Ricoh R10 User Guide
Have a look at the manual Ricoh R10 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 156
154
Changing Camera Settings5
(*)The default setting varies depending on where you purchased the camera.
Note ----------------------------------------------------------------------------------------------When the mode dial is set to easy shooting mode, the quantity and order of the items in
the setup menu are different from other shooting modes. The contents of the settings are
the same as other modes.
In easy shooting mode, [Set Fn Button] can be set to [Off], [Macro Trgt] or [Back.Comp.].
1Press the...](http://img.usermanuals.tech/thumb/64/49822/w64_ricoh_r10-user-guide-155.png "Page 156
154
Changing Camera Settings5
(*)The default setting varies depending on where you purchased the camera.
Note ----------------------------------------------------------------------------------------------When the mode dial is set to easy shooting mode, the quantity and order of the items in
the setup menu are different from other shooting modes. The contents of the settings are
the same as other modes.
In easy shooting mode, [Set Fn Button] can be set to [Off], [Macro Trgt] or [Back.Comp.].
1Press the...")
![Page 158
156
Changing Camera Settings5If the error message [Card Error] is displayed when an SD memory
card is loaded into the camera or the card has been used with a
computer or other digital camera, you must format the card prior to
use with this camera.
Formatting is the process of preparing a card so image data can be
written on it.
Caution------------------------------------------------------------------------------------------
If you format a card that still has images stored on it, the images will be...](http://img.usermanuals.tech/thumb/64/49822/w64_ricoh_r10-user-guide-157.png "Page 158
156
Changing Camera Settings5If the error message [Card Error] is displayed when an SD memory
card is loaded into the camera or the card has been used with a
computer or other digital camera, you must format the card prior to
use with this camera.
Formatting is the process of preparing a card so image data can be
written on it.
Caution------------------------------------------------------------------------------------------
If you format a card that still has images stored on it, the images will be...")
![Page 159
157
Changing Camera Settings5 If the error message [Format internal memory] is displayed, you
must format the internal memory prior to use.
Caution------------------------------------------------------------------------------------------
Formatting the internal memory deletes all of the images recorded in the memory. If you
have images in the internal memory that you do not want to delete, copy the images to
the SD memory card before formatting the internal memory. (GP.140)
1Display the setup menu.
•...](http://img.usermanuals.tech/thumb/64/49822/w64_ricoh_r10-user-guide-158.png "Page 159
157
Changing Camera Settings5 If the error message [Format internal memory] is displayed, you
must format the internal memory prior to use.
Caution------------------------------------------------------------------------------------------
Formatting the internal memory deletes all of the images recorded in the memory. If you
have images in the internal memory that you do not want to delete, copy the images to
the SD memory card before formatting the internal memory. (GP.140)
1Display the setup menu.
•...")
![Page 160
158
Changing Camera Settings5To adjust the brightness of the picture display, follow the steps
below.
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button to
select [LCD Brightness] and
press the button $.
• The screen for setting the brightness
appears.
3Press the button ! to adjust
the brightness.
• Move the slider on the LCD brightness
adjustment bar down to make the
picture display darker and up to make
it brighter. The brightness of the
picture...](http://img.usermanuals.tech/thumb/64/49822/w64_ricoh_r10-user-guide-159.png "Page 160
158
Changing Camera Settings5To adjust the brightness of the picture display, follow the steps
below.
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button to
select [LCD Brightness] and
press the button $.
• The screen for setting the brightness
appears.
3Press the button ! to adjust
the brightness.
• Move the slider on the LCD brightness
adjustment bar down to make the
picture display darker and up to make
it brighter. The brightness of the
picture...")
![Page 161
159
Changing Camera Settings5 The My Settings function allows you to easily shoot with your
desired settings.
You can register two groups of settings as “My Settings”. Setting the
mode dial to MY1 allows you to shoot with the settings registered in
[MY1]. Setting the mode dial to MY2 allows you to shoot with the
settings registered in [MY2]. (GP.44)
To register the current camera settings as My Settings, follow the
steps below.
1Change the camera settings to the settings to be
registered as My...](http://img.usermanuals.tech/thumb/64/49822/w64_ricoh_r10-user-guide-160.png "Page 161
159
Changing Camera Settings5 The My Settings function allows you to easily shoot with your
desired settings.
