Runco Vx 2000d Projector User Manual

Installation
Runco VX-2000d Owner’s Operating Manual 19 
PREL
IMINARY
3.2 
Quick Setup
Table 3-1 gives a quick overview of the VX-2000d installation process. The sections 
following this one provide detailed instructions. 
 
Installation should be performed by a qualified custom video 
installation specialist.
Table 3-1. Installation Overview 
StepProcedureFor Details, Refer to 
page...
1Choose a location for the projector20
2Connect the DHD Controller to the projector25
3Connect signal sources to the...

Installation
20 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
3.3 
Installation 
Considerations
Proper installation of your projector will ensure the quality of your display. Whether you are 
installing a projector temporarily or permanently, you should take the following into 
account to ensure your projector performs optimally.
Installation TypeChoose the installation type that best suits your needs: front or rear screen, floor mount or 
inverted mount. 
Table 3-2 compares these various...

Installation
Runco VX-2000d Owner’s Operating Manual 21 
PREL
IMINARY
Throw DistanceThrow distance is the distance measured from the front of the projector to the screen. 
This is an important calculation in any projector installation as it determines whether or not 
you have enough room to install your projector with a desired screen size and if your 
image will be the right size for your screen.
You can quickly estimate the throw distance by taking the width of the screen and 
multiplying it by the...

Installation
22 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
Vertical and Horizontal 
Position
Proper placement of the projector relative to the screen will yield a rectangular, 
perfectly-centered image that completely fills the screen.
Ideally, the projector should be positioned perpendicular to the screen and in such a way 
that the lens center and screen center are aligned with each other, as shown in 
Figure 3-3.
Figure 3-3. Projector Placement
Vertical Lens ShiftIf it is not possible to...

Installation
Runco VX-2000d Owner’s Operating Manual 23 
PREL
IMINARY
The VX-2000d provides up to 50% of vertical lens shift in either direction. For 
example, with a 96 x 54-inch (16:9) screen, you can shift the image up to 27.00 inches 
(0.69
 meters) above or below the screen center.
Folded OpticsIn rear screen applications where space behind the projector is limited, a mirror may be 
used to fold the optical path, as shown in 
Figure 3-5. The position of the projector and 
mirror must be accurately...

Installation
24 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
3.4 
Mounting the 
VX-2000d
There are several methods for mounting the projector. Depending on your chosen 
installation, one method may be more suitable than another. 
Floor Mounting (Upright)In typical front and rear screen installations, the projector can be mounted to a secure and 
level surface such as a table or cart. Carts are useful when moving a projector during a 
presentation or from site to site. If possible, lock the wheels...

Installation
Runco VX-2000d Owner’s Operating Manual 25 
PREL
IMINARY
3.5 
Connections to the 
VX-2000d and DHD 
Controller 
Proceed as follows to connect the DHD Controller to the VX-2000d, your video sources, 
external controller(s) – if present – and AC power.
When connecting your equipment:
 Turn off all equipment before making any connections.
 Use the correct signal cables for each source.
 Ensure that the cables are securely connected. Tighten the thumbscrews on 
connectors that have them....

Installation
26 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
Connecting Source 
Components to the DHD 
Controller 
Connect your video sources to the DHD Controller as shown and described in the 
sections that follow. 
HDMI Connections: See Figure 3-7. 
Figure 3-7. HDMI Source Connections
➤
Use the HDMI inputs whenever possible. This ensures the highest 
video quality because the signal is carried in the digital domain 
throughout the entire signal path, from source component output 
into the...

Installation
Runco VX-2000d Owner’s Operating Manual 27 
PREL
IMINARY
Digital (DTV) RGB or Component Video Connections: See Figure 3-8. 
Figure 3-8. Digital (DTV) RGB or Component Video Connections
HD1
HD2
G/YINPUTS
HV R/Pr B/PbG/Y H V R/Pr B/Pb
Component Video Pb
Pr YVideo
S-Video 2 S-Video 1 12 3TRIGGERS
HDMI 1 HDMI 2
DTV or Progressive
Component (YPbPr)
Source
Red/Pr Green/Y  Blue/Pb  Horiz  Vert 

Installation
28 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
Analog (Computer) RGB Connections: See Figure 3-9. 
Figure 3-9. Analog RGB Connections
HD1
HD2
G/YINPUTS
HV R/Pr B/PbG/Y H V R/Pr B/Pb
Component Video Pb PrY Video S-Video 2S-Video 1 12 3TRIGGERS
HDMI 1 HDMI 2
Personal Computer
Red Green Blue Horiz  Vert