Ricoh R10 User Guide

							119
Shooting/Playing Back Movies2 Note ----------------------------------------------------------------------------------------------
•Movie recording time may vary depending on the capacity of the recording destination 
(internal memory or SD memory card), shooting conditions, and the type and 
manufacturer of the SD memory card.
•The estimated total recording time is shown below. The maximum recording time per 
shooting is 90 minutes or the equivalent of 4 GB.
Internal 
Memory1 GB2 GB4 GB8 GB16 GB
640×480
(15Frame/S)1 min 
22 s23 min 
42 s48 min 
13 s99 min
8 s193 min 
30 s394 min 
53 s
640×480
(30Frame/S)41 s11 min 
59 s24 min 
23 s50 min 
10 s97 min 
55 s199 min 
49 s
320×240
(15Frame/S)2 min 
40 s46 min 
19 s94 min 
11 s193 min 
41 s378 min 
2 s771 min 
25 s
320×240
(30Frame/S)1 min 
22 s23 min 
42 s48 min 
13 s99 min 
8 s193 min 
30 s394 min 
53 s
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							120
Shooting/Playing Back Movies2To playback movies, follow the steps below.
1Press the 6 (Playback) button.
• The last movie shot is displayed.
• The first frame of the movie is displayed as a still image.
2Press the ADJ./OK button 
!#$ to select the movie 
you want to view.
• Press the button $ to display the next 
file.
• Press the button # to display the 
previous file.
• Press the button ! to display the file 
10 frames backward.
• Press the button  to display the file 10 frames forward.
3Press the ADJ./OK button.
• Playback begins. 
The elapsed playback indicator or the elapsed time is displayed on the 
screen.
Playing Back Movies
Fast ForwardTurn the zoom lever toward z during playback.
Rewind Turn the zoom lever toward Z during playback.
Pause/PlaybackPress the ADJ./OK button.
Slow Playback Turn and hold the zoom lever toward z during pause.
Slow RewindTurn and hold the zoom lever toward Z during pause.
Next Frame Turn the zoom lever toward z during pause.
Previous FrameTurn the zoom lever toward Z during pause.
Volume Adjustment Press the ADJ./OK button ! during playback.
12:0012:002008/01/012008/01/01StartStart
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							121
Other Playback Functions3
3 Other Playback Functions
Press the MENU button in playback mode to display the playback 
menu. The playback menu allows you to make the settings for the 
following functions.
Note ----------------------------------------------------------------------------------------------
The setup menu can be accessed from within the playback menu. (GP.153)
Instructions in this manual to “Press the ADJ./OK button !#$” 
indicate that you should press the ADJ./OK button in the up, down, 
left or right direction. Instructions to “Press the ADJ./OK button” 
indicate that you should press directly down on the button.
Playback Menu
SettingOptionsRefer to
Flag Function Setting P.123
Flag Function DisplayP.125
Resize 1280, 640 P.126
TrimP.127
Level Compensation Auto, Manual P.129
White Balance 
CompensationP.132
Skew Correction P.134
ProtectSelect/Cancel 1 File, Select/Cancel All Files, Select 
Multi-filesP.136
Slide Show P.139
Copy To CardP.140
DPOF Select/Cancel 1 File, Select/Cancel All Files, Select 
Multi-filesP.141
Recover FileP.144
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							122
Other Playback Functions3
1Press the 6 (Playback) button to select the playback 
mode.
2Press the MENU button.
• The playback menu appears.
3Press the ADJ./OK button 
! to select the desired item.
• If the DISP. button is pressed at this 
point, the display returns to the screen 
shown in Step 2.
• Press the ADJ./OK button  at the 
bottom item to display the next screen.
4Press the ADJ./OK button $.
• The screen for the selected menu item appears.
Changing the display ----------------------------------------------------------------------Press the ADJ./OK button # to select a tab on 
the left of the screen.
(If the DISP. button is pressed at this point, the 
display returns to the screen shown in Step 2.)
•Press the ADJ./OK button ! to change 
screens.
•Press the ADJ./OK button $ to return to 
menu item selection.
