Samsung CLP 350N User Manual

4.10   
Setting the paper size and type
The settings you change remain in effect only while you are using the 
current program. To make your changes permanent, make them in the 
machines folder.
Note 
The following procedure is for Windows XP. For other Windows 
OS, refer to the corresponding Windows Users Guide or online 
help.
1Click the Start button on the computer screen.
2Select Printers and Other Hardwares.
3Select Printers and Faxes.
4Right-click on the printer driver icon and select Printing...

5.1   
5 Basic printing
This chapter explains common printing tasks. 
• Printing a document
• Canceling a print job
Printing a document
Your machine allows you to print from various Windows, Macintosh, or 
Linux applications. The exact steps for printing a document may vary 
depending on the application you use.
1Open the document you want to print.
2Select Print from the File menu. The Print window is displayed. It 
may look slightly different depending on your application.
3Select your printer driver...

6.1   
6 Maintenance
This chapter provides information for maintaining your machine and the 
toner cartridge.
This chapter includes:
• Printing a machine configuration report
• Cleaning your machine
• Maintaining the cartridge
• Redistributing toner
• Replacing the toner cartridge
• Replacing the Imaging Unit
• Replacing the Waste Toner Container
• Maintenance Parts
• Managing your machine from the website
Printing a machine configuration report
You can print the machines information and job report.
You...

6.2   
4Extend the top handle on the imaging unit and then use it to pull the 
imaging unit out of the machine completely.
Caution
• Do not touch the green surface on the imaging unit with your 
hands or any other material. Use the handle on it in order to 
avoid touching this area.
• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for 
more than a few minutes. Cover it with a piece of paper to 
protect it if necessary.
5Look inside...

6.3   
Caution
If there is a cracking 
sound, re-install the 
imaging unit. The 
imaging unit is not 
properly installed.
Maintaining the cartridge
Toner cartridge storage
To get the most from the toner cartridge, keep the following guidelines in 
mind:
• Do not remove the toner cartridge from its package until ready for use. 
• Do not refill the toner cartridge. The machine warranty does not 
cover damage caused by using a refilled cartridge.
• Store toner cartridges in the same environment as your...

6.4   
4Grasp the toner cartridge and align it with the corresponding slot 
inside the machine. Insert it back into its slot until it clicks into place, 
and rotate the toner cartridge clockwise. 
Note
If toner gets on your clothing, wipe it off with a dry cloth and 
wash it in cold water. Hot water sets toner into fabric.
5Close the front cover. Make sure that the cover is securely closed.
Replacing the toner cartridge
The machine uses four colors and has a different toner cartridge for each 
one:...

6.5   
6 Remove the cartridge cap.
Note
If toner gets on your clothing, wipe it off with a dry cloth and 
wash it in cold water. Hot water sets toner into fabric.
7 Grasp the toner cartridge and ali gn it with the corresponding slot 
inside the machine. Insert  it back into its slot until it clicks into place, 
and rotate the toner cartridge clockwise. 
8 Close the front cover. Make sure th at the cover is securely latched, 
and then turn the machine on. 
Caution
If the front cover is not completely...

6.6   
4Pull the imaging unit out of the machine using the handle on its 
bottom.
5Extend the top handle on the imaging unit and then use it to pull the 
imaging unit out of the machine completely.
6Take a new imaging unit out of its package. Remove the protective 
devices on both sides of the imaging unit and the paper protecting 
the surface of the imaging unit.Caution
• Don’t use sharp objects, such as a knife or scissors, to open 
the imaging unit package. You could damage the surface of 
the imaging...

6.7   
Caution
If the front cover is not completely closed, the machine will not 
operate. Please make sure all toner cartridges are installed 
properly. If any toner cartridge is installed improperly, the front 
cover do not close.
11Turn the machine on.
Caution
If there is a cracking 
sound, re-install the 
imaging unit. The 
imaging unit is not 
properly installed.
Note
Each LED blinks red in a repeated order. Wait for about 1.5 
minutes for your machine to get ready.
Replacing the Waste Toner...

6.8   
7 Close the front cover firmly. 
Caution
If the front cover is not completely closed, the machine will not 
operate. Please make sure all toner cartridges are installed 
properly. If any toner cartridge is installed improperly, the front 
cover do not close.
8 Turn the machine on.
Maintenance Parts
To avoid print quality and paper feed problems resulting from worn parts, 
and to maintain your machine in top  working condition, the following items 
will need to be replaced after the spec ified...