Ricoh Projector PJ X3241N User Manual

41

Operations


 How to register user logo
1 Project a picture to register.
2 Select [User logo] in the Display setting menu, and press the  or 
 button.
3 Select  from the displayed menu list and press 
the  button.
4 The registration area is displayed for confirmation. Select [OK] 
and press the  button.
If the picture does not fall within the display area, use the computer to scroll 
the screen.
5 Select [Yes] to register and press the  button.
6 Registration starts.
A message is displayed while...

4

The default setting menu
This menu shows placement status and other settings.
Default setting 1 menu
Item  Description
Auto keystoneAlways corrects keystone distortion automatically.  On  Off
No signal power offSets the time to wait for the power to be turned off after the last operation is 
made with no input signal. Off (not turned off)  30 min.
Auto input searchSets whether the input with signals is only selected or not.
 On  Off
Network input detectionSets how to detect the Network input...

43

Operations

[Voice guide]Even  when  you  set  the  [Voice  guide]  to  [Off],  it  still  informs  you  of  the  abnormal conditions.
[Power on]If  [Power  on]  is  set  to  [Auto]  and  there  is  a  power  outage,  the  projector  will  come  on once power is restored.
[Network standby]When [Network standby] is set to [On], the network is switched to the standby state as the projector enters standby. While the network is in standby, the projector can be powered on using the remote control...

44

[Remote control]
Sets a remote control code from  types. You can set each code respectively for up to   
projectors. The factory setting is [1].
To switch codes, set the same code for the projector and the remote control.
A remote control code is applied after the setting is done.
You cannot operate the remote control if the codes of the projector and the remote 
control do not match.
Remote control code setting for remote control
Set the same remote control code switch as the projector....

45

Operations

Displaying Information (Status display)
This displays information about the input signal, lamp use time, etc.
“Yes”:    displayed, “No”: not displayed
ItemDescriptionComputerY/PB/PRHDMIVideoS-videoNetworkUSB memory
InputInput source nameYesYesYesYesYesYesYes
Mode nameRGB or HDMI signal mode [Note 1]YesNoYesNoNoNoNo
ResolutionResolution (in dots)YesNoYesNoNoNoNo
FrequencySync frequencyYesNoYesNoNoNoNo
SyncSync signal polarity [Note ]YesNoNoNoNoNoNo
Signal formatY/PB/PR signal...

46

Before connecting via a network
Check your computer’s Operating System before you connect a projector 
with your computer via a network. 
This projector supports the Network Projector function of Windows Vista® and Windows® 7 
features.
•  If your computer’s Operating System is 
Windows  Vista® or Windows® 7, and you intend 
to use the Network Projector function for network connection, see “Connection using 
the Network Projector (Windows  Vista® or Windows® 7)” p.46, “Setting up the 
Network...

47

Network/ 
USB memory

3) Displaying a video image saved on a computer via the projector
Video files can be sent to the projector for image display. As well, the sound 
stored in the video file is sent to the projector.
4) Displaying computer’s screens via projectors using the 
Multiscreen function 
This function allows users to display multiple screens by sending data to different 
projectors from a single computer by setting up the virtual displays on the computer.
You can also send only the...

48

How to use the USB terminal
This projector can connect to a commercial USB memory device and a USB memory card 
reader/writer that are USB.0 compliant, a digital camera or the like and display the JPEG 
and MPEG files saved in those devices. p.49
(Ricoh does not guarantee the operation of all USB .0-compliant devices.)
To connect or disconnect a USB device, use the following procedure:
Connecting USB device
Plug in the USB device.
Make sure the orientation is correct then plug in the USB...

49

Network/ 
USB memory

USB memory devices
This projector can read JPEG, MPEG1, and MPEG (PS) files stored in a USB memory 
device and display them on the screen.
This allows you to give presentations without a computer, create an advertising screen 
board using the slideshow function, and more. (The projector cannot reproduce 
animation effects such as those produced by Microsoft® PowerPoint®.)
 The USB terminal
The USB terminal of the projector is USB.0 compliant and can connect with a...

50
Setup using the Setting display (2)
 
Projector settings (Be sure to read this subsection.)
Using the factory settings as-is may suffer security damage, so be sure to change 
the projector settings.
1. Press the MENU button twice
2. Select a Category
3. Make settings
Select a category by using
           .
The following 5 categories are available:
Displays the current settings 
of selected category.
Item shown in gray cannot 
be set with the currently set 
conditions of the projector.p.51...