Runco Sc 1 Projector User Manual

							Runco SC-1 Owner’s Operating Manual xi 
1List of Figures
PREL
IMINARY
2-1. SC-1 Top/Rear/Front/Side View (with Built-In Power Supply/Ballast) ............................ 5
2-2. SC-1 Input Panel ..........................................................................................................7
2-3. SC-1 Control Panel ...................................................................................................... 9
2-4. DHD Controller Front Panel ........................................................................................ 11
2-5. DHD Controller Rear Panel ......................................................................................... 12
2-6. DHD Controller/SC-1 Remote Control ........................................................................ 14
3-1. Estimating Throw Distance ......................................................................................... 20
3-2. Projector Placement ................................................................................................... 22
3-3. Vertical Lens Shift (Example only) ............................................................................... 22
3-4. Horizontal Lens Shift (Example only) ........................................................................... 23
3-5. Installing the Primary Lens .......................................................................................... 25
3-6. Accessing the Lamp Cooling Compartment ............................................................... 26
3-7. Lamp Cradle Adjustment ............................................................................................ 27
3-8. Extractor Fan Configurations ...................................................................................... 29
3-9. Adjusting the Feet ...................................................................................................... 29
3-10. AutoScope Lens Motor with Extension Bracket ........................................................ 30
3-11. SC-1 with AutoScope Lens Motor (Bottom View) ..................................................... 30
3-12. Tilt Ranges (Front-to-Back and Side-to-Side) ........................................................... 31
3-13. Connecting the SC-1 to the DHD Controller ............................................................. 33
3-14. HDMI Source Connections ....................................................................................... 34
3-15. Digital (DTV) RGB or Component Video Connections ............................................... 35
3-16. Analog RGB Connections......................................................................................... 36
3-17. Composite, S-Video and Component Video Connections......................................... 37
3-18. RS-232 Control System Connection ......................................................................... 38
3-19. Connecting 12-volt Trigger Outputs.......................................................................... 39
3-20. External IR Receiver Connection............................................................................... 39
3-21. External Power Supply/Ballast Connection ............................................................... 40
3-22. SC-1 Lamp Igniter Connection Panel........................................................................ 41
3-23. AC/Lamp Control Input Panel ................................................................................... 42
3-24. Checking or Setting Lamp Size ................................................................................ 44
3-25. Using LampLOC to Align the Lamp .......................................................................... 46
3-26. Horizontal and Vertical Lens Shift Controls ............................................................... 48 
						

							List of Figures
xii Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
3-27. Anamorphic Lens Mouning Assembly - Exploded View............................................. 49
3-28. Attaching the Anamorphic Lens to the Lens Ring ..................................................... 50
3-29. TheaterMaster Remote Control for SC-1 .................................................................. 55
3-30. Channel Setup Menu ................................................................................................ 58
3-31. Unlocking a Channel ................................................................................................ 59
3-32. Resize Presets: No Resizing ..................................................................................... 60
3-33. Adjusting Black Levels and White Levels Using the Peak Detector............................ 65
4-1. DHD Controller OSD Menu Structure for SC-1 ........................................................... 70
4-2. Typical PLUGE Pattern for Adjusting Brightness ......................................................... 75
4-3. Typical Gray Bar Pattern for Adjusting Contrast .......................................................... 76
4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint................................ 76
4-5. Typical Test Pattern for Adjusting Sharpness .............................................................. 78
4-6. Keystone Correction ................................................................................................... 83
5-1. Disconnecting the Old Lamp ...................................................................................... 92
5-2. Installing A New Lamp ................................................................................................ 93
5-3. Securing Lamp Anode (+) and Cathode (-) Connectors............................................... 93
5-4. Recording the Serial Number of a New Lamp ............................................................. 94
7-1. SC-1 Dimensions (with Built-In Power Supply/Lamp Ballast)..................................... 110
7-2. SC-1 Dimensions (without Built-In Power Supply/Lamp Ballast)................................ 111 
						

