Ricoh R10 User Guide

							149
Direct Printing4 You can print still images from the camera with a PictBridge-
compatible printer.
Still images are sent from the internal memory when no SD memory 
card is loaded or from an SD memory card when one is loaded.
Caution------------------------------------------------------------------------------------------
Do not disconnect the USB cable during printing.
Note ----------------------------------------------------------------------------------------------•If a [Printer Error.] message appears during image transfer, check the printer status 
and take the appropriate action.
•If a computer connection message appears even though the camera is connected to 
the printer, reconnect the camera and press the ADJ./OK button within 2 seconds.
1Check that the printer is ready 
to print.
• The [Connecting…] screen appears.
2Press the ADJ./OK button.
• The Direct Print playback mode 
screen appears.
3Press the ADJ./OK button 
!#$ to select an image for printing.
4Press the ADJ./OK button.
5Press the ADJ./OK button ! 
to select [1 File] or [All Files].
6Press the ADJ./OK button.
• The Direct Print menu appears.
Printing Still Images
Printing One or All Still Images
Finish
All Files1 File
Select
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							150
Direct Printing4
7Press the ADJ./OK button ! 
to select an item, and then 
press the button $ to display 
the detailed options screen.
• When [Connecting…] is displayed, the 
connection to the printer is not yet 
established. When a connection is 
established, [Connecting…] 
disappears and [Direct Print] appears. 
Proceed with this step after the connection is established.
• The following items can be selected. Each item is available only when 
supported by the printer connected to the camera.
(*)Each item is available only when supported by the Ricoh printer connected 
to the camera.
8Press the ADJ./OK button ! to select the setting, and 
then press the ADJ./OK button.
• The display returns to the Direct Print menu.
9Repeat Steps 7 and 8 to change other settings as 
required.
Item NameDescription
Paper Size Sets the paper size.
Paper TypeSets the paper type.
Layout Sets the number of images printed on a sheet of paper. The number 
of images that can be laid out on a sheet of paper varies depending 
on the connected printer.
Date PrintSelects whether to print the date (shooting date). The date format can 
be set using the date/time option in the setup menu.
File Name Print Selects whether to print the file name.
Optimize ImageSelects whether to optimize the image data (still image) prior to 
printing on the printer.
Print Size Sets the print image size.
Print QualitySets the print quality.
Report Print(*)Prints on forms.Printing QuantitySets the print quantity.
Toner Saving(*)Selects whether to conserve toner by using less ink during printing.1-Side/2-Sides(*)Selects whether to print on both sides of the paper. During duplex 
printing, one copy is printed for each still image. Only one copy is 
printed even if you selected more than one copy to print in Step 6 on 
P.151.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							151
Direct Printing4 Note ----------------------------------------------------------------------------------------------
•To specify the settings as the default settings 
next time the camera is connected to the 
printer, press the MENU button when the 
screen in Step 7 is displayed. When the 
screen at the right appears, press the ADJ./
OK button #$ to select [Set] and press the 
ADJ./OK button.
•To use the settings last set the next time the 
camera is connected to the printer, select 
[Cancel].
10Press the ADJ./OK button.
• The selected still images are sent to the printer and the [Sending…] 
screen appears.
• Pressing the DISP. button cancels the operation.
• When the images have been sent to the printer, the display returns to 
the Direct Print playback mode screen and printing starts.
1Check that the printer is ready 
to print.
• The [Connecting…] screen appears.
2Press the ADJ./OK button.
• The Direct Print playback mode 
screen appears.
3Turn the zoom lever toward 9 
(Thumbnail Display).
• The screen is divided into 20 frames and thumbnails are displayed.
4Press the ADJ./OK button !#$ to select a still image 
for printing.
5Press the ADJ./OK button.
6Press the ADJ./OK button ! 
to set the number of copies to 
print.
• Press the button ! to increase the 
number of copies, or press the button 
 to decrease the number of copies.
Printing Several Still Images
Prnt Fil
Forward
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							152
Direct Printing4
7Press the button #$ to select the next still image for 
printing.
8Press the button ! to set the number of copies to 
print.
9Repeat Steps 7 and 8 to select all the still images to be 
printed and the number of copies for each.
10Press the ADJ./OK button.
• The Direct Print menu appears.
