Samsung CLP 550N User Manual

							USING YOUR PRINTER WITH A MACINTOSHA.7
A
Canceling a Print Job
To cancel a print job, press the Cancel button ( )on the 
control panel. The printer finishes printing the page that is 
moving through the printer and deletes the rest of the print job.
Using Advanced Printing Features
- Printing Multiple Pages on One Sheet of Paper
- Duplex Printing
- Printing Your Document to a Selected Paper Size
Printing Multiple Pages on One Sheet of 
Paper
You can print more than one page on a single sheet of paper. 
This feature provides a cost-effective way to print draft pages.
1From your Macintosh application, select Print from the File 
menu. 
2Select the Layout.
3Click Print, and the printer prints the selected number of 
pages on one side of each page.
 Mac OS 10.2.x
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							USING YOUR PRINTER WITH A MACINTOSHA.8
Duplex Printing
You can print on both sides of the paper. Before printing in the 
duplex mode, decide on which edge you will be binding your 
finished document. The binding options are:
Which is the conventional layout used in book binding.
Which is the type often used with calendars. 
1From your Macintosh application, select Print from the File 
menu. 
2Select the Duplex. 
(Select the Layout if you are an Mac OS 8.6 or 9.x user.)
3Click Print on Both Sides and select a binding orientation.
4Click Print and the printer prints on both sides of the paper.
 Mac OS 10.2.x
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							USING YOUR PRINTER WITH A MACINTOSHA.9
A
Printing Your Document to a Selected Paper 
Size
This feature allows you to scale your print job to any specified 
physical paper size regardless of the document size. 
1From your Macintosh application, select Print from the File 
menu. 
2Select the Printer Features. (Select the Advanced 
Options if you are an Mac OS 8.6 or 9.x user.)
3Select an option from the Fit to Page drop-down list, and 
click Print. 
•Nearest Size and Scale: The printer automatically 
selects paper nearest the document size and reduces or 
enlarges the page to fit it onto the paper.
•Nearest Size and Crop: The printer automatically selects 
paper nearest to the document size and prints the page in 
actual size. Any overflowing data is cropped to fit the page 
onto the paper.
 Mac OS 10.2.x
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							USING YOUR PRINTER WITH A MACINTOSHA.10
MEMO
Downloaded From ManualsPrinter.com Manuals 
						

							2
This chapter describes how to use the printer’s control 
panel.
This chapter includes:
• Understanding the Control Panel
• Using Control Panel Menus
USING THE CONTROL PANEL
*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals
NOTE: If you are a CLP-550 user, you need to install an 
optional network interface card. For more information, see 
Appendix F, "Installing Printer Options".
USING YOUR PRINTER ON 
A NETWORK
*ownloadedMKromM~anualsPrinter9comM~anuals*ownloadedMKromM~anualsPrinter9comM~anuals 
						

							USING WINDOWS POSTSCRIPT DRIVERB.2
Installing PS Drivers
PPDs, in combination with the PostScript driver, access the 
printer features and allow the computer to communicate with 
the printer. An installation programme for the PPDs is provided 
on the supplied software CD-ROM. 
Before installing, make sure that the printer and the PC are 
properly connected with parallel, USB or network interface. For 
information about:
• connecting with the parallel interface.
• connecting with the USB interface. For Windows 98/Me, the 
USB driver must be installed.
• connecting with a network interface. For a CLP-550, you need 
to install an optional network interface card; see “Installing a 
Network Interface Card” on page F.8.
Installing PS Drivers
1Place the CD-ROM in the CD-ROM drive. Installation will 
start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, type x:\setup.exe in the 
Open box (where x is the drive letter for the CD-ROM drive) 
and click OK.
NOTE: When the following window opens, connect your printer to 
the computer and turn the printer on. Then click Next.
If the printer is already connected and turned on, this screen does 
not appear. Skip to the next step.
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							USING WINDOWS POSTSCRIPT DRIVERB.3
B
2Click Custom Install.
3Click Printer(PostScript) and then click Next.
4When the installation is completed, click Finish. 
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							USING WINDOWS POSTSCRIPT DRIVERB.4
Reinstalling PS Drivers
1From the Start menu, select Programs.
2Select Samsung CLP-550 Series, and then Printer 
Maintenance.
3Click Repair and then click Next. 
4Click Printer(PostScript) and then click Next. 
5When reinstallation is done, click Finish. 
Removing PS Drivers
1From the Start menu, select Programs.
2Select Samsung CLP-550 Series, and then Printer 
Maintenance.
3Check Remove and then click Next. 
4Click Printer(PostScript) and then click Next. 
5When removing is completed, click Finish.
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							USING WINDOWS POSTSCRIPT DRIVERB.5
B
Using PS Printer Driver Features
Certain printer features are not available in this PS driver. For 
details about the features, refer to Chapter 4,“Printing Tasks”.
The printer automatically switches between PS and PCL printer 
languages depending on the driver you have selected.
Accessing Printer Properties
The properties window for the Windows PostScript printer driver 
can be opened from the Printers folder or an application.
To open the properties window from the Printer folder:
1Click the Windows Start button.
2Select Settings then Printers to open the Printers window.
3Select Samsung CLP-550 Series PS. 
4Click the right mouse button on the printer icon and: 
•In Windows 95/98/Me, select Properties.
•In Windows 2000/XP, select Printing Preferences.
•In Windows NT 4.0, select Document Default.
To open the properties window from an application:
1From the File menu, select Print to open the Print window.
2Make sure that Samsung CLP-550 Series PS is selected 
in the Name drop-down list.
3Click Properties to open the properties window.
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 
						

							USING WINDOWS POSTSCRIPT DRIVERB.6
MEMO
Downloaded From ManualsPrinter.com Manuals