Ricoh Projector PJ WXC1110 User Manual

39
 Picture Mode
There are factory presets optimized for various types of images.
   Bright: For displaying the maximum brightness from computer 
input.
   PC: For computer.
     sRGB: Based in sRGB.
   Wide1: Close to Adobe RGB.
   Wide2: Widest color gamut.
   Eco: For displaying in Eco mode.
The default value of Brightness, Contrast, Color Temperature, Hue, 
and Saturation depend on Picture mode.
Default value of each mode as follows.
 Brightness
 Adjust the brightness of the image. 
   Press...

40
 Image
   Go to “Image” sub menu. 
 Display
   Go to “Display” sub menu. 
 Setup
   Go to “Setup” sub menu.  
English
User Settings   

41
 Saturation 
Adjust a video image from black and white to saturated color.
   Press the  to increase the intensity of the color (up to 20).
   Press the  to decrease the intensity of the color (minimum 
value 0).
 Hue 
Adjust the skin tone.
   Press the  to adjust the color to be greenish (up to 10).
   Press the  to adjust the color to be reddish (minimum value 
-10).
 Aspect Ratio
  Use this function to choose your desired aspect ratio.
   Auto: The projector displays the image by automatically...

42
 Zoom
   Adjust the magnification of the image. Magnification can be set 
50%, 75%, 100%, 125%, 150%, 175%, or 200%.
 Color Temperature
   Select the color temperature. 
   Warm: The screen image looks warmer.
   Medium: The medium color temperature.
   Cold: The screen image looks colder.
  Color Space
   Select an appropriate color matrix type from “Auto”, “RGB”, \
and 
“YCbCr”. 
 Frequency
   Adjust to achieve an optimal image when there is a vertical 
flickering in the image.
 Phase
   Adjust...

43
 Auto Keystone
   Automatically adjust image distortion caused by tilting the 
projector.
 Keystone
   Manually adjust image distortion caused by tilting the projector.
 Projection
   Select the projection mode, depending upon how the projector is 
mounted.
   Auto Keystone: On
   -   No reverse
  -   Left/Right reverse
   Auto Keystone: Off
   -   No reverse
  -   Left/Right reverse
  -   Up/Down reverse
  -   Left/Right and Up/Down reverse
Display
Display
OnAuto Keystone
Keystone
Projection...

44
Setup
 Language 
The language used in the On-Screen Menu is available in English, 
Germany, French, Italian, Spanish, Portuguese, Polish, Dutch, 
Russian, Swedish, Greek, Traditional Chinese, Simplified Chinese, 
Japanese, Korean, and Turkish.
 Boot-up Source
   Set the projector’s boot-up source between “Auto”, “Computer”, 
“HDMI/MHL”, and “Media”.
 Direct Power On
   When enabled, the projector will automatically power on when 
AC power is supplied, without pressing the “Power” button on 
the...

45
 Security
 Go to “Security” sub menu. To change the security setting, enter 
the security code in 6 digits.
 The default password is       .(Enters with 4 directional key)
Security
Enter a password. (6 Digits)Exit
 Reset
   Return all data to the factory defaults. After choosing this option, 
a confirmation message appears on the screen. Select “Yes” to 
confirm or “No” to cancel reset.
Reset
Reset?
No Ye s
 Software Ver.
   View the current projector’s firmware version.
Note
Password is not reset by...

46
 Mute 
Select the “Mute” mode between “AV Mute” (mute both audio 
and video), “Audio” (mute audio only), and “Video” (mute\
 video 
only).
 3D
Use this funciton to set the display mode of the 3D image. Please 
note that this projector supports only DLP Link 3D signal. Blu-ray 
3D is not supported.
  On: Turn on “3D” image display.
  Off: Turn off “3D” image display.
 3D Sync. Invert
Flips the timing of the switch between the left and right of an 
image to display. Change the setting if the 3D images...

47
 Security 
Select the “Security” mode.  
  On: Use the security verification when turning on the Protector.
  Off: Disable to use security verification.
 Change Password
Change the password. Press "Enter".
  Enter New Password (6 digits): 
Use 4 directional keys to enter new password.
Enter the new password. (6 Digits)
Change Password
Exit
  Confirm New Password (6 digits): 
Enter the same password that you entered.
Change Password
Enter the password again. (6 Digits)
Exit
Security...

48
If the confirmed Password doesn not match with the entered 
Password, Input the new Password again.
By entering “Menu” key, you can cancel the “Change 
Password”menu. 
English
User Settings