Runco Sc 1 Projector User Manual

Runco SC-1 Owner’s Operating Manual xi 
1List of Figures
PREL
IMINARY
2-1. SC-1 Top/Rear/Front/Side View (with Built-In Power Supply/Ballast) ............................ 5
2-2. SC-1 Input Panel ..........................................................................................................7
2-3. SC-1 Control Panel ...................................................................................................... 9
2-4. DHD Controller Front Panel...

List of Figures
xii Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
3-27. Anamorphic Lens Mouning Assembly - Exploded View............................................. 49
3-28. Attaching the Anamorphic Lens to the Lens Ring ..................................................... 50
3-29. TheaterMaster Remote Control for SC-1 .................................................................. 55
3-30. Channel Setup Menu...

Runco SC-1 Owner’s Operating Manual 1 
PREL
IMINARY
1.1 
About This Manual
This Owner’s Manual describes how to install, set up and operate the Runco Signature 
Cinema™ SC-1 DLP Projector and DHD Controller.
Throughout this manual, the Runco Signature Cinema™ SC-1 DLP Projector and DHD 
Controller are referred to collectively as the “SC-1.” 
Target AudienceRunco has prepared this manual to help home theater installers and end users get the 
most out of the SC-1. 
Runco has made every effort to ensure...

Introduction
2 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
Graphic Conventions: These symbols appear in numerous places throughout the 
manual, to emphasize points that you must keep in mind to avoid problems with your 
equipment or injury: 
1.2 
Using This Manual
Use the following table to locate the specific information you need in this manual. 
TIPS highlight time-saving short cuts and helpful guidelines for using 
certain features. 
NOTES emphasize text with unusual importance or special...

Introduction
Runco SC-1 Owner’s Operating Manual 3 
PREL
IMINARY
1.3 
Description, Features 
and Benefits
When you select a Signature Cinema projector as the centerpiece of your home cinema, 
Runco becomes your partner in achieving the most extraordinary entertainment 
experience. As part of this personalized approach, Runco has engineered the SC-1 with a 
variety of setup tools allowing installation professionals to customize this projector for your 
unique home.
The SC-1 uses the exclusive Signature...

Introduction
4 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
Key Features and BenefitsThe SC-1 offers these key features and benefits: 
 Native Resolution: 2048 x 1080
 Three-chip Digital Light Processing (DLP™) system 
 Two HDMI Inputs (on DHD Controller) with High-bandwidth Digital Content Protection 
(HDCP)
 HDTV Compatible
Signature lens options for stunning sharpness and throw distance flexibility
 Internal electromechanical shutter for quick picture mute and black stand-by
 Inverse telecine...

Runco SC-1 Owner’s Operating Manual 5 
PREL
IMINARY
2.1 
SC-1 at a Glance
Figure 2-1 shows the key SC-1 components. The paragraphs that follow describe them. 
Figure 2-1. SC-1 Top/Rear/Front/Side View (with Built-In Power Supply/Ballast)
2. Controls and Functions
12
3
5
6
7
8
9
10
11
12
141315
4 

Controls and Functions
6 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
1.DOOR RELEASE 
To access SC-1 internal components, press this button to release the hinged door on 
the top of the projector. After closing the door, press the button again to latch it. 
2.STAT US / CONTROL PANEL 
For a detailed description, refer to SC-1 Control Panel on page 9. 
3.EXHAUST DUCT 
Connect the projector’s 8” top exhaust hole to a rigid duct. Add a 50/60-Hz heat 
extractor at the opposite end of the duct so that...

Controls and Functions
Runco SC-1 Owner’s Operating Manual 7 
PREL
IMINARY
2.2 
SC-1 Input Panel
Figure 2-2 shows the SC-1 rear input panel. 
Figure 2-2. SC-1 Input Panel
9
3
2
4
7
5
1
8
6
11
10 

Controls and Functions
8 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
1.INPUT 1 (RGBHV)  
Not used. Connect all video sources to the DHD Controller.
2.INPUT 2 (DVI)  
HDCP-compliant digital video input. Connect the HDMI output from the DHD 
Controller to this input. 
3.INPUT 3 (Video) / INPUT 4 (S-Video)  
Not used. Connect all video sources to the DHD Controller. 
4.ETHERNET  
Reserved for future use. 
5.REMOTE  
Wired input from an external remote control or infrared receiver.
6.GPIO  
Not used....