Samsung CLP 550N User Manual

SOLVING PROBLEMS7.13
7
4Carefully take the jammed paper out of the printer.
CAUTION: Do not touch the fuser. It is hot and could cause 
burns! The fuser’s operating temperature is 180°C (356°F). Take 
care when removing paper from the printer.
5After making sure that the left cover is open, close the top 
cover. Make sure that it is securely latched.
CAUTION: Do not try to close the left cover with the top cover 
open. This may cause damage to the printer.
The fuser
is hot!...

SOLVING PROBLEMS7.14
6Close the left cover firmly.
7Open and close the right cover to resume printing.
In the Duplex Area
If paper is jammed in the duplex area, ‘Jam In Duplex Path’ 
appears on the display.
1Using the handle, open the right cover.
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 

SOLVING PROBLEMS7.15
7
2Locate the jammed paper, and then pull it out gently and 
slowly to avoid the paper tearing. Go to step 8.
NOTE: If the paper tears, make sure that all of the paper 
fragments are removed from the printer.
If you cannot find the jammed paper or there is any 
resistance removing the paper, go to step 3.
3Using the handle, completely open the left cover until it is at 
right angles to the main frame and the toner cartridges are 
ejected. 
CAUTION: If the left cover is not completely...

SOLVING PROBLEMS7.16
4Press the top cover release button to unlatch the top cover 
and open it all the way.
5Locate the jammed paper, and then carefully take it out of 
the printer.
CAUTION: Do not touch the fuser. It is hot and could cause 
burns! The fuser’s operating temperature is 180°C (356°F). Take 
care when removing paper from the printer.
The fuser
is hot!
*ownloadedMKromM~anualsPrinter9comM~anuals 

SOLVING PROBLEMS7.17
7
6After making sure that the left cover is open, close the top 
cover. Make sure that it is securely latched.
CAUTION: Do not try to close the left cover with the top cover 
open. This may cause damage to the printer.
7Close the left cover firmly.
8Close the right cover. The printer resumes printing.
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 

SOLVING PROBLEMS7.18
In the Optional Tray2
If paper is jammed in the optional tray2, ‘Jam0 In Tray2’ 
appears on the display.
1Using the handle, open the right cover.
2Remove the jammed paper in the direction shown. To avoid 
the paper tearing, pull it out gently and slowly. Go to step 
10. 
If you cannot find the jammed paper in the printer, go to 
step 3. 
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 

SOLVING PROBLEMS7.19
7
3Open the outer jam cover in Tray 2.
4Open the inner cover of Tray 2.
5Pull the jammed paper out in the direction shown. To avoid 
the paper tearing, pull it out gently and slowly. 
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 

SOLVING PROBLEMS7.20
6Close the two jam covers and go to step 10.
If there is any resistance, and paper does not move 
immediately when you pull, stop pulling and continue to 
step 7.
7Pull the optional tray2, out of the printer.
8If you see the jammed paper, remove the paper from the 
printer by gently pulling it straight out.
qownlo#ded2(rom2Q#nu#lsKrinterIcom2Q#nu#ls 

SOLVING PROBLEMS7.21
7
9Slide the tray back into the printer and close the two jam 
covers. 
10Open and close the right cover. The printer resumes 
printing. 
Tips for Avoiding Paper Jams
By selecting the correct paper types, most paper jams can be 
avoided. If a paper jam occurs, follow the steps outlined in 
“Clearing Paper Jams” on page 7.7. 
• Follow the procedures on page 3.4. Ensure that the adjustable 
guides are positioned correctly.
• Do not overload the paper tray. Ensure that the paper is...

SOLVING PROBLEMS7.22
Solving Print Quality Problems
Dirt inside of the printer or improper paper loading may reduce 
the print quality. See the table below for troubleshooting. 
ProblemSolution
Light or faded 
print
If a vertical white streak or faded area appears on the page:
• The toner supply is low. You may be able to temporarily 
extend the toner cartridge life. See “Redistributing the Toner” 
on page 6.5. If this does not improve the print quality, install a 
new toner cartridge of the faded...