Runco X 450d Projector User Manual

System Overview
Runco X-400d/X-450d Installation/Operation Manual 15 
PREL
IMINARY
9.MENU
Press this button to access the OSD controls, or to exit the current menu and return 
to the previous one. 
10.Cursor Buttons ( , , , ) 
Use these buttons to select items or settings, adjust settings or switch display 
patterns.
When no menu is present on-screen, the UP and DOWN buttons toggle through the 
available aspect ratios, in this order: 
UP Button = Native - Virtual Cinema - Cinema - VirtualWide - Letterbox...

System Overview
16 Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINAR Y
14.
3D Mode Selection Buttons:
3D AUTO
Press to set the 3D Mode to  Auto. 
3D SBS (Side-by-Side)
Press to set the 3D Mode to  3D Side-by-Side. 
3D TAB (Top-and-Bottom) 
Press to set the 3D Mode to  3D Top-and-Bottom. 
3D FP (Frame Packing) 
Press to set the 3D Mode to  3D Frame Packing.
2.5 
X-400d/X-450d Active 
3D EmitterThe Active 3D Emitter, shown below, receives a left/right synchronization signal from the 
Dimension...

Installation
Runco X-400d/X-450d Installation/Operation Manual 17 
PREL
IMINARY
3.1 
Remote ControlTo install batteries in the remote control: 
1. Press down the tab on the cover and pull the cover in the direction of the arrow. 
2. Insert the included batteries. Ensure that the polarities correctly match the   and   
markings inside the battery compartment. 
3. Insert the lower tab of the cover into the opening, and press down the cover until it 
clicks in place.
Notes on Batteries  Make sure that the...

Installation
18 Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINARY
3.2 
Quick SetupTable 3-1 gives a quick overview of the X-400d/X-450d installation process. The sections 
following this one provide detailed instructions. 
Table 3-1. Installation Overview
Step ProcedureFor Details, Refer 
to page...
1Choose a location for the projector 19
2Install anamorphic lens mounting assembly (optional) 26, 38
3Mount the projector 32
4Mount the Dimension Digital Controller  33
5Connect the Dimension...

Installation
Runco X-400d/X-450d Installation/Operation Manual 19 
PREL
IMINARY
3.3 
Installation 
ConsiderationsProper installation of your projector will ensure the quality of your display. Whether you are 
installing a projector temporarily or permanently, you should take the following into 
account to ensure your projector performs optimally.
Pre-Wiring for 3D: Run 
Dual HDMI Cables It is a common practice in custom audio/video installations to conceal cables by running 
them through walls. 
If you...

Installation
20 Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINARY
Throw DistanceThrow distance is the distance measured from the front of the projector to the screen. 
This is an important calculation in any projector installation as it determines whether or not 
you have enough room to install your projector with a desired screen size and if your 
image will be the right size for your screen.
You can quickly estimate the throw distance by taking the width of the screen and 
multiplying it...

Installation
Runco X-400d/X-450d Installation/Operation Manual 21 
PREL
IMINARY
Table 3-3 lists the available lens options for the X-400d/X-450d and their associated throw 
ratios. 
Vertical and Horizontal 
Position  Proper placement of the projector relative to the screen will yield a rectangular, 
perfectly-centered image that completely fills the screen.
Ideally, the projector should be positioned perpendicular to the screen and in such a way 
that the lens center is aligned with either the top or...

Installation
22 Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINARY
Figure 3-2. Projector Placement
Vertical and Horizontal
Lens ShiftYou can use the lens shift controls to center the image on the screen. Lens shift is 
generally expressed as a percentage of the screen height or width, as shown in Figure 3-3 
and Figure 3-4.
Figure 3-3. Vertical Lens Shift (EXAMPLE ONLY)
Screen Height
Projection DistanceCeiling
x
Lens Center Lens Center
Ceiling Installation
Screen
Height 
Floor Lens Center...

Installation
Runco X-400d/X-450d Installation/Operation Manual 23 
PREL
IMINARY
Figure 3-4. Horizontal Lens Shift (EXAMPLE ONLY)
Vertical Lens Shift: The X-400d/X-450d zoom lenses (Proteus 2 through 6) provide up 
to 65% of vertical lens shift in either direction (up or down). For example, with a 96 x 
54-inch (16:9) screen, you can shift the image up to 35.10 inches (0.89 meters) below the 
screen center. (Vertical lens shift is not possible with the Proteus 1 lens.)
Horizontal Lens Shift: The...

Installation
24 Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINARY
Folded OpticsIn rear-screen applications where space behind the projector is limited, a mirror may be 
used to fold the optical path, as shown in Figure 3-5. The position of the projector and 
mirror must be accurately set. If you are considering this type of installation, contact your 
dealer for assistance.
Figure 3-5. Folded Optics➤
For best performance, always use “first-surface” mirrors in your 
rear-projection...