You can register two groups of settings as “My Settings”. Setting the
mode dial to MY1 allows you to shoot with the settings registered in
[MY1]. Setting the mode dial to MY2 allows you to shoot with the
settings registered in [MY2]. (GP.44)
To register the current camera settings as My Settings, follow the
steps below.
1Change the camera settings to the settings to be
registered as My...")
![Page 162
160
Changing Camera Settings5Settings Saved in [Reg. My Settings]
Shooting mode (5/3/MY1/MY2/SCENE)
Pic Quality/Size
Focus
Focal distance used in Manual
Exposure Metering
Continuous Mode
Image Settings
Flash Expo. Comp.
Auto Bracket
CL-BKT
WB-BKT
Time Exposure
Record Dual Size
Custom Self-Timer
Fix Min. Aperture
Camera Shake Cor
Slow Shutter Lmt
Date Imprint
Exposure Comp.
White Balance
ISO Setting
Zoom position
Macro
Flash mode
Scene mode
Self-timer
DISP. mode
Step Zoom
Sub File Size
Digital Zoom Img...](http://img.usermanuals.tech/thumb/64/49822/w64_ricoh_r10-user-guide-161.png "Page 162
160
Changing Camera Settings5Settings Saved in [Reg. My Settings]
Shooting mode (5/3/MY1/MY2/SCENE)
Pic Quality/Size
Focus
Focal distance used in Manual
Exposure Metering
Continuous Mode
Image Settings
Flash Expo. Comp.
Auto Bracket
CL-BKT
WB-BKT
Time Exposure
Record Dual Size
Custom Self-Timer
Fix Min. Aperture
Camera Shake Cor
Slow Shutter Lmt
Date Imprint
Exposure Comp.
White Balance
ISO Setting
Zoom position
Macro
Flash mode
Scene mode
Self-timer
DISP. mode
Step Zoom
Sub File Size
Digital Zoom Img...")
![Page 163
161
Changing Camera Settings5 Step zooming allows you to set the focal length of the zoom so that
it stops at seven levels (28, 35, 50, 85, 105, 135, 200 mm*).
* Equivalent to that on a 35mm camera
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button to select [Step Zoom] and
press the button $.
3Press the button ! to select
[On].
4Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------•In...](http://img.usermanuals.tech/thumb/64/49822/w64_ricoh_r10-user-guide-162.png "Page 163
161
Changing Camera Settings5 Step zooming allows you to set the focal length of the zoom so that
it stops at seven levels (28, 35, 50, 85, 105, 135, 200 mm*).
* Equivalent to that on a 35mm camera
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button to select [Step Zoom] and
press the button $.
3Press the button ! to select
[On].
4Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------•In...")
![Page 165
163
Changing Camera Settings5 Note ----------------------------------------------------------------------------------------------
The items that can be set for each scene mode are shown below. The settings that are
not marked O can be assigned to the Fn button with [Set Fn Button], but they cannot be
operated by pressing the Fn button.
When Mode Dial is Set to EASY
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button to select [Set Fn Button]
and press the...](http://img.usermanuals.tech/thumb/64/49822/w64_ricoh_r10-user-guide-164.png "Page 165
163
Changing Camera Settings5 Note ----------------------------------------------------------------------------------------------
The items that can be set for each scene mode are shown below. The settings that are
not marked O can be assigned to the Fn button with [Set Fn Button], but they cannot be
operated by pressing the Fn button.
When Mode Dial is Set to EASY
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button to select [Set Fn Button]
and press the...")
![Page 166
164
Changing Camera Settings5You can change the upper limit of the ISO setting for [Auto-Hi] (Auto
high sensitivity setting) (GP.114) in [ISO Setting] on the shooting
menu.
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button to select [ISO Auto-High]
and press the button $.
3Press the button ! to select
the desired setting.
4Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------Images shot...](http://img.usermanuals.tech/thumb/64/49822/w64_ricoh_r10-user-guide-165.png "Page 166
164
Changing Camera Settings5You can change the upper limit of the ISO setting for [Auto-Hi] (Auto
high sensitivity setting) (GP.114) in [ISO Setting] on the shooting
menu.
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button to select [ISO Auto-High]
and press the button $.
3Press the button ! to select
the desired setting.
4Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------Images shot...")
