Ricoh Projector PJ WX6170N User Manual
Here you can view all the pages of manual Ricoh Projector PJ WX6170N User Manual. The Ricoh manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 131
118 5. Using On-Screen Menu WIRED LAN \f\b WIRELESS LAN (ADVANCED menu \fnly) * To use the wi\feless LAN \bunctions, connect a sepa\fately sold wi\feless LAN unit to the p\fojecto\f. (→ page 148) PROFILES• Up to two settings \bo\f the LAN po\ft o\f USB wi\feless LAN unit can be sto\fed in memo\fy o\b the p\fojecto\f. Total o\b \bou\f settings can be sto\fed. Five settings can be sto\fed: two \bo\f the built-in LAN po\ft, two \bo\f wi\feless LAN and one \bo\f WPS. • Select...
Page 132
![Page 132
119
5. Using On-Screen Menu
PROFILES• When selecting [WPS], the netwo\fk will be connected by using
settings sto\fed automatically with the WPS \bunction.
Selecting [WPS] will allow the p\fojecto\f to access the netwo\fk
by using the settings the WPS \bunction automatically sto\fed. —
DHCP Place a check ma\fk to automatically assign an IP add\fess to the
p\fojecto\f \b\fom you\f DHCP se\fve\f.
Clea\f this check box to \fegiste\f the IP add\fess o\f subnet mask
numbe\f obtained...](http://img.usermanuals.tech/thumb/64/99379/w300_projector_manual_7749_d-131.png "Page 132
119
5. Using On-Screen Menu
PROFILES• When selecting [WPS], the netwo\fk will be connected by using
settings sto\fed automatically with the WPS \bunction.
Selecting [WPS] will allow the p\fojecto\f to access the netwo\fk
by using the settings the WPS \bunction automatically sto\fed. —
DHCP Place a check ma\fk to automatically assign an IP add\fess to the
p\fojecto\f \b\fom you\f DHCP se\fve\f.
Clea\f this check box to \fegiste\f the IP add\fess o\f subnet mask
numbe\f obtained...")
119 5. Using On-Screen Menu PROFILES• When selecting [WPS], the netwo\fk will be connected by using settings sto\fed automatically with the WPS \bunction. Selecting [WPS] will allow the p\fojecto\f to access the netwo\fk by using the settings the WPS \bunction automatically sto\fed. — DHCP Place a check ma\fk to automatically assign an IP add\fess to the p\fojecto\f \b\fom you\f DHCP se\fve\f. Clea\f this check box to \fegiste\f the IP add\fess o\f subnet mask numbe\f obtained...
Page 133
![Page 133
120
5. Using On-Screen Menu
SITE SURVEYDisplays a list o\b available SSIDs \bo\f wi\feless LAN on site. Select
an SSID which you can access.
To select an SSID, highlight [SSID] and use the to select [OK]
and p\fess the Ente\f button.
������������������\P����� Wirele\f\f acce\f\f point\P
������������������\P����� Ad Hoc PC
������������������\P����� WEP or WPA enabled —
SECURITY
This will tu\fn on o\f o\b\b the enc\fyption mode \bo\f secu\fe t\fansmission.
To use...](http://img.usermanuals.tech/thumb/64/99379/w300_projector_manual_7749_d-132.png "Page 133
120
5. Using On-Screen Menu
SITE SURVEYDisplays a list o\b available SSIDs \bo\f wi\feless LAN on site. Select
an SSID which you can access.
To select an SSID, highlight [SSID] and use the to select [OK]
and p\fess the Ente\f button.
������������������\P����� Wirele\f\f acce\f\f point\P
������������������\P����� Ad Hoc PC
������������������\P����� WEP or WPA enabled —
SECURITY
This will tu\fn on o\f o\b\b the enc\fyption mode \bo\f secu\fe t\fansmission.
To use...")
120 5. Using On-Screen Menu SITE SURVEYDisplays a list o\b available SSIDs \bo\f wi\feless LAN on site. Select an SSID which you can access. To select an SSID, highlight [SSID] and use the to select [OK] and p\fess the Ente\f button. ������������������\P����� Wirele\f\f acce\f\f point\P ������������������\P����� Ad Hoc PC ������������������\P����� WEP or WPA enabled — SECURITY This will tu\fn on o\f o\b\b the enc\fyption mode \bo\f secu\fe t\fansmission. To use...
Page 134
![Page 134
121
5. Using On-Screen Menu
When [WEP(64bit)] \f\v\b [WEP(128bit)] is selected f\f\b [SECURITY TYPE]
KEY SELECT Selects one WEP key \b\fom the \bou\f keys below.
KEY1, KEY2, KEY3,
KEY4 Ente\f a
WEP key.
• Maximum numbe\f o\b cha\facte\fs
Option Alphanume\fic (ASCII)Hexadecimal (HEX)
WEP 64bit 510
WEP 128bit 1326
When [WPA-PSK], [WPA-EAP], [WPA2-PSK], \f\b [WPA2-EAP] is selected f\f\b [SECURITY TYPE]
ENCRYPTION TYPESelect [TKIP] o\f [AES].
KEY Ente\f enc\fyption key. Key length must be 8 o\f g\feate\f...](http://img.usermanuals.tech/thumb/64/99379/w300_projector_manual_7749_d-133.png "Page 134
121
5. Using On-Screen Menu
When [WEP(64bit)] \f\v\b [WEP(128bit)] is selected f\f\b [SECURITY TYPE]
KEY SELECT Selects one WEP key \b\fom the \bou\f keys below.
KEY1, KEY2, KEY3,
KEY4 Ente\f a
WEP key.
• Maximum numbe\f o\b cha\facte\fs
Option Alphanume\fic (ASCII)Hexadecimal (HEX)
WEP 64bit 510
WEP 128bit 1326
When [WPA-PSK], [WPA-EAP], [WPA2-PSK], \f\b [WPA2-EAP] is selected f\f\b [SECURITY TYPE]
ENCRYPTION TYPESelect [TKIP] o\f [AES].
KEY Ente\f enc\fyption key. Key length must be 8 o\f g\feate\f...")
121 5. Using On-Screen Menu When [WEP(64bit)] \f\v\b [WEP(128bit)] is selected f\f\b [SECURITY TYPE] KEY SELECT Selects one WEP key \b\fom the \bou\f keys below. KEY1, KEY2, KEY3, KEY4 Ente\f a WEP key. • Maximum numbe\f o\b cha\facte\fs Option Alphanume\fic (ASCII)Hexadecimal (HEX) WEP 64bit 510 WEP 128bit 1326 When [WPA-PSK], [WPA-EAP], [WPA2-PSK], \f\b [WPA2-EAP] is selected f\f\b [SECURITY TYPE] ENCRYPTION TYPESelect [TKIP] o\f [AES]. KEY Ente\f enc\fyption key. Key length must be 8 o\f g\feate\f...
Page 135
![Page 135
122
5. Using On-Screen Menu
[AUTHENTICATION] (\bequi\bed f\f\b wi\beless \fnly)
Setting is \fequi\fed \bo\f using WPA-EAP o\f WPA2-EAP.
P\fepa\fation be\bo\fe setting
Select a wi\feless LAN compliant WPA-EAP o\f WPA2-EAP authentication and install a digital ce\ftificate on the p\fojecto\f.
1. Set [DATE AND TIME] on the projector. (→ page 137)
2. Use a co\fputer to save digital certificates (files) for WPA-EAP or WPA2-EAP setting to your USB \fe\fory
device.
After...](http://img.usermanuals.tech/thumb/64/99379/w300_projector_manual_7749_d-134.png "Page 135
122
5. Using On-Screen Menu
[AUTHENTICATION] (\bequi\bed f\f\b wi\beless \fnly)
Setting is \fequi\fed \bo\f using WPA-EAP o\f WPA2-EAP.
P\fepa\fation be\bo\fe setting
Select a wi\feless LAN compliant WPA-EAP o\f WPA2-EAP authentication and install a digital ce\ftificate on the p\fojecto\f.
1. Set [DATE AND TIME] on the projector. (→ page 137)
2. Use a co\fputer to save digital certificates (files) for WPA-EAP or WPA2-EAP setting to your USB \fe\fory
device.
After...")
122 5. Using On-Screen Menu [AUTHENTICATION] (\bequi\bed f\f\b wi\beless \fnly) Setting is \fequi\fed \bo\f using WPA-EAP o\f WPA2-EAP. P\fepa\fation be\bo\fe setting Select a wi\feless LAN compliant WPA-EAP o\f WPA2-EAP authentication and install a digital ce\ftificate on the p\fojecto\f. 1. Set [DATE AND TIME] on the projector. (→ page 137) 2. Use a co\fputer to save digital certificates (files) for WPA-EAP or WPA2-EAP setting to your USB \fe\fory device. After...
Page 136
![Page 136
123
5. Using On-Screen Menu
4. Select [SITE SURVEY] and press the Enter \button.
The “SSID” list will be displayed.
5. Select a connecting SSID, and then select [OK].
Fi\bally press the E\bter butto\b.
• Sele\ft the SSID for whi\fh WPA-PSK or WPA2-PSK is set.
• Sele\ft [INFRASTRUCTURE (
)] for [COMMUNICATION MODE]. WPA-PSK, WPA2-PSK, WPA-EAP, or WPA2-
EAP is \bot available whe\b [ADHOC (
)] is sele\fted.
6. Select the [SECURITY] ta\b.
The [SECURITY] page will be displayed.
7. Select the...](http://img.usermanuals.tech/thumb/64/99379/w300_projector_manual_7749_d-135.png "Page 136
123
5. Using On-Screen Menu
4. Select [SITE SURVEY] and press the Enter \button.
The “SSID” list will be displayed.
5. Select a connecting SSID, and then select [OK].
Fi\bally press the E\bter butto\b.
• Sele\ft the SSID for whi\fh WPA-PSK or WPA2-PSK is set.
• Sele\ft [INFRASTRUCTURE (
)] for [COMMUNICATION MODE]. WPA-PSK, WPA2-PSK, WPA-EAP, or WPA2-
EAP is \bot available whe\b [ADHOC (
)] is sele\fted.
6. Select the [SECURITY] ta\b.
The [SECURITY] page will be displayed.
7. Select the...")
123 5. Using On-Screen Menu 4. Select [SITE SURVEY] and press the Enter \button. The “SSID” list will be displayed. 5. Select a connecting SSID, and then select [OK]. Fi\bally press the E\bter butto\b. • Sele\ft the SSID for whi\fh WPA-PSK or WPA2-PSK is set. • Sele\ft [INFRASTRUCTURE ( )] for [COMMUNICATION MODE]. WPA-PSK, WPA2-PSK, WPA-EAP, or WPA2- EAP is \bot available whe\b [ADHOC ( )] is sele\fted. 6. Select the [SECURITY] ta\b. The [SECURITY] page will be displayed. 7. Select the...
Page 137
![Page 137
124
5. Using On-Screen Menu
11. Select the [AUTHENTICATION] ta\b.
The [AUTHENTICATION] page will be displayed.
Sele\ft either [EAP-TLS] or [PEAP-MSCHAPv2] for [EAP TYPE]. The setti\bg items vary depe\bdi\bg o\b the EAP type.
See the table below.
EAP Type Setting Item Note
EAP-TLS USER NAME 1 cha\facte\f o\f mo\fe and 32 cha\facte\fs o\f
less
CLIENT CERTIFICATE PKCS#12 \bo\fmat file
CA CERTIFICATE
(Ce\ftificate autho\fity’s ce\ftificate) DER \bo\fmat file
PEAP-MSCHAPv2 USER NAME 1 cha\facte\f...](http://img.usermanuals.tech/thumb/64/99379/w300_projector_manual_7749_d-136.png "Page 137
124
5. Using On-Screen Menu
11. Select the [AUTHENTICATION] ta\b.
The [AUTHENTICATION] page will be displayed.
Sele\ft either [EAP-TLS] or [PEAP-MSCHAPv2] for [EAP TYPE]. The setti\bg items vary depe\bdi\bg o\b the EAP type.
See the table below.
EAP Type Setting Item Note
EAP-TLS USER NAME 1 cha\facte\f o\f mo\fe and 32 cha\facte\fs o\f
less
CLIENT CERTIFICATE PKCS#12 \bo\fmat file
CA CERTIFICATE
(Ce\ftificate autho\fity’s ce\ftificate) DER \bo\fmat file
PEAP-MSCHAPv2 USER NAME 1 cha\facte\f...")
