Ricoh Projector PJ X3241N User Manual

31

Operations

Using handy features
Using auto setting (For computer input only)
This function automatically sets up the projector to the optimum state. 
It sets up the sampling phase, frequency and screen position, etc., for 
each type of input signal through a simple operation.
 Press the remote control’s AUTO SET button.
The  icon will appear during processing.
You can also set it by selecting [Auto setting] in the Image 
adjustment menu p.37.
 Notes
The image may not be projected or auto...

3

Resizing image
The projected image can be resized (zoomed in/out).
 Press the remote control’s RESIZE  button.
Each time you press the RESIZE  button, zoom ratio is up. You can keep 
pressing it to enlarge the image further.
 To zoom out, press the remote control’s RESIZE 
 button.
Each time you press the RESIZE  button, zoom ratio is 
down. You can keep pressing it to reduce the image further.
(However, the image cannot be smaller than the original 
size.)
 To move the area to zoom in, use the...

33

Operations

Cutting off the picture and sound temporarily 
(Mute)
When you want to project the images of another projector or overhead 
projector temporarily, this projector’s images and sound can be turned 
off using the MUTE button.
 Press the remote control’s MUTE button or the RETURN/
MUTE button on the projector control panel.
The picture and sound are cut off. (Pressing the MUTE button or 
the RETURN/MUTE button again cancels the Mute function and 
restores the picture and sound.)
The...

34

 Notes
Thru display is available for Computer (including HDMI-input images) and Network-
input images.
Wide or 4:3 zoom display is available for Y/PB/PR (including HDMI-input images), 
Video and S-video-input images.
[Screen size] of the Display setting menu has the same function p.39 p.40.
Using this function on commercial video software, broadcast or cable-broadcasting 
except for the purpose of your private viewing and listening may infringe the 
copyright protected by the copyright laws....

35

Operations

 How to set password (from [Off] to [On])
1 Select [Password] in the Default setting 2 menu and press the  or  
button.
2 Select [Password setting] and press the  or  button.
3 Select [On].
4 Select [OK] and press the  button.
The password entry screen is displayed.
5 Enter the password using the numeric keys of the remote control.
6 The password setting will be set as [On].
  How to operate when password is [On]
1 Turn on the power.
2 The lamp lights and the password entry screen...

36
Using the menus 1
You can call up on-screen menus, and conduct a number of adjustments and settings using 
the MENU button p.16 on the control panel of the main unit and remote control.
Setup using the Setting display
The menu shown below is for operation instructions purposes and might differ from the 
actual display.
These marks signify that there are options. Press        or         to display a list of options.
* When no item is changed, press       .
These marks signify that there are setting...

37
Operations
The image adjustment menu
Use this menu to set or adjust image related items. Items that can be set or adjusted 
are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it 
indicates that you cannot select it using the current input.)
Item  DescriptionComputerY/PB/PRHDMIVideoS-videoNetworkUSB memory
ContrastAdjust the image contrast.
  Lower 
 HigherYesYesYesYesYesYesYes
BrightnessAdjust the brightness of the image.
  Darker  BrighterYesYesYesYesYesYesYes...

38

Item  DescriptionComputerY/PB/PRHDMIVideoS-videoNetworkUSB memory
PositionPress  then change mode using   and adjust with YesNoNoNoNoNoNo
 PhaseAdjust to eliminate flicker.YesNoNoNoNoNoNo
 Frequency Adjust to eliminate periodic patterns and flickering when many fine vertical lines appear on the screen.
YesNoNoNoNoNoNo
 H-position Adjust the horizontal position of the image.
YesNoNoNoNoNoNo
 V-positionAdjust the vertical position of the image.
YesNoNoNoNoNoNo
 Clamp 1Adjusts the clamp pulse...

39

Operations

The display setting menu
Use this menu to set screen display related items.
(The items in gray color cannot be set with the current input selection.)
Item  Description
Screen sizeScreen size setting
[ or : Enter setting]  [:Selection]  [Enter: ]
X3241N  : Normal/Full/Thru/Wide
WX3231N  : Normal/Full/Thru/4:3 zoom
Up/down shiftAllows the projected images to shift vertically when the screen size setting is selected Wide for X341N (within the range of 104 x 768) and 4:3 zoom for...

40

 Detailed description
[Screen size]
Normal•:Enlarges an input image to fit the screen without changing the aspect \
ratio of video signals.
Full•: Displays an input image in 104 × 768 dot resolution by enlarging it to 
fill the entire screen. (X341N)
Displays an input image in 180 x 800 dot resolution by enlarging it to 
fill the entire screen. (WX331N)
Thru•:Displays an input image in the native resolution of the video signals. Thru display is not available for Y/PB/PR, HDMI...