159 Changing Camera Settings5 The My Settings function allows you to easily shoot with your desired settings. You can register two groups of settings as “My Settings”. Setting the mode dial to MY1 allows you to shoot with the settings registered in [MY1]. Setting the mode dial to MY2 allows you to shoot with the settings registered in [MY2]. (GP.44) To register the current camera settings as My Settings, follow the steps below. 1Change the camera settings to the settings to be registered as My Settings. 2Display the setup menu. • For the operating procedure, see P.154. 3Press the ADJ./OK button to select [Reg. My Settings] and press the button $. • A confirmation message appears. 4Press the button #$ to select [MY1] or [MY2] and press the ADJ./OK button. • The current camera settings are registered and the display returns to the setup menu. • If you do not want to register them, press the DISP. button. 5Press the MENU button or the ADJ./OK button. Registering Custom Settings (Reg. My Settings) Downloaded From camera-usermanual.com Ricoh Manuals
160 Changing Camera Settings5Settings Saved in [Reg. My Settings] Shooting mode (5/3/MY1/MY2/SCENE) Pic Quality/Size Focus Focal distance used in Manual Exposure Metering Continuous Mode Image Settings Flash Expo. Comp. Auto Bracket CL-BKT WB-BKT Time Exposure Record Dual Size Custom Self-Timer Fix Min. Aperture Camera Shake Cor Slow Shutter Lmt Date Imprint Exposure Comp. White Balance ISO Setting Zoom position Macro Flash mode Scene mode Self-timer DISP. mode Step Zoom Sub File Size Digital Zoom Img Level Setting Min. Macro Distance Density Frame Rate Downloaded From camera-usermanual.com Ricoh Manuals
161 Changing Camera Settings5 Step zooming allows you to set the focal length of the zoom so that it stops at seven levels (28, 35, 50, 85, 105, 135, 200 mm*). * Equivalent to that on a 35mm camera 1Display the setup menu. • For the operating procedure, see P.154. 2Press the ADJ./OK button to select [Step Zoom] and press the button $. 3Press the button ! to select [On]. 4Press the ADJ./OK button. Note ----------------------------------------------------------------------------------------------•In Macro mode, the step zoom focal lengths are roughly equivalent to 32, 35, 50, 85, 105, 135 and 200 mm on a 35 mm camera. •Assigning [Step Zoom] to the Fn (Function) button with [Set Fn Button] (GP.162) allows you to switch between on and off for step zoom by pressing the Fn button. (GP.77) Setting the Zoom to a Fixed Focal Length (Step Zoom) Available Settings On (Step zooming on) Off (Step zooming off) *Default setting Downloaded From camera-usermanual.com Ricoh Manuals
162 Changing Camera Settings5When a function is assigned to the Fn button, you can easily switch from one function to another simply by pressing the Fn button. The following functions can be assigned to the Fn button. For information on how to use the Fn button, see the corresponding reference page. When Mode Dial is Set to 5 When Mode Dial is Set to SCENE Assigning a Function to the Fn (Function) Button (Set Fn Button) Available SettingDescriptionRefer to MoveTarget *Default settingMoves both the AE and AF, or one or the other targets.P.73 AE LockLocks the exposure.P.75 Step Zoom, AT-BKT, WB-BKT, CL-BKT, Min. Aper.Switches between on and off for each function. P.77 Available SettingDescriptionRefer to Macro Trgt *Default settingMoves the AF target without moving the camera to shoot close-ups.P.74 AE LockLocks the exposure.P.75 Step Zoom, AT-BKT, WB-BKT, CL-BKT, Min. Aper.Switches between on and off for each function. P.77 Downloaded From camera-usermanual.com Ricoh Manuals
163 Changing Camera Settings5 Note ---------------------------------------------------------------------------------------------- The items that can be set for each scene mode are shown below. The settings that are not marked O can be assigned to the Fn button with [Set Fn Button], but they cannot be operated by pressing the Fn button. When Mode Dial is Set to EASY 1Display the setup menu. • For the operating procedure, see P.154. 2Press the ADJ./OK button to select [Set Fn Button] and press the button $. 3Press the button ! to select the settings. 4Press the ADJ./OK button. Available Setting PortraitFaceSportsLandscapeNightscapeNight. Port.High SensZoom MacroSkew Correct ModeText ModeMacro Trgt------OOOOAE LockOOOOOOOOOO Step ZoomOOOOOOOOOO AT-BKT-------O-- WB-BKT-------O-- CL-BKT-------O-- Min. Aper.-------OO- Available SettingDescriptionRefer to Back.Comp. *Default settingSwitches between on and off for the backlight compensation function.P.76 Macro TrgtMoves the AF target without moving the camera to shoot close-ups.P.74 Downloaded From camera-usermanual.com Ricoh Manuals
