Ricoh Projector PJ WXL6280 User Manual

61
Setup Menu
SETUP
Language
Ceiling Moun t
Rear Projection
Lens Function
Menu Preferences
Keypad LED Setting s
Pin
Communications Englis
h
Auto Off
On
PICTURE
OUTPUT SETUP
OPTION
Language
This item allows you to select an available language for the OSD display.
Ceiling Mount
Turn the image upside down for ceiling-mounted projection.
Rear Projection
Reverse the image so you can project from behind a translucent screen.
Lens Function
• Focus: Adjust focus function on the projected image.
• Zoom: Adjust...

62
Pin
• PIN Protect: The PIN (personal identification number) feature allows you to 
password protect your projector. Once you enable the PIN feature, you must 
enter the PIN before you can project an image. (PIN Default : 12345)
• Change PIN: This item allows you to change the PIN.
Communications
• LAN:
 -DHCP: Turn the DHCP ON/OFF.
 -IP Address: Assign Network IP Address.
 -Subnet Mask: Assign Network Subnet Mask.
 -Default Gateway: Assign Network Default Gateway.
 -MAC Address: Display the network...

63
Option Menu
OPTION
Auto Source
High Altitude
Test Pattern
Background Colo r
Hot-Key settings
Power Setting s
Light Source Setting s
Light Sensor
Information
Factory Reset
PICTURE
OUTPUT SETU P
OPTION On
Off
Off
Logo
Blank Screen
OPTION (1/2)
OPTION
Service
PICTURE
OUTPUT SETU P
OPTION
OPTION (2/2)
Auto Source
• Off: The projector will only search current input connection.
• On: The projector will search for other signals if the current input signal is lost.
High Altitude
When “On” is selected, the...

64
Test Pattern
Choose the desired internal test pattern to display, or select Off to turn off a test 
pattern.
Background Color
Use this feature to display a “Logo”, “Blue”, “Black” or “White” screen when no 
signal is available.
Hot-Key settings
Assign a different function to the hot-key on the remote control by highlighting the 
function in the list and pressing ENTER. Choose a function that does not already 
have a dedicated button, and assign the hot-key to that function, allowing you to 
quickly...

65
Light Sensor
• Light Sensor Calibration: Calibrate the Light Sensor for use with the Constant 
Luminance mode, which allows the projector to be set for constant brightness. 
If the Light Sensor has not been calibrated, Constant Luminance mode will be 
disabled.
• Constant Power Settings
 -Yes: Light Sensor has been calibrated.
 -No: Light Sensor has not been calibrated.
Information
Display the projector information for source, resolution, and software version on the 
screen.
Factory Reset
Restore all...

66
Troubleshooting
Appendices
If you experience a problem with your projector, please refer to the 
following information. If a problem persists, please contact your local \
reseller or service center.
Image Problems
  No image appears on-screen
 `Ensure all the cables and power connections are correctly and securely 
connected as described in the “Installation” section.
 `Ensure the pins of connectors are not crooked or broken.
 `Make sure you have removed the lens cover and the projector is switched...

67
 `If you are using a Notebook:
 -First, follow the steps above to adjust resolution of the computer.
 -Press the toggle output settings. example: [Fn]+[F4] 
Notebook BrandFunction  Keys
Acer[Fn]+[F5]
Asus[Fn]+[F8]
Dell[Fn]+[F8]
Gateway[Fn]+[F4]
IBM/Lenovo[Fn]+[F7]
HP/Compaq[Fn]+[F4]
NEC[Fn]+[F3]
Toshiba[Fn]+[F5]
Mac AppleSystem Preference -> Display -> Arrangement -> Mirror display
 `If you experience difficulty changing resolutions or your monitor freezes, 
restart all equipment including the...

68
  The image is stretched when displaying 16:9 DVD title
 `When you play anamorphic DVD or 16:9 DVD, the projector will show the 
best image when the projector display mode is set to Auto in the OSD.
 `If you play 4:3 format DVD titles, please change the format to 4:3 in the 
projector OSD.
 `If the image is still stretched, you will also need to adjust the aspect ratio by 
referring to the following:
 `Please setup the display format as 16:9 (wide) aspect ratio type on your 
DVD player.
  Image is too...

69
Projector Problems
 
 The projector stops responding to all controls
 `If possible, turn off the projector, then unplug the power cord and wait at 
least 60 seconds before reconnecting power.
 `Check that “Keypad Lock” is not activated by trying to control the projector 
with the remote control.
 
 If the remote control does not work
 `Check if the operating angle of the remote control is within ±30° both  
horizontally and vertically on one of the IR receivers on the projector.\
 `Make sure there is...

70
Step 4: On the General tab, under This connection use the following 
items, click Internet Protocol(TCP/IP), and then click “Properties”.
Step 5: Click Use the following IP address, and type in as below:
1) IP address: 192.168.0.101
2) Subnet mask: 255.255.255.0
3) Default gateway: 192.168.0.254