Control Panel and then click Next.
4When the installation is completed, click Finish. 
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 

PRINTING FROM DOS APPLICATIONSD.4
Reinstalling Remote Control Panel
1From the Start menu, select Programs.
2Select Samsung CLP-550 Series, and then Printer 
Maintenance.
3Click Repair and then click Next. 
4Click Remote Control Panel and then click Next. 
5When reinstallation is done, click Finish.
Removing Remote Control Panel
1From the Start menu, select Programs.
2Select Samsung CLP-550 Series, and then Printer 
Maintenance.
3Check Remove and then click Next. 
4Click Remote Control Panel and then...

PRINTING FROM DOS APPLICATIONSD.5
D
Selecting Print Settings
You can use this Remote Control Panel to select print settings 
that may not be available on some DOS Programmes. Typically, 
duplicate print settings that are selected from a DOS software 
programme override the ones that are selected in the Remote 
Control Panel.
Starting the Remote Control Panel
1From the Start menu, select Programs.
2Select Samsung CLP-550 Series and then Remote 
Control Panel. 
3The Printer Settings Utility window allows...

PRINTING FROM DOS APPLICATIONSD.6
Using the Remote Control Panel Tabs
The Remote Control Panel allows you to access the following 
features:
Printing Tab
In this tab, you can configure general settings for printing.
•Paper Size sets the paper size. 
•Orientation determines how the output is printed on the 
page. 
•Paper Tray sets the default paper source. 
•Auto CR sets how the printer performs a carriage return. 
•Copies sets the number of copies printed per page. 
•Quality specifies the print quality....

PRINTING FROM DOS APPLICATIONSD.7
D
Config Tab
You can configure various printer features. 
•Emulation selects the emulation for printing a document. 
The factory default is Auto. 
•Power Save determines the length of time the printer waits 
after a job is printed before it goes to a reduced power state. 
If the printer is used frequently, select OFF which keeps the 
printer ready to print with the minimum warm-up time. This 
uses more power to keep the printer warm and ready to print. 
•Auto Continue...

PRINTING FROM DOS APPLICATIONSD.8
Job Tab
You can set options for improving the quality of your print job.
•Paper Type provides the printer with information about the 
type of paper to be used for a print job. For the best result, 
set this to the paper type you loaded in the tray of the printer. 
When using the plain paper, set this to Printer Default. 
•Time out determins the amount of time (in seconds) the 
printer will wait before printing the last page of a print job 
that does not end with a...