Samsung CLP 350N User Manual

v
Downloaded From ManualsPrinter.com Manuals 

1.1   
1 Introduction
Congratulations on the purchase of your printer.
This chapter includes:
• Special features
• Machine overview
• Control panel overview
• Understanding the Control Panel
Note
Some features are optional. Please check the specifications 
sections. (See Specifications on page 10.1.)
Special features
Your new machine is equipped with special features.
Print with excellent quality and speed
• You can print in a full range of colors using cyan, 
magenta, yellow, and black.
• You can print...

1.2   
Machine overview
These are the main components of your machine.
• The figure above shows your machine with the available accessories. (See page 8.1 for more information)
• The symbol 
* denotes an optional device.
Note 
• All illustrations on this user’s guide may differ from your machine depending on its options or models.
• The surface of the output tray may become hot if you print a large number of pages at once. Please make sure that you try not to touch the 
surface, and do not allow children...

1.3   
Control panel overview
1
toner colors: Show the status of each toner cartridge. See Status LED with the toner cartridge messages on page 1.4.
2Status: Shows the status of your machine. (See Understanding the Control Panel on page 1.4 for more information.)
3
Stop: Stops an operation at any time and there are more functions. (See Understanding the Control Panel on page 1.4 for more information.)
Downloaded From ManualsPrinter.com Manuals 

1.4   
Understanding the Control Panel
LEDs
The color of the Status and toner colors LED indicates the machines current status.
Note 
All printing errors will be appear in the Smart Panel program window.
Stop button
Status LEDtoner colors LEDDescription
lights green All LEDs off The machine is ready to print.
slowly blinks green All LEDs off The machine is receiving data from the computer.
fast blinks green All LEDs off The machine is printing data.
lights red All LEDs off • The machine is experiencing...

2.1   
2 Software overview
This chapter gives you an overview of the software that comes with your 
machine. Further details on how to use the software are explained in the 
Software section.
This chapter includes:
• Supplied software
• Printer driver features
• System requirements
Supplied software
You must install the machine software using the supplied CDs after you 
have set up your machine and connected it to your computer. 
Each CD provides you with the following software:
CDContents
Printer...

2.2   
PostScript driver 
System requirements
Before you begin, ensure that your system meets the following 
requirements:
Windows
Your machine supports the following Windows operating systems. 
Note 
• Internet Explorer 5.0 or higher is the minimum requirement for 
all Windows operating systems.
• For Windows 2000/XP/2003/Vista, users who have an 
administrator right can install the software.
FeatureWindowsLinuxMacintosh
Color mode O O O
Machine quality option O O O
Poster printing X X X
Multiple pages...

3.1   
3 Getting Started
This chapter gives you step-by-step instructions for setting up the 
machine.
This chapter includes:
• Setting up the hardware
• Setting up the network
• Installing the software
• Altitude adjustment
Setting up the hardware
This section shows the steps to set up the hardware which is explained 
in the Quick Install Guide. Make sure you read Quick Install Guide and 
complete following steps.
1Select a stable location. 
Select a level, stable place with adequate space for air...

3.2   
Supported operating systems
The following table shows the network environments supported by the 
machine: 
ItemRequirements
Network interface 10/100 Base-TX
Network operating 
systemWindows 2000/XP/Vista
Various Linux OS
Macintosh 10.3 ~ 10.5 (CLP-610 series)
Network protocols TCP/IP, DLC/LLC, IPP, SNMP
Dynamic addressing 
serverDHCP, BOOTP
Note
•SyncThru™ Web Admin Service: Web-based printer 
management solution for network administrators. 
SyncThru™ 
Web Admin Service
 provides you with an...

3.3   
Installing the software
You have to install the machine software for printing. The software 
includes drivers, applications, and other user friendly programs. 
Note
• The following procedure is for when you use the machine as 
a network machine. If you want to connect a machine with a 
USB cable, refer to the 
Software section.
• The following procedure is based on the Windows XP 
operating system. The procedure and popup window which 
appears during the installation may differ depending on the...