11Press the ADJ./OK button ! 
to select an item, and then 
press the button $ to display 
the detailed options screen.
• When [Connecting…] is displayed, the 
connection to the printer is not yet 
established. When a connection is 
established, [Connecting…] 
disappears and [Direct Print] appears. 
Proceed with this step after the connection is established.
• For available settings, see P.150.
12Press the ADJ./OK button ! to select the setting, and 
then press the ADJ./OK button.
• The display returns to the Direct Print menu.
13Repeat Steps 11 and 12 to change other settings as 
required.
14Press the ADJ./OK button.
• The selected still images are sent to the printer and the [Sending…] 
screen appears.
• Pressing the DISP. button cancels the operation.
• When all the selected still images have been sent from the camera to 
the printer, the camera display returns to the Direct Print playback 
mode screen.
Note ----------------------------------------------------------------------------------------------•Only images with a printer symbol ( ) are printed. If you cancel printing and then 
try to print again, make sure that the printer symbol is on the images you want to print.
•The same still image can also be printed several times on a single sheet.
•The available items vary depending on the functions of the printer.
•To print images using the printer’s default settings, select [Printer Select] on the 
detailed options screen.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							153
Changing Camera Settings5
5 Changing Camera Settings
You can change the camera settings by displaying the setup menu 
from the shooting menu (GP.78) or playback menu (GP.121).
The setup menu enables you to set the items listed in the table 
below.Instructions in this manual to “Press the ADJ./OK button !#$” 
indicate that you should press the ADJ./OK button in the up, down, 
left or right direction. Instructions to “Press the ADJ./OK button” 
indicate that you should press directly down on the button.
Setup Menu
SettingOptions [Default Settings]Refer to
Format [Card] P.156
Format [Internal]P.157
LCD Brightness P.158
Reg. My SettingsMY1, MY2P.159
Step Zoom On, [Off] P.161
Set Fn ButtonOff, [MoveTarget], Step Zoom, AE Lock, AT-BKT, 
CL-BKT, WB-BKT, Min. Aper.P.162
ISO Auto-High [AUTO 400], AUTO 800, AUTO1600 P.164
Sub File Size1280[1M], 640[VGA], 480, [320[QVGA]]P.165
Operation Sounds [All], LevelSound, Shutter P.166
Vol. SettingsF F F (Mute), J F F (Small), [J J F] (Medium), J J J (Large)P.167
LCD Confirm. Off, [0.5Sec.], 1 Sec., 2 Sec., 3 Sec., Hold P.168
Digital Zoom Img[Normal], Auto ResizeP.169
ADJ Btn. Set.1*1
ADJ Btn. Set.2*2
ADJ Btn. Set.3*3
ADJ Btn. Set.4*4
Off, [Expo. Cmp]*1, [Wht. Bal.]*2, [ISO]*3, [Quality]*4, 
Focus, Image, Expo. Met., Cont Mode, Auto BKT, 
Flash Comp, Min. Aper.P.171
Level SettingOff, [Display], Disp + Snd, SoundP.172
AF Aux. Light [On], Off P.173
Auto Power OffOff, [1 Min.], 5 Min., 30Min.P.174
LCD Auto Dim [On], Off P.175
Min. Macro Distance[Show], HideP.176
Auto Rotate [On], Off P.177
Sequential No.On, [Off]P.179
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							154
Changing Camera Settings5
(*)The default setting varies depending on where you purchased the camera.
Note ----------------------------------------------------------------------------------------------When the mode dial is set to easy shooting mode, the quantity and order of the items in 
the setup menu are different from other shooting modes. The contents of the settings are 
the same as other modes.
In easy shooting mode, [Set Fn Button] can be set to [Off], [Macro Trgt] or [Back.Comp.].
1Press the MENU button.
• The shooting menu (or the playback menu) appears.
2Press the ADJ./OK button $.
• The setup menu appears.
• In scene mode, press the ADJ./
OK button ! once or twice to 
select the [MODE] tab, and then 
press the ADJ./OK button $ 
twice. The setup menu appears.
3Press the ADJ./OK button ! 
to select the desired item.
• If the DISP. button is pressed at this 
point, the display returns to the screen 
shown in Step 2.
