Samsung CLP 550N User Manual

							USING YOUR PRINTER IN LINUXC.11
C
3The LLPR Properties window opens. 
The following six tabs are at the top of the window:
•General - allows you to change the paper size, the paper 
type, the paper source, the orientation of the documents; 
enables the duplex feature, adds start and end banners, 
and changes the number of pages per sheet.
•Margins - allows you to specify the page margins. The 
graphics on the right shows the current settings. These 
margins do not apply when printing regular PostScript 
data.
•Image - allows you to set image options that are used 
when printing image files, i.e. when a non-PostScript 
document is passed to LLPR on the command line. Color 
settings will also take effect for postscript documents. 
•Text - allows you to select the density of the text and 
turn the syntax coloring on or off.
•HP-GL/2 - allows you to set default options to print 
documents in the HP-GL/2 format, which is used by some 
plotters.
•Advanced - allows you to override the default settings for 
the printer.
If you click the Save button at the bottom of the window, 
the options are kept between LLPR sessions.
Use the Help button to view details about the options in the 
window.
4To apply the options, click OK in the LLPR Properties 
window. You are returned to the Linux LPR window. To 
start printing, click OK.
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							USING YOUR PRINTER IN LINUXC.12
MEMO
Downloaded From ManualsPrinter.com Manuals 
						

							2
This chapter describes how to use the printer’s control 
panel.
This chapter includes:
• Understanding the Control Panel
• Using Control Panel Menus
USING THE CONTROL PANEL
*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals
NOTE: If you are a CLP-550 user, you need to install an 
optional network interface card. For more information, see 
Appendix F, "Installing Printer Options".
USING YOUR PRINTER ON 
A NETWORK
*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals 
						

							PRINTING FROM DOS APPLICATIONSD.2
About the Remote Control Panel
DOS users have access to many printer features through specific 
DOS printer drivers; however, many software manufactures do 
not develop printer drivers for their software programmes. Your 
printer provides the software control panel for improved printer 
control when DOS printer drivers are not available or when 
certain print settings are not available through DOS software 
programmes. 
NOTE: The printer’s Remote Control Panel is not a printer driver. 
It should be used to set print settings that are not available 
through DOS software programmes. Printer drivers are supplied by 
the manufacturers of your DOS software programmes. If your DOS 
software Programme does not include a printer driver for your 
printer, contact the manufacturer of the software or use one of the 
alternate printer drivers.
Installing the Remote Control Panel 
1Place the CD-ROM in the CD-ROM drive. Installation will 
start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, type x:\setup.exe in the 
Open box (where x is the drive letter for the CD-ROM drive) 
and click OK.
NOTE: When the following window opens, connect your printer to 
the computer and turn the printer on. Then click Next.
If the printer is already connected and turned on, this screen does 
not appear. Skip to the next step.
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							PRINTING FROM DOS APPLICATIONSD.3
D
2Click Custom Install.
3Click Remote Control Panel and then click Next.
4When the installation is completed, click Finish. 
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							PRINTING FROM DOS APPLICATIONSD.4
Reinstalling Remote Control Panel
1From the Start menu, select Programs.
2Select Samsung CLP-550 Series, and then Printer 
Maintenance.
3Click Repair and then click Next. 
4Click Remote Control Panel and then click Next. 
5When reinstallation is done, click Finish.
Removing Remote Control Panel
1From the Start menu, select Programs.
2Select Samsung CLP-550 Series, and then Printer 
Maintenance.
3Check Remove and then click Next. 
4Click Remote Control Panel and then click Next. 
5When removing is completed, click Finish.
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							PRINTING FROM DOS APPLICATIONSD.5
D
Selecting Print Settings
You can use this Remote Control Panel to select print settings 
that may not be available on some DOS Programmes. Typically, 
duplicate print settings that are selected from a DOS software 
programme override the ones that are selected in the Remote 
Control Panel.
Starting the Remote Control Panel
1From the Start menu, select Programs.
2Select Samsung CLP-550 Series and then Remote 
Control Panel. 
3The Printer Settings Utility window allows you to access all 
the information you need when using your printer. If 
necessary, click the other tabs on the top of the window to 
access other features.
4When you finish changing the settings, click Send. 
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							PRINTING FROM DOS APPLICATIONSD.6
Using the Remote Control Panel Tabs
The Remote Control Panel allows you to access the following 
features:
Printing Tab
In this tab, you can configure general settings for printing.
•Paper Size sets the paper size. 
•Orientation determines how the output is printed on the 
page. 
•Paper Tray sets the default paper source. 
•Auto CR sets how the printer performs a carriage return. 
•Copies sets the number of copies printed per page. 
•Quality specifies the print quality.
•Margins sets the top and left margin of the print material. 
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							PRINTING FROM DOS APPLICATIONSD.7
D
Config Tab
You can configure various printer features. 
•Emulation selects the emulation for printing a document. 
The factory default is Auto. 
•Power Save determines the length of time the printer waits 
after a job is printed before it goes to a reduced power state. 
If the printer is used frequently, select OFF which keeps the 
printer ready to print with the minimum warm-up time. This 
uses more power to keep the printer warm and ready to print. 
•Auto Continue determines what action the printer should 
take if the Multi-Purpose Tray is empty when a manual feed 
print job is sent to the printer. If it is checked, the printer will 
pick up the paper from the tray after fifteen seconds. 
Otherwise, the printer will wait for you to load paper in the 
Multi-Purpose Tray. 
•Jam Recovery determines what action the printer should 
take when a paper jam occurs. If it is unchecked, the printer 
does not reprint a page that has jammed. If it is checked, the 
printer keeps the image in memory for a printed page until 
the printer signals that the page has successfully printed. The 
printer reprints all jammed pages. 
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							PRINTING FROM DOS APPLICATIONSD.8
Job Tab
You can set options for improving the quality of your print job.
•Paper Type provides the printer with information about the 
type of paper to be used for a print job. For the best result, 
set this to the paper type you loaded in the tray of the printer. 
When using the plain paper, set this to Printer Default. 
•Time out determins the amount of time (in seconds) the 
printer will wait before printing the last page of a print job 
that does not end with a command to print the page or a 
formfeed character. You can set it from 0 to 300 seconds. 
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls