Ricoh Projector PJ WX6170N User Manual

128
5. Using On-Screen Menu
18.	After	co\fpleting	required	settings,	select	[OK]	and	press	the	Enter	\button.
  The [WIRELESS LAN] page will be retur\bed.
19.	Select	[RECONNECT]	and	press	the	Enter	\button.
20.	Select	[OK]	and	press	the	Enter	\button.
This	will	complete	setting	[PEAP-MSCHAPv2]	\bo\f	[EAP	 TYPE]	in	[WPA-EAP]	o\f	[WPA2-EAP].
TIP:
Clea\fing	the	digital	ce\ftificate	that	is	installed	on	the	p\fojecto\f
To	clea\f	the	digital	ce\ftificate	installed	on	the	p\fojecto\f,	\bollow	the	steps	below....

129
5. Using On-Screen Menu
WPS
When	 the	wi\feless	 LAN	access	 point	connected	 to	the	 p\fojecto\f	 suppo\fts	WPS	(Wi-Fi	 P\fotected	 Setup	TM),	you	can	
use	PIN	method	o\f	push	button	method	to	set	up	the	wi\feless	LAN	\bo\f	the	p\fojecto\f.
PIN	 TYPE Set	a	4-digit	 o\f	8	digit-PIN	 code	o\b	WPS	 \bo\f	you\f	 access	 point	to	complete	 setting	\bo\f	the	
SSID	secu\fity.
PUSH	BUTTON	 TYPEP\fess	the	dedicated	 button	o\b	the	 access	 point	and	the	p\fojecto\f’s	 wi\feless	LAN	unit	to	
complete	setting...

130
5. Using On-Screen Menu
PROJECTOR NAME (ADVANCED menu \fnly)
PROJECTOR	NAME Set	a	unique	p\fojecto\f	name. 	 Up	to	16	alphanu-
me\fic	cha\facte\fs	and	
symbols
DOMAIN (ADVANCED menu \fnly)
Set	a	host	name	and	domain	name	o\b	the	p\fojecto\f.
HOST	NAMESet	a	host	name	o\b	the	p\fojecto\f. Up	to	15	alphanume\fic	
cha\facte\fs
DOMAIN	NAME Set	a	domain	name	o\b	the	p\fojecto\f. Up	to	60	alphanume\fic	
cha\facte\fs 

131
5. Using On-Screen Menu
ALERT MAIL (ADVANCED menu \fnly)
ALERT	MAIL This	option	 will	noti\by	 you\f	compute\f	 o\b	lamp	 \feplace	 time	o\f	e\f\fo\f	
messages	via	e-mail	when	using	wi\feless	o\f	wi\fed	LAN. 	
Placing a checkmark \Pwill turn on the A\Plert Mail feature�
Clearing a checkmar\Pk will turn off th\Pe Alert Mail featu\Pre�
Sample	o\b	a	message	to	be	sent	\b\fom	the	p\fojecto\f:
The	 lamp	 and	filte\fs	 a\fe	at	the	 end	 o\b	its	 usable	 li\be.	Please	
\feplace	the	lamp	and	filte\fs....

132
5. Using On-Screen Menu
NETWORK SERVICE (ADVANCED menu \fnly)
HTTP	SERVER Set	a	passwo\fd	\bo\f	you\f	HTTP	se\fve\f. Up	to	10	alphanume\fic	
cha\facte\fs
PJLink
The	 P\fojecto\f	 Management	 Utility	on	the	 CD-ROM	 uses	PJLink. 	
Set	a	passwo\fd	\bo\f	PJLink	to	use	this	utility,	i\b	necessa\fy.
NOTE: 
•  D\b n\bt f\brget y\bur passw\brd. H\bwe\fer, if y\bu f\brget y\bur passw\brd, 
c\bnsult with y\bur de\yaler. 
•  What is PJLink?
  PJLink is a standardizati\bn \bf pr\bt\bc\bl used f\br c\bntr\blling...

133
5. Using On-Screen Menu
TOOLS
ADMINISTRATOR MODE
This	allows	you	to	select	MENU	MODE,	save	settings,	and	set	a	passwo\fd	\bo\f	the	administ\fato\f	mode.
MENU	MODESelect	eithe\f	[BASIC]	o\f	[ADVANCED]	menu.
(→	page	81) —
NOT	SAVE	SETTING	
VALUES Placing a check mark\P will not \fave your\P projector \fetting\f�
Clear thi\f check box\P to \fave your proje\Pctor \fetting\f� —
NEW	PASSWORD/
CONFIRM	PASS-
WORD Assign	a	passwo\fd	\bo\f	the	administ\fato\f	mode.
Up	to	10	alphanume\fic	
cha\facte\fs
NOTE:...

134
5. Using On-Screen Menu
PROGRAM TIMER
This	option 	tu\fns 	on/o\b\b 	the 	p\fojecto\f 	and 	changes 	video 	signals, 	and 	selects 	ECO 	mode 	automatically 	at 	a 	specified 	time.
NOTE:
•  Bef\bre using [PROGR\yAM TIMER], make sur\ye that the [DATE AND TIME] featur\ye is set. (→ page 137)
•  Make sure that the\y pr\bject\br is in the\y stand by c\bnditi\bn \ywith the P\bwer c\brd\y c\bnnected.
•  The pr\bject\br has a built-in cl\bck. The cl\bck will keep w\brking f\br ab\but tw\b weeks after the...

135
5. Using On-Screen Menu
ACTIVE ������������������\P Place a check mark t\Po enable the progr\Pam�
DAY  ������������������\P������ Select day\f of the week for the program timer � To execute the program from Monday to Friday, \felect [MO\b-
FRI]�To execute the progr\Pam in everyday ba\fi\f, \felect [\PEVERY DAY]�
TIME  ������������������\P���� Set the time to ex\Pecute the program� Enter time in 24-\Phour format�
FU\bCTIO\b  �������������Select a function to be executed� Selecting [POWER] will allow...

136
5. Using On-Screen Menu
Activating	the	p\fog\fam	time\f
1.	 Select	[ENABLE]	on	the	[PROGRAM	TIMER]	screen	and	press	the	Enter	\button.
  The [ENABLE] will be \ea\ftivated.
2.	 Select	[OK]	and	press	the	Enter	\button.
  The [PROGRAM TIMER] s\free\b will be \fha\bged to the [TOOLS] s\free\b.
NOTE:
•  Clearing [ENABLE] will disable the Pr\bgram Timer e\fen when a pr\bgram is marked with a check mark \bn [PROGRAM LIST] screen. 
•  When [ENABLE] is selected, the [PROGRAM LIST] cann\bt be edited. T\b edit...

137
5. Using On-Screen Menu
DATE AND TIME
You	can	set	the	cu\f\fent	time,	month,	date,	and	yea\f.
NOTE: The pr\bject\br has a built-in cl\bck. The cl\bck will keep w\brking f\br ab\but 2 weeks after the main p\bwer is turned \bff. If the 
main p\bwer is \bff f\br 2 weeks \br m\bre, the built-in cl\bck will cease. If the built-in cl\bck ceases, set the date and time again. The 
built-in cl\bck will\y n\bt cease while in\y the standby m\bde.TIME ZO\bE SETTI\bGS  ��������������Select your time zo\Pne�
DATE...