							Runco SC-1 Owner’s Operating Manual 1 
PREL
IMINARY
1.1 
About This Manual
This Owner’s Manual describes how to install, set up and operate the Runco Signature 
Cinema™ SC-1 DLP Projector and DHD Controller.
Throughout this manual, the Runco Signature Cinema™ SC-1 DLP Projector and DHD 
Controller are referred to collectively as the “SC-1.” 
Target AudienceRunco has prepared this manual to help home theater installers and end users get the 
most out of the SC-1. 
Runco has made every effort to ensure that this manual is accurate as of the date it was 
printed. However, because of ongoing product improvements and customer feedback, it 
may require updating from time to time. You can always find the latest version of this and 
other Runco product manuals on-line, at www.runco.com. 
If You Have Comments 
About This Manual...
Runco welcomes your comments about this manual. Send them to [email protected].
Textual and Graphic 
Conventions
Text Conventions: The following conventions are used in this manual, in order to clarify 
the information and instructions provided:
 Remote and built-in keypad button identifiers are set in upper-case bold type; for 
example, “Press EXIT to return to the previous menu.”
 Computer input (commands you type) and output (responses that appear on-screen) is 
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to 
Letterbox, type LETTERBOX .” 
 All keys with functional names are initial-capped, set in bold type and enclosed in angle 
brackets. These keys are the following: , , , 
 and .
 indicates that you may press either the RETURN or ENTER key on your 
keyboard if it has both keys.
In addition to these conventions, underlining, boldface and/or italics are occasionally used 
to highlight important information, as in this example:
1. Introduction
The SC-1 requires a dedicated, 220-VAC/30A circuit. Connect 
only the SC-1 to this circuit. 
Caution 
						

							Introduction
2 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
Graphic Conventions: These symbols appear in numerous places throughout the 
manual, to emphasize points that you must keep in mind to avoid problems with your 
equipment or injury: 
1.2 
Using This Manual
Use the following table to locate the specific information you need in this manual. 
TIPS highlight time-saving short cuts and helpful guidelines for using 
certain features. 
NOTES emphasize text with unusual importance or special 
significance. They also provide supplemental information. 
CAUTIONS alert users that a given action or omitted action can 
degrade performance or cause a malfunction.
WARNINGS appear when a given action or omitted action can result 
in damage to the equipment, or possible non-fatal injury to the user. 
DANGER appears when a given action can cause severe injury or 
death. 
Tip
Note
Caution
WARNING
DANGER!
If you need...... Turn to page:
Information about obtaining serviceiv
General information about the Signature Cinema™ SC-1 DLP Pro-
jector and DHD Controller
3
Installation instructions17
First-time configuration instructions 46
Advanced configuration instructions80
Troubleshooting tips96
Product specifications107 
						

