Runco Vx 2000d Projector User Manual

Controls and Functions
Runco VX-2000d Owner’s Operating Manual 9 
PREL
IMINARY
7.ENTER BUTTON 
Press ENTER to select a highlighted menu item.
8.DOWN BUTTON 
Used to direct select aspect ratios or move the menu cursor down in the OSD. When 
no menu is present on-screen, this button toggles through the different aspect ratios, 
in this order: 
 
Virtualwide 2.35 - Cinema - VirtualWide - Letterbox - Standard (4:3) - Anamorphic
9.RIGHT BUTTON 
Used to direct select inputs or move the menu cursor right in the...

Controls and Functions
10 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
2.4 
DHD Controller Rear 
Panel
Figure 2-4 shows the rear connector panel on the DHD Controller.
Figure 2-4. DHD Controller Rear Panel
Outputs1.HDMI OUT 
Connect this to the HDMI Input on the VX-2000d (see Figure 2-2). 
Inputs2.HDMI 1 / HDMI 2 (Digital) 
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner 
with a DVI or HDMI output.
3.HD1 / HD2 (5 x Analog BNCs) 
Two inputs (five BNCs per input)...

Controls and Functions
Runco VX-2000d Owner’s Operating Manual 11 
PREL
IMINARY
5.COMPOSITE VIDEO INPUT 
Standard composite video input for connecting a VCR, laser disc player or other 
composite video source.
6.S-VIDEO 1 / S-VIDEO 2 
Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super 
VHS (S-VHS) VCR. 
7.12-VOLT (750 mA) TRIGGER OUTPUTS  
Connection for up to three (3), 12-volt trigger-controlled devices such as retractable 
screens or screen masks. 
8.ComLink (RS-232)...

Controls and Functions
12 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
2.5 
VX-2000d Remote 
Control Unit 
Figure 2-5 shows the VX-2000d remote control, and the paragraphs that follow describe 
its functionality.
Figure 2-5. DHD Controller/VX-2000d Remote Control
1212
3
6
8
9 1110
135
7 4 

Controls and Functions
Runco VX-2000d Owner’s Operating Manual 13 
PREL
IMINARY
1.IR OUTPUT INDICATOR 
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2.ON / OFF 
Press to turn the projector on or off.
3.ENTER 
Press to select a highlighted menu item or confirm a changed setting.
4.Cursor Buttons (, , , )  
Use these buttons to select items or settings, adjust settings or switch display 
patterns.
 
 
When no menu is present on-screen, the UP and DOWN buttons toggle...

Controls and Functions
14 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
9.Aspect Ratio Selection Buttons 
Use the red buttons to select an aspect ratio directly or to enter numeric characters, 
as follows: 
 
 
ANA (Anamorphic) (3)  
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.  
 
4X3 (Standard 4:3) (6)  
Scales the input signal to fit 4:3 display mode in the center of the screen.  
 
LETBOX (Letterbox) (9) 
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9...

Controls and Functions
Runco VX-2000d Owner’s Operating Manual 15 
PREL
IMINARY
2.6 
VX-2000d Built-In 
Keypad
The VX-2000d has a built-in keypad that you can use to access the menu system for 
working with digital 1080i or 1080p sources. 
Figure 2-6 shows the VX-2000d built-in 
keypad; the paragraphs that follow describe its use.
Figure 2-6. VX-2000d Built-In Keypad
1.RETURN 
Press RETURN to exit the current menu or cancel an operation. 
2.ENTER 
Press ENTER to confirm a menu item selection. 
3.DOWN /...

Controls and Functions
16 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
Notes: 

Runco VX-2000d Owner’s Operating Manual 17 
PREL
IMINARY
3.1 
Remote Control
Battery InstallationTo install batteries in the remote control: 
1. Remove the battery cover from the back of 
the remote control.
 
 
 
2. Insert the batteries included with the remote 
control. Ensure that the polarities correctly 
match the 
 and  markings inside the 
battery compartment. 
 
3. Replace the battery cover.  
 
Notes on Remote Control 
Operation
The remote control can be used to control the VX-2000d within the...

Installation
18 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
 Do not drop the remote control or expose it to moisture or high temperature.
 The remote control may malfunction under a fluorescent lamp. If that occurs, move the 
DHD Controller away from the fluorescent lamp.
 Make sure that there is nothing obstructing the infrared beam between the remote 
control and the IR receiver on the DHD Controller or projector.
 If the effective range of the remote control decreases, or it stops working,...