Using the Menu
The menu items are 
provided on two screens.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							123
Other Playback Functions3 You can set useful image files, such as a train time table or a map, 
to [Flag Function Setting], and then press the Fn (Function) button 
during playback to easily display these files whenever you like. Up 
to three files can be saved with [Flag Function Setting].
1Press the 6 (Playback) button.
2Press the ADJ./OK button !#$ to display the file you 
want to set or cancel.
3Press the MENU button.
• The playback menu appears.
4Press the ADJ./OK button  to 
select [Flag Function Setting] 
and press the button $.
• The [Flag Function Setting] screen 
appears.
5Make sure that [Set] is selected 
to save a file or [Cancel] is 
selected to cancel a file, and 
then press the ADJ./OK button.
• When a file is set, the symbol appears on the screen.
• If three files have already been set, no more files can be set.
Note ----------------------------------------------------------------------------------------------If an enlarged still image is set, the magnification ratio and magnified area are saved and 
the enlarged image can be displayed as is.
Saving Images You Want to Quickly 
Display (Flag Function Setting)
Setting/Canceling One File at a Time
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							124
Other Playback Functions3
1Press the 6 (Playback) button.
2Turn the zoom lever toward 9 (Thumbnail Display).
• The screen is divided into 20 frames and thumbnails are displayed.
3Press the ADJ./OK button !#$ to select the first file 
you want to set or cancel.
4Press the MENU button.
• The playback menu appears.
5Press the ADJ./OK button  to select [Flag Function 
Setting] and press the button $.
• When a file is set, the symbol appears 
on the file.
• If three files have already been set, no 
more files can be set.
6Press the button !#$ to 
select the next file you want to 
set or cancel and press the 
ADJ./OK button.
7Repeat Step 6 to select all the files you want to set or 
cancel.
• If you selected a file by mistake, select the file and press the ADJ./OK 
button again.
8Press the DISP. button.
Caution------------------------------------------------------------------------------------------•If the name of the file set to [Flag Function Setting] is changed using a computer, the 
file is canceled from [Flag Function Setting].
•When the contents of the internal memory are copied to an SD memory card, the files 
set to [Flag Function Setting] in the internal memory are canceled.
•When a file in an SD memory card is set to [Flag Function Setting], [CLIPINFO] folder 
and CLIP.CLI file are created on the SD memory card. If these are deleted, the 
corresponding file is canceled from [Flag Function Setting].
•If the name of an image file is changed using a computer, the file may not be able to 
be set to [Flag Function Setting].
•Only images taken using this camera can be set to [Flag Function Setting].
Setting/Canceling Multiple Files at One Time
Flag Func. Set.
Sel/Cancel
Finish
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							125
Other Playback Functions3
1Press the 6 (Playback) button.
2Press the Fn (Function) button, 
or select [Flag Function 
Display] from the playback 
menu, and press the ADJ./OK 
button $.
• The file set to [Flag Function Setting] 
with the smallest file number is 
displayed.
• You can use the zoom lever to change the size of still images. You can 
also press the ADJ./OK button !#$ to move the displayed image. 
Changes to the magnification ratio and magnified area are saved, and 
the image is displayed as is the next time.
• You can press the shutter release button or the 6 button to switch to 
shooting mode.
• If no files are set to [Flag Function Setting], a message appears and 
you are returned to the playback menu.
3Press the Fn button again as required.
• If multiple files are set to [Flag Function Setting], pressing the Fn 
button displays the image with the smallest file number.
Note ----------------------------------------------------------------------------------------------When a file set to [Flag Function Setting] is displayed at normal magnification, pressing 
the ADJ./OK button !#$ displays the previous or next image.
Displaying an Image Set to [Flag 
Function Setting] 
(Flag Function Display)
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							126
Other Playback Functions3You can reduce the image size of a shot still image to create a new 
file with a different image size.
Caution------------------------------------------------------------------------------------------
You can resize only still images. Movies cannot be resized.
Note ----------------------------------------------------------------------------------------------•The ratio of width to height of [F3:2] images is 3:2. When an image of this type is 
resized, it is reduced to a 4:3 image with black borders at the top and bottom.