							Introduction
Runco SC-1 Owner’s Operating Manual 3 
PREL
IMINARY
1.3 
Description, Features 
and Benefits
When you select a Signature Cinema projector as the centerpiece of your home cinema, 
Runco becomes your partner in achieving the most extraordinary entertainment 
experience. As part of this personalized approach, Runco has engineered the SC-1 with a 
variety of setup tools allowing installation professionals to customize this projector for your 
unique home.
The SC-1 uses the exclusive Signature CineStep Process™ to produce exceptionally 
deep black levels, dynamic contrast and detail, and eliminate undesirable RGB 
characteristics associated with digital projection. With seven lens choices as well as 
anamorphic lens options, the Signature Cinema SC-1 can be tailored for use in any home. 
Its tremendous light output is suitable for screens as wide as 40 feet, while the system’s 
digital controller eliminates any video artifacts while faithfully processing input signals.
The SC-1 incorporates today’s most advanced widescreen DLP™ technology, with three 
SuperOnyx™ DMDs™ boasting a phenomenal native resolution of 2048 x 1080. Runco 
has engineered Imaging Science Foundation™ calibration standards into the SC-1 for the 
purest video performance, and has incorporated horizontal and vertical lens shift controls 
to resolve even the most difficult projector placement issues.
The SC-1 is supplied with Runco’s next-generation, Digital High Definition (DHD) 
Controller, featuring advanced Vivix II™ processing. The DHD Controller produces 
stunning video imagery, elevating even standard NTSC material to near high-definition 
levels.
Multiple aspect ratio control includes Runco’s VirtualWide™ for viewing 4:3 material in 
widescreen with no loss of picture quality. The DHD provides for a pure digital signal path 
from input to output, making this system ready for Runco’s exclusive LiveLink™ DVI cable 
solution to preserve HD signal quality over long runs.
For uncompromising widescreen reproduction of movies originally filmed in the “scope” 
(2.35:1) format, the SC-1 can be equipped with Runco’s patent-pending CineWide™ 
technology, a combination of software, electronics and high-quality anamorphic optics. 
CineWide maintains constant vertical height on the screen just as in a movie theater. 
When a viewer transitions from 1.78:1 (16:9) program material to 2.35:1, the image simply 
gets wider while full height is maintained. Also available with the SC-1 is CineWide with 
AutoScope™, an enhanced, remote-controlled motorized version of CineWide.
Discrete IR and RS-232 control make custom installation seamless, while discrete source 
and aspect ratio selection accommodate any automation control system. 
CineWide requires the use of a 2.35:1 or similar aspect ratio superwide 
format screen.Note 
						

							Introduction
4 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
Key Features and BenefitsThe SC-1 offers these key features and benefits: 
 Native Resolution: 2048 x 1080
 Three-chip Digital Light Processing (DLP™) system 
 Two HDMI Inputs (on DHD Controller) with High-bandwidth Digital Content Protection 
(HDCP)
 HDTV Compatible
Signature lens options for stunning sharpness and throw distance flexibility
 Internal electromechanical shutter for quick picture mute and black stand-by
 Inverse telecine deinterlacing of film-originated, standard and high-definition interlaced 
material with 3:2 pull-down (60 fps) or 2:2 pull-down (50 fps) 
 Auto-setup with seamless cut-and-fade source switching
 Control via built-in keypad, infrared (IR) remote or serial commands via RS-232
 LED for 2-digit error codes, plus LCD for text-based status display
 Incoming AC voltmeter
Parts ListYour SC-1 is shipped with the following items. If any items are missing or damaged, 
please contact your Runco dealer or Runco Customer Service at (800) 23-RUNCO. 
 Signature Cinema™ SC-1 DLP Projector and DHD Controller
 Remote Control Unit and two (2), AAA-size batteries
 TheaterMaster Remote Control Unit and four (4), AAA-size batteries
 Power Cords: 110-VAC (for DHD Controller) and 220-VAC (for projector)
 RJ-11 Telephone Cable, 50 feet (15.24 meters)
 Serial Port Adapter, RJ-11 Female to DB-9 Male 
 Rack-mounting brackets and hardware for the DHD Controller
 Warranty information and registration card
 Runco SC-1 Owner’s Operating Manual (this document) 
Optional Accessories: 
 CineWide™ technology (fixed, secondary anamorphic lens)
 CineWide™ with AutoScope™ system (secondary anamorphic lens and motorized 
mount)
 External Power Supply and Lamp Ballast
➤
➤ 
						

							Runco SC-1 Owner’s Operating Manual 5 
PREL
IMINARY
2.1 
SC-1 at a Glance
Figure 2-1 shows the key SC-1 components. The paragraphs that follow describe them. 
Figure 2-1. SC-1 Top/Rear/Front/Side View (with Built-In Power Supply/Ballast)
2. Controls and Functions
12
3
5
6
7
8
9
10
11
12
141315
4 
						

