Runco Vx 2000d Projector User Manual

Runco VX-2000d Owner’s Operating Manual xi 
1List of Figures
PREL
IMINARY
2-1. VX-2000d Front/Top/Side/Bottom/Rear View ............................................................... 5
2-2. VX-2000d Rear Panel ................................................................................................... 7
2-3. DHD Controller Front Panel .......................................................................................... 8
2-4. DHD Controller Rear Panel...

List of Figures
xii Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
Notes: 

Runco VX-2000d Owner’s Operating Manual 1 
PREL
IMINARY
1.1 
About This Manual
This Owner’s Manual describes how to install, set up and operate the Runco VX-2000d 
DLP Projector and DHD Controller. 
Throughout this manual, the Runco VX-2000d DLP Projector and DHD Controller are 
referred to collectively as the “VX-2000d.” 
Target AudienceRunco has prepared this manual to help home theater installers and end users get the 
most out of the VX-2000d. 
Runco has made every effort to ensure that this manual...

Introduction
2 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
Graphic Conventions: These symbols appear in numerous places throughout the 
manual, to emphasize points that you must keep in mind to avoid problems with your 
equipment or injury: 
1.2 
Using This Manual
Use the following table to locate the specific information you need in this manual. 
TIPS highlight time-saving short cuts and helpful guidelines for using 
certain features. 
NOTES emphasize text with unusual importance or special...

Introduction
Runco VX-2000d Owner’s Operating Manual 3 
PREL
IMINARY
1.3 
Description, Features 
and Benefits
The Runco VX-2000d DLP Projector and DHD Controller retains all of the features and 
performance of the VX-1000d – our most popular projector ever – while incorporating 
new, cutting edge technology and 1080p performance. Its performance is so impressive, 
in fact, that the VX-2000d has earned its place in our exclusive, Video Xtreme™ family of 
products – our top of the line and the world’s...

Introduction
4 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
Key Features and BenefitsThe VX-2000d offers these key features and benefits: 
 Runco-engineered, Enhanced GEN 3 Technology™ with RVR
 Native Resolution: 1920 x 1080 (16:9 Native Aspect Ratio) 
 Two HDMI Inputs (on DHD Controller) with High-bandwidth Digital Content Protection 
(HDCP)
 HDTV Compatible 
Parts ListYour VX-2000d is shipped with the following items. If any items are missing or damaged, 
please contact your Runco dealer or...

Runco VX-2000d Owner’s Operating Manual 5 
PREL
IMINARY
2.1 
VX-2000d at a Glance
Figure 2-1 shows the key VX-2000d components. 
Figure 2-1. VX-2000d Front/Top/Side/Bottom/Rear View
2. Controls and Functions
6
104
4 5 6 978
112
3
1
912 

Controls and Functions
6 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
1.VERTICAL LENS SHIFT 
Using a 9/64” hex wrench, turn this to move the lens up or down. 
2.POWER LED 
Lights red to indicate that the projector is in standby; flashes blue during warm-up or 
cool-down or lights blue to indicate normal operation. 
3.TEMP LED 
Lights red to indicate that the projector has overheated and shut down. 
4.INTAKE VENTS 
Cool air enters the projector through these vents. To prevent overheating, ensure...

Controls and Functions
Runco VX-2000d Owner’s Operating Manual 7 
PREL
IMINARY
2.2 
VX-2000d Rear Panel
Figure 2-2 shows the VX-2000d rear panel. 
Figure 2-2. VX-2000d Rear Panel
1.POWER INPUT (100 to 240 VAC) 
Connect the VX-2000d to power here.
2.HDMI INPUT 
An HDCP-compliant, digital video input for connecting the HDMI output from the DHD 
Controller.
3.BUILT-IN KEYPAD 
Used to navigate the VX-2000d on-screen menus. Refer to VX-2000d Built-In 
Keypad on page 15 for more information. 
4.12-VOLT (200...

Controls and Functions
8 Runco VX-2000d Owner’s Operating Manual
PREL
IMINARY
2.3 
DHD Controller Front 
Panel
Figure 2-3 shows the controls and indicators on the DHD Controller front panel; the 
paragraphs that follow describe them. 
Figure 2-3. DHD Controller Front Panel
1.RUNCO ICON 
Lights red to indicate that the DHD Controller is in standby mode; lights blue to 
indicate that the unit is on. 
2.POWER BUTTON 
Press once to toggle from standby mode to on mode. Press it again to return to 
standby...