Runco Sc 1 Projector User Manual

Controls and Functions
Runco SC-1 Owner’s Operating Manual 9 
PREL
IMINARY
2.3 
SC-1 Control Panel
The SC-1 control panel includes an IR sensor, two-digit error code window, LCD status 
display and built-in keypad. The built-in keypad provides access to all software controls 
needed for working with the projector. (For more convenient functionality, use a remote 
control or serial commands via the DHD Controller.) 
Figure 2-3 shows the SC-1 control panel. 
Figure 2-3. SC-1 Control Panel
1.LCD STAT US...

Controls and Functions
10 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
7.IR SENSOR  
Receives IR commands from the TheaterMaster remote control. 
8.INPUT 2 (DVI)  
Press this button to select projector Input 2 (HDMI output from the DHD Controller). 
9.Menu Navigation Buttons:  
 
UP BUTTON ()  
Used to move the menu cursor up in the SC-1 menu system. 
 
LEFT BUTTON ()  
Used to move the menu cursor left in the SC-1 menu system. 
 
DOWN BUTTON () 
Used to move the menu cursor down in the SC-1 menu...

Controls and Functions
Runco SC-1 Owner’s Operating Manual 11 
PREL
IMINARY
2.4 
DHD Controller Front 
Panel
Figure 2-4 shows the controls and indicators on the DHD Controller front panel; the 
paragraphs that follow describe them. 
Figure 2-4. DHD Controller Front Panel
1.RUNCO ICON 
Lights red to indicate that the DHD Controller is in standby mode; lights blue to 
indicate that the unit is on. 
2.POWER BUTTON 
Press once to toggle from standby mode to on mode. Press it again to return to 
standby mode....

Controls and Functions
12 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
7.ENTER BUTTON 
When an item is highlighted on the OSD, the ENTER button selects the item.
8.DOWN BUTTON 
Use to direct select aspect ratios or move the menu cursor down in the OSD. When 
no menu is present on-screen, this button toggles through the different aspect ratios, 
in this order: 
 
Virtual Cinema - Cinema - VirtualWide - Letterbox - Standard (4:3) - Anamorphic
9.RIGHT BUTTON 
Used to direct select inputs or move the...

Controls and Functions
Runco SC-1 Owner’s Operating Manual 13 
PREL
IMINARY
3.HD1 / HD2 (5 x Analog BNCs) 
Two inputs (five BNCs per input) for connecting either RGB or component 
high-definition television signals. The DHD Controller automatically detects the signal 
format: RGB(HV) or YPrPb, 480p, 720p, 480i, 576i or 1080i.
4.COMPONENT VIDEO (RCA connectors) 
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for 
component video from sources such as DVD players.
5.COMPOSITE...

Controls and Functions
14 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
2.6 
SC-1 Remote Control 
Unit 
Figure 2-6 shows the SC-1 remote control, and the paragraphs that follow describe its 
functionality.
Figure 2-6. DHD Controller/SC-1 Remote Control
1212
3
6
8
9 1110
135
7 4 

Controls and Functions
Runco SC-1 Owner’s Operating Manual 15 
PREL
IMINARY
1.IR OUTPUT INDICATOR 
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2.ON / OFF 
Press to turn the projector on or off.
3.ENTER 
Press to select a highlighted menu item or confirm a changed setting.
4.Cursor Buttons (, , , )  
Use these buttons to select items or settings, adjust settings or switch display 
patterns.
 
 
When no menu is present on-screen, the UP and DOWN buttons toggle...

Controls and Functions
16 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
9.Aspect Ratio Selection Buttons 
Use the red buttons to select an aspect ratio directly or to enter numeric characters, 
as follows: 
 
 
ANA (16:9) (3)  
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.  
 
4X3 (4:3) (6)  
Scales the input signal to fit 4:3 display mode in the center of the screen.  
 
LETBOX (Letterbox) (9) 
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.  
 
V-WIDE...

Runco SC-1 Owner’s Operating Manual 17 
PREL
IMINARY
3.1 
Remote Control
To install batteries in the remote control, 
press up on the battery cover retainer clip 
and lift off the cover. Install the two AAA 
batteries with the correct polarity and then 
replace the cover. 
Notes on Batteries Make sure that the battery polarities are correct when installing the batteries.
 Do not mix an old battery with a new one or different types of batteries.
 If you will not use the remote control for a long time,...

Installation
18 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
3.2 
Quick Setup
Table 3-1 gives a quick overview of the SC-1 installation process. The sections following 
this one provide detailed instructions. 
 
Installation should be performed by a qualified custom video 
installation specialist.
Table 3-1. Installation Overview 
StepProcedureFor Details, Refer to 
page...
1Choose a location for the projector19
2Install primary projection lens, lamp and heat extractor24
3Install CineWide lens...