Ricoh Projector PJ WXC1110 User Manual

19
Product Overview
1. Control panel
2. Focus ring
3. Lens
4. Adjustable feet
5. Lens cap
6. Ventilation (inlet) 
7. Infrared remote sensor
8. Connection ports
9. Ventilation (outlet) 
1
7
6
5
3
2
8
4
9
English 
English
Introduction
English             

20
Connection Ports
1.  Anti-theft lock hole
2.   MicroSD card slot
3.  USB Type A terminal
4.  DC IN pluged jack
5.  Headphone jack
6.  HDMI / MHL terminal
7.  Computer In terminal
123
4567 
English
Introduction   

21
Control Panel
1PowerRefer to the “Power On/Off the 
Projector” section. Please see pages 
28~29.
2Temp IndicatorIndicate the projector’s temperature 
status.
3Error IndicatorIndicate the projector’s error status.
4MenuPress the  button to launch the 
Onscreen display (OSD).
5Four  
Directional 
Select Keys
Use , , , or  to select items or 
make adjustments to your selection.
6EnterConfirm your section of items in sub 
menu operation. 
6
5
3
2
1
4
English 
English
Introduction
English     

22
InputAspect
Power
PictureAV Mute
ExitMenu
Magnify
Remote Control
1Power Turns the projector on/off.
2AV MuteMutes/unmutes audio and/or video 
depending on the chosen mute option 
in the OSD menu (“Menu” > “Setup” 
> “Advanced” > “Mute”).
3MenuTurns the main menu on/off or 
returns to upper level in the menu 
operations.
4RewindSearches backward.
5Play/Pause Plays/pauses media file.
1
2
3
4
6
7
8
9
11
12
14
10
13
5 
English
Introduction     

23
6Moving modeEnters Moving mode
7InputSelect Input sources
8AspectSelects Aspect among Auto, 4:3,16:9, 
16:10.
9PictureSelect Picture mode.
10    Uses to operate menu.
11ExitReturns to the previous page.
12EnterConfirms your section of items in 
menu system.
13Fast ForwardSearches forward.
14MagnifyScaling the image.
English 
English
Introduction
English   

24
Remote Control Battery Installation
Remove the battery holder by holding down the side release firmly and pulling out the battery holder.
1Replace the battery holder.3Remove the old battery and install new one (CR2025). Ensure that the side with a “+” is facing up.
2
To ensure safe operation, please observe the following precautions :
■  Never throw batteries into a fire.
■ Do not ingest battery, Chemical Burn Hazard.
■ Keep new and used batteries away from children.
For more detailed information,...

25
Remote Control Operating Range
■  When pointing the remote control directly toward the projector (Remote \
control signal 
receiver), operating range for the remote control is within 3m (9.84 f\
t). Also, operation 
range available for four directions (up, down, left, right to the proje\
ctor) is ± 30° and the 
operation distance may become short.
■  If there are any obstacles between the remote control and the remote con\
trol signal 
receiver, the remote control may not operate correctly.
■  When...

26
Connecting the Projector
		To ensure the projector works well with your computer, 
please make sure the timing of the display mode is 
compatible with your projector. Please see page 76.
		Use the cables that come with the projector.
1.........................................................................\
........................................RGB Cable2.........................................................................\
........... HDMI Cable(not supplied)...

27
		To ensure the projector works well with your computer, 
please make sure the timing of the display mode is 
compatible with your projector. Please see page 76.
1.........................................................................\
..........MHL Cable(not supplied)(*)2.........................................................................\
............HDMI Cable(not supplied)3.........................................................................\
...MicroSD Card(not...

28
Powering On the Projector
1. Ensure that the power cord, AC adapter, and signal cable are 
securely connected. The Power indicator will start flashing 
amber.
2.   Remove the lens cap. 
3.   Turn on the projector by pressing “Power” on the control 
panel or the remote control. 
 The startup screen will display in approximately 3 seconds. 
After the screen disappears, the Power indicator will turn 
blue. 
 The first time you use the projector after purchase, the 
language menu is displayed after the...