•In [F1:1] images, the height and width are the same. When an image of this type is 
resized, it is reduced to a 4:3 image with black borders added on the left and right 
sides.
•You can also change the image size during shooting. (GP.83)
1Press the 6 (Playback) button.
2Press the ADJ./OK button !#$ to display the file 
with the image size you want to change.
3Press the MENU button.
• The playback menu appears.
4Press the ADJ./OK button  to 
select [Resize] and press the 
button $.
5Press the button ! to select 
[1280] or [640].
6Press the ADJ./OK button.
• The display indicates that the image is 
being resized, and then the resized 
image is recorded. The original image 
remains unchanged.
Changing the Image Size (Resize)
OriginalResized
F3648/N3648/F3:2/F1:1/N3264/N2592/N2048 N1280 N640
N1280N640
Finish
640 1280Select
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							127
Other Playback Functions3 This function allows you to trim a still image you have shot and then 
save it as a separate file.
1Press the 6 (Playback) button.
2Press the ADJ./OK button !#$ to display the file you 
want to trim.
3Press the MENU button.
• The playback menu appears.
4Press the ADJ./OK button  to select [Trim] and press 
the button $.
• The [Trim] screen appears.
• To cancel trimming, press the DISP. button.
5Turn the zoom lever toward 8 
or 9 to set the size of the 
trimming frame.
6Press the ADJ./OK button 
!#$ to set the position of 
the trimming frame.
7Press the ADJ./OK button.
• The trimmed image is recorded. The original image remains 
unchanged.
Caution------------------------------------------------------------------------------------------•You can only trim still images shot using this camera.
•You cannot trim images shot in Movie, S-Cont or M-Cont mode.
•Subfiles with [Sub File Size] set to lower than [N640[VGA]] cannot be trimmed, when 
shooting a still image with a subfile with [Record Dual Size] set to [On]. (GP.101, 165)
•While you can trim an image repeatedly, the image is recompressed each time and 
there will be some decline in image quality.
Note ----------------------------------------------------------------------------------------------•If an image is trimmed, the compression ratio changes to Normal.
•The available settings for the trimming frame size differ depending on the original 
image size. Each time you turn the zoom lever toward 8, the trimming frame 
decreases in size by one level. You can decrease the frame size through 13 levels 
down to the smallest size.
Trimming Still Images (Trim)
Tr i m
Execute Cancel
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							128
Other Playback Functions3
•The size of the trimmed image varies depending on the original image size and the 
trimming level (the trimming frame size). Refer to the table shown below. (The initial 
trimming frame displayed on the [Trim] screen is the second trimming level. You can 
display the first trimming level (maximum frame size) by turning the zoom lever 
toward9.)
(*1) The aspect ratio of an [F3:2] image is 3:2, but this changes to 4:3 
when the image is trimmed.
(*2) The aspect ratio of an [F1:1] image is 1:1, but this changes to 4:3 
when the image is trimmed.
Original image sizeTrimming levelTrimmed image size
3648 × 27361 3264 × 2448
2, 32592 × 1944
4, 5 2048 × 1536
6 to 91280 × 960
10 to 13 640 × 480
3648 × 2432(*1)
13264 × 2448
2 2592 × 1944
3 to 52048 × 1536
6 to 9 1280 × 960
10 to 13640 × 480
2736 × 2736(*2)1 2592 × 1944
2 to 42048 × 1536
5 to 8 1280 × 960
9 to 12640 × 480
3264 × 24481, 2 2592 × 19443 to 52048 × 1536
6 to 8 1280 × 960
9 to 13640 × 480
2592 × 19441 2592 × 1944
2, 32048 × 1536
4 to 7 1280 × 960
8 to 12640 × 480
2048 × 15361, 2 2048 × 15363 to 61280 × 960
7 to 10 640 × 480
1280 × 960
1 to 31280 × 960
4 to 8 640 × 480
640 × 4801 to 4640 × 480
Downloaded From camera-usermanual.com Ricoh Manuals