• Press the ADJ./OK button  at the 
bottom item to display the next screen. Date Settings P.181
Language/N(*), English, Deutsch, Français, Italiano, 
Español, , , , P.182
Video Out Mode
(*)NTSC, PAL P.183
Using the Setup Menu
In the instructions of this manual, the menu selection is confirmed when you “Press the ADJ./
OK button” (as in Step 6 below), but you can also confirm the setting and return to the menu 
screen by pressing the ADJ./OK button #.
SettingOptions [Default Settings]Refer to
The menu items are provided 
on five screens.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							155
Changing Camera Settings5
4Press the ADJ./OK button $.
• The menu item settings are displayed.
5Press the ADJ./OK button ! 
to select the setting.
6Press the ADJ./OK button.
• The setup menu disappears and the 
camera is ready for shooting or 
playback.
• The setup menu may appear depending on the setting. In this case, 
press the MENU button or the ADJ./OK button to return to the shooting 
or playback screen.
• Pressing the ADJ./OK button # in Step 6 confirms the setting and the 
display returns to the screen shown in Step 3.
Note ----------------------------------------------------------------------------------------------For some functions, the setting selection method may differ from what is explained here. 
For detailed operation, see the explanation of each function.
Changing the display ----------------------------------------------------------------------Press the ADJ./OK button # to select a tab on 
the left of the screen.
(If the DISP. button is pressed at this point, the 
display returns to the screen shown in Step 2.) 
•Press the ADJ./OK button ! to change 
screens.
•Press the ADJ./OK button $ to return to 
menu item selection.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							156
Changing Camera Settings5If the error message [Card Error] is displayed when an SD memory 
card is loaded into the camera or the card has been used with a 
computer or other digital camera, you must format the card prior to 
use with this camera.
Formatting is the process of preparing a card so image data can be 
written on it.
Caution------------------------------------------------------------------------------------------
If you format a card that still has images stored on it, the images will be lost.
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button  to 
select [Format [Card]] and 
press the button $.
• A screen appears to confirm 
formatting.
3Press the button #$ to select 
[Yes] and then press the ADJ./
OK button.
• Formatting starts. When it is done, the display returns to the setup 
menu.
• If no SD memory card is loaded, a message will be displayed. After 
turning the power off, load an SD memory card and repeat the 
formatting process again.
4Press the MENU button or the ADJ./OK button.
Protecting your images from being deleted----------------------------------------Move the write-protection switch on the SD memory card to “LOCK” to prevent your still 
images from being accidentally erased or the card from being formatted (GP.26). If 
you unlock the card (by returning the switch to its original position), it is once again 
possible to add and erase images and format the card.
Preparing the SD Memory Card 
(Format [Card])
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							157
Changing Camera Settings5 If the error message [Format internal memory] is displayed, you 
must format the internal memory prior to use.
Caution------------------------------------------------------------------------------------------
Formatting the internal memory deletes all of the images recorded in the memory. If you 
have images in the internal memory that you do not want to delete, copy the images to 
the SD memory card before formatting the internal memory. (GP.140)
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button  to 
select [Format [Internal]] and 
press the button $.
• A screen appears to confirm 
formatting.
3Press the button #$ to select 
[Yes] and then press the ADJ./
OK button.
• Formatting starts. When it is done, the display returns to the setup 
menu.
4Press the MENU button or the ADJ./OK button.
Formatting the Internal Memory 
(Format [Internal])
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							158
Changing Camera Settings5To adjust the brightness of the picture display, follow the steps 
below.
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button  to 
select [LCD Brightness] and 
press the button $.
• The screen for setting the brightness 
appears.
3Press the button ! to adjust 
the brightness.
• Move the slider on the LCD brightness 
adjustment bar down to make the 
picture display darker and up to make 
it brighter. The brightness of the 
picture display changes as the slider is 
moved along the bar.
• To cancel brightness adjustment, 
press the DISP. button to cancel the setting and return to the shooting 
menu.
4When you reach the desired brightness, press the ADJ./
OK button.
• The display returns to the setup menu.
5Press the MENU button or the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------When [LCD Auto Dim] is set to [On] on the setup menu (GP.175), the picture display 
dims to conserve battery power if the camera is not moved for approximately five 
seconds. Move the camera or press any button to return to the original picture display 
brightness.
Adjusting the Brightness of the 
Picture Display (LCD Brightness)
Ok Cancel
Downloaded From camera-usermanual.com Ricoh Manuals