164 Changing Camera Settings5You can change the upper limit of the ISO setting for [Auto-Hi] (Auto high sensitivity setting) (GP.114) in [ISO Setting] on the shooting menu. 1Display the setup menu. • For the operating procedure, see P.154. 2Press the ADJ./OK button to select [ISO Auto-High] and press the button $. 3Press the button ! to select the desired setting. 4Press the ADJ./OK button. Note ----------------------------------------------------------------------------------------------Images shot with a higher sensitivity may appear grainy. Changing the ISO Auto-High Setting (ISO Auto-High) Available Settings AUTO 400 *Default setting AUTO 800 AUTO1600 Downloaded From camera-usermanual.com Ricoh Manuals
165 Changing Camera Settings5 When shooting a still image with a subfile (GP.101), you can select the size of the subfile that is recorded at the same time as the original still image. Caution------------------------------------------------------------------------------------------ No subfile is created when [Pic Quality/Size] for the original still image is set to [N1280[1M]] and [Sub File Size] is set to [1280[1M]]. 1Display the setup menu. • For the operating procedure, see P.154. 2Press the ADJ./OK button to select [Sub File Size] and press the button $. 3Press the button ! to select the desired setting. 4Press the ADJ./OK button. Changing the Size for Record Dual Size (Sub File Size) Available Settings 1280[1M] 640[VGA] 480 320[QVGA] *Default setting Downloaded From camera-usermanual.com Ricoh Manuals
166 Changing Camera Settings5The following five operation sounds are made during camera operation. Note ----------------------------------------------------------------------------------------------If you try to perform an operation that cannot be performed, the beep sound is emitted regardless of the [Operation Sounds] setting. 1Display the setup menu. • For the operating procedure, see P.154. 2Press the ADJ./OK button to select [Operation Sounds] and press the button $. 3Press the button ! to select the desired setting. 4Press the ADJ./OK button. Changing the Operation Sound Setting (Operation Sounds) Start sound : Sound when the camera is turned on. Shutter release sound : Sound when the shutter release button is pressed. Focus sound : Sound when the shutter release button is half-pressed and the camera focuses on the subject. Beep sound : Error sound indicating an operation that cannot be performed. LevelSound : When [Level Setting] is set to [Sound] or [Disp + Snd] (GP.172), the sound is continually emitted at a set interval when the camera is level in shooting mode. Available SettingsDescription All *Default setting All sounds on LevelSoundOnly the level sound is emitted. Shutter Only the shutter sound and level sound are emitted. Downloaded From camera-usermanual.com Ricoh Manuals
167 Changing Camera Settings5 The operation sound volume can be changed. 1Display the setup menu. • For the operating procedure, see P.154. 2Press the ADJ./OK button to select [Vol. Settings] and press the button $. 3Press the button ! to select the desired setting. 4Press the ADJ./OK button. Note ----------------------------------------------------------------------------------------------The level sound is not emitted, even when [Level Setting] is set to [Disp + Snd] or [Sound] and [Vol. Settings] is set to [F F F] (Mute) (GP.172). Changing the Operation Sound Volume (Vol. Settings) Available SettingsF F F (Mute)J F F (Small)J J F (Medium) *Default settingJ J J (Large) Downloaded From camera-usermanual.com Ricoh Manuals
168 Changing Camera Settings5Immediately after you press the shutter release button, the still image taken is displayed on the screen for a moment so you can check it. By default, the image confirmation time is set to 0.5 second, but this can be changed. 1Display the setup menu. • For the operating procedure, see P.154. 2Press the ADJ./OK button to select [LCD Confirm.] and press the button $. 3Press the button ! to select the desired setting. 4Press the ADJ./OK button. Note ----------------------------------------------------------------------------------------------When [LCD Confirm.] is set to [Hold], the displayed image can also be enlarged (GP.55) or deleted (GP.56). Changing Image Confirmation Time (LCD Confirm.) Available Settings Off (The image is not displayed for confirmation.) 0.5Sec. *Default setting 1 Sec. 2 Sec. 3 Sec. Hold (The image remains displayed until the next time you half-press the shutter release button.) Downloaded From camera-usermanual.com Ricoh Manuals