							Controls and Functions
6 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
1.DOOR RELEASE 
To access SC-1 internal components, press this button to release the hinged door on 
the top of the projector. After closing the door, press the button again to latch it. 
2.STAT US / CONTROL PANEL 
For a detailed description, refer to SC-1 Control Panel on page 9. 
3.EXHAUST DUCT 
Connect the projector’s 8” top exhaust hole to a rigid duct. Add a 50/60-Hz heat 
extractor at the opposite end of the duct so that adequate airflow (at least 600 cubic 
feet per minute) is maintained near the top of the projector. The vane switch in this 
vent will prevent start-up and/or trigger a shutdown if airflow is inadequate. 
4.HORIZONTAL OFFSET KNOB ACCESS  
This opening provides access to the horizontal offset knob, for adjusting the projected 
image position left or right relative to the lens center. (Use a 4.0-mm hex wrench.)
5.INPUT PANEL (remove cover to access) 
Connect the DHD Controller to the projector here; refer to Connecting the DHD 
Controller to the SC-1 on page 32. 
6.AC INPUT 
Connects the projection head to the main power supply/lamp ballast. 
7.BALLAST CONTROL CONNECTOR (9-pin, D-sub male) 
Connects the RS-232 control signals between the ballast and the projection head, 
enabling the projection head to dictate the amount of current (or power) to be 
supplied from the ballast to the projection head.
8.BALLAST SAFETY INTERLOCK CONNECTOR (9-pin, D-sub female)  
Connects the RS-232 safety interlock signals and the Lamp Enable signal between 
the ballast and the projection head. 
9.POWER SUPPLY/LAMP BALLAST 
Provides power to the projector lamp and other projector components. Normally 
mounted at the rear of the projection head, but can also be detached. 
10.220-VAC LINE CORD  
Use this to connect the SC-1 to your AC power source.  
11.LAMP/AIR FILTER COVER  
Remove this cover to access the lamp compartment and air filter.
12.AIR FILTER  
Intake air flows through the filter before circulating in the front compartment to cool 
the main electronics. Replace the air filter whenever the lamp is replaced – or more 
often in dusty or dirty environments. Check condition monthly. Refer to 
Filter 
Replacement on page 95 for detailed instructions. 
13.FRONT IR SENSOR  
Receives IR commands from the TheaterMaster remote control. 
14.FOCUS KNOB  
Located directly under the primary lens. Use this to focus projected image.
15.VERTICAL OFFSET KNOB ACCESS 
Remove this plastic cover to access the vertical offset knob, for adjusting the 
projected image position up or down, relative to the lens center.
The SC-1 requires a dedicated, 220-VAC/30A circuit. Connect 
only the SC-1 to this circuit. 
Caution 
						

							Controls and Functions
Runco SC-1 Owner’s Operating Manual 7 
PREL
IMINARY
2.2 
SC-1 Input Panel
Figure 2-2 shows the SC-1 rear input panel. 
Figure 2-2. SC-1 Input Panel
9
3
2
4
7
5
1
8
6
11
10 
						

							Controls and Functions
8 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
1.INPUT 1 (RGBHV)  
Not used. Connect all video sources to the DHD Controller.
2.INPUT 2 (DVI)  
HDCP-compliant digital video input. Connect the HDMI output from the DHD 
Controller to this input. 
3.INPUT 3 (Video) / INPUT 4 (S-Video)  
Not used. Connect all video sources to the DHD Controller. 
4.ETHERNET  
Reserved for future use. 
5.REMOTE  
Wired input from an external remote control or infrared receiver.
6.GPIO  
Not used. 
7.RS422  
Not used. 
8.RS232 OUT  
Not used.
9.RS232 IN (9-pin, D-sub female) 
Connect the RS-232 output from the DHD Controller here, using the provided 
RJ11-to-DB9 adapter and communication cable. 
10.INPUT 5 (Option 1) 
Reserved for future use.
11.INPUT 6 (Option 2) 
Reserved for future use.