Ricoh Projector PJ WXC1110 User Manual

49
Multi-Media Introduction
The supported multi-media format is as follows: 
Photo Format
File Format(Ext Name)Sub TypeEncode TypeMax Size
Jpeg / Jpg
Baseline
YUV420
6000x4000=24,000,000 pixelYUV422
YUV440
YUV444
Progressive
YUV420
6000x4000=24,000,000 pixelYUV422
YUV440
YUV444
BMP6000x4000=24,000,000 pixel
Video Format
File FormatVideo Codec
Decode Max. Resolution
Max Bit Rate (bps)
Audio CodecProfile
MPG, MPEGMPEG1/21920 x 1080 30fps30M bpsMPEG1 L1-3,LPCM
AVI, MOV, MP4, MKVH.2641920 x 1080 30fps30M...

50
Audio Format
File Format (Ext Name)Sample Rate (KHz)Bit Rate (Kbps)
MP38-488-320
WMA8-485-320
WAV(ADPCM-WAV)8-4832-384
WAV(PCM-WAV)8-48128-1536
AAC8-488-320
M4A8-488-320
Office Viewer Format
File FormatSupported VersionPage/Lines LimitationSize Limitation
Adobe PDFPDF 1.0, 1.1, 1.2, 1.3, 1.4Up to 360 pages (One File)Up to 32MB
Microsoft Word
British Word 95Because office viewer does not load all pages of MS/Word file at the same time, there are not abvious limitations of page and line.
Up to...

51
Follow these steps to playback the Photo, Video, or Music files from the USB flash disk, Micro SD-Card, and Internal Memory.
1.   Power  on Turn the projector on. Please see page 28.
2.   Set  Media Plug in a USB flash disk to your projector.  Plug in a Micro SD-Card to your projector. 
  The Multi-Media menu opens. If Multi Media menu does not open, set the input source to Media. Please see page 38.   
3.   Media  Menu Select the “Media” menu.
Connect to PCMedia
How to use Multi-Media projection with...

52
The “Media” menu opens. 
Internal MemorySD CardUSBSettings
4.		 Select	the	file	type Access the “Internal Memory”, “SD Card”, or “USB”menu.\
 Select the multimedia file(s) in one of the following folders: “Photo”, 
“Video”, “Music”, or “Office”.
Internal Memory SD Card
USBSettings
Photo Video
Music Office
The maximum allowed file name length is 28 characters.
Note 
English
Multi Media Operation   

53
5.		 Select	the	file  5.1  Photo  When “Photo” is selected, the image data and folder with image format data will be displayed. The folder without image data will not be displayed. Select the folder you want to display by using the four directional keys and then press “Enter”.  If you press , it returns to the upper folder or exits the folder.
Photo
 Choose the Thumbnail of the file and press “Enter”.
Photo
English 
English
Multi Media Operation
English   

54
The image is displayed full screen.
 Control Command bar icons are displayed at the bottom of the screen. If the Control Panel or Remote Control has not been in use, the Control Command bar will disappear within 3-5 seconds. The Control Command bar will also disappear if you press “Exit” key on\
 the Remote Control. If you want to display the Control Command bar, press “Enter” key.\
  *Control the Slideshow by using the Control Command bar icons  You can choose the icon by using   keys on the Control...

55
*Control Slideshow without using the Control Command bar icons If the Control Command icons are not displayed, you can move to the next or previous image by using   keys. 
You can exit Slideshow by pressingExitkey on the Remote Control. 
  5.2  Video  After “Video” tab is selected, the video filename and folder with video data will be displayed. The folder without video data will not be displayed. Select the Video data or folder that you want to play by using   keys and then press “Enter”. If you...

56
Choose the Filename and press “Enter”. The video playback begins.
Control Command bar icons are displayed at bottom of the screen. If the the Control Panel or Remote Control has not been in use, the Control Command bar will disappear within 3-5 seconds. The Control Command bar will also disappear if you press “Exit” key on\
 the Remote Control. If you want to display the Control Command bar, press “Enter” key.\
  
*Control the video playback by using the Control Command bar icons. You can choose the...

57
 *Volume control When video is played, volume can be changed by using   keys.  *Control playback without using the Control Command bar icons Video playback can be controlled by using the following buttons on the Remote Control.   : Pauses & Plays the video   : Rewinds the playback (rewind speed changes in 3 steps)   : Forwards the playback (forward speed changes in 3 steps)   Exit: Stops the playback and goes to the file list   5.3 Music  After “Music” tab is selected, the music filename and folder...

58
Choose the Filename and press “Enter”. Then music playback begins.\
Music
Control Command bar icons are displayed at bottom of the screen. Icon are permanently visible as long as the music playback window is opened.   *Control the music playback by using the Control Command bar icons. You can choose the icon by using   keys on the Control Panel or Remote Control, and press “Enter”.   : Goes to the previous music file  : Rewinds the playback  
English
Multi Media Operation