124 5. Using On-Screen Menu 11. Select the [AUTHENTICATION] ta\b. The [AUTHENTICATION] page will be displayed. Sele\ft either [EAP-TLS] or [PEAP-MSCHAPv2] for [EAP TYPE]. The setti\bg items vary depe\bdi\bg o\b the EAP type. See the table below. EAP Type Setting Item Note EAP-TLS USER NAME 1 cha\facte\f o\f mo\fe and 32 cha\facte\fs o\f less CLIENT CERTIFICATE PKCS#12 \bo\fmat file CA CERTIFICATE (Ce\ftificate autho\fity’s ce\ftificate) DER \bo\fmat file PEAP-MSCHAPv2 USER NAME 1 cha\facte\f...
Page 138
![Page 138
125
5. Using On-Screen Menu
13. Select [CLIENT CERTIFICATE] and press the Enter \button.
A list of files (thumb\bail s\free\b) will be displayed.
• For operati\bg the thumb\bail s\e\free\b, see "4. Usi\bg the Viewer" i\b the “User’s Ma\bual” (PDF).
• To retur\b to the [AUTHENTICATION] page, press the Ba\fk butto\b.
NOTE:
Installing a digital ce\ftificate
Y\bu can install each\y digital certificate\y (client certificat\ye and CA certificate\y) f\br [PROFILE 1 (\b\yr 2)] \bn a file-by-fi\yle...](http://img.usermanuals.tech/thumb/64/99379/w300_projector_manual_7749_d-137.png "Page 138
125
5. Using On-Screen Menu
13. Select [CLIENT CERTIFICATE] and press the Enter \button.
A list of files (thumb\bail s\free\b) will be displayed.
• For operati\bg the thumb\bail s\e\free\b, see \"4. Usi\bg the Viewer\" i\b the “User’s Ma\bual” (PDF).
• To retur\b to the [AUTHENTICATION] page, press the Ba\fk butto\b.
NOTE:
Installing a digital ce\ftificate
Y\bu can install each\y digital certificate\y (client certificat\ye and CA certificate\y) f\br [PROFILE 1 (\b\yr 2)] \bn a file-by-fi\yle...")
125 5. Using On-Screen Menu 13. Select [CLIENT CERTIFICATE] and press the Enter \button. A list of files (thumb\bail s\free\b) will be displayed. • For operati\bg the thumb\bail s\e\free\b, see "4. Usi\bg the Viewer" i\b the “User’s Ma\bual” (PDF). • To retur\b to the [AUTHENTICATION] page, press the Ba\fk butto\b. NOTE: Installing a digital ce\ftificate Y\bu can install each\y digital certificate\y (client certificat\ye and CA certificate\y) f\br [PROFILE 1 (\b\yr 2)] \bn a file-by-fi\yle...
Page 139
![Page 139
126
5. Using On-Screen Menu
17. On the thu\f\bnail screen, select a digital certificate (DER for\fat file) saved in your USB \fe\fory device and
press the Enter \button.
• Sele\ft your root CA \fertifi\fate here.
The sele\fted digital \fertifi\fate will be i\bstalled o\b the proje\ftor.
18. After co\fpleting required settings, select [OK] and press the Enter \button.
The [WIRELESS LAN] page will be retur\bed.
19. Select [RECONNECT] and press the Enter \button.
20. Select [OK] and press...](http://img.usermanuals.tech/thumb/64/99379/w300_projector_manual_7749_d-138.png "Page 139
126
5. Using On-Screen Menu
17. On the thu\f\bnail screen, select a digital certificate (DER for\fat file) saved in your USB \fe\fory device and
press the Enter \button.
• Sele\ft your root CA \fertifi\fate here.
The sele\fted digital \fertifi\fate will be i\bstalled o\b the proje\ftor.
18. After co\fpleting required settings, select [OK] and press the Enter \button.
The [WIRELESS LAN] page will be retur\bed.
19. Select [RECONNECT] and press the Enter \button.
20. Select [OK] and press...")
126 5. Using On-Screen Menu 17. On the thu\f\bnail screen, select a digital certificate (DER for\fat file) saved in your USB \fe\fory device and press the Enter \button. • Sele\ft your root CA \fertifi\fate here. The sele\fted digital \fertifi\fate will be i\bstalled o\b the proje\ftor. 18. After co\fpleting required settings, select [OK] and press the Enter \button. The [WIRELESS LAN] page will be retur\bed. 19. Select [RECONNECT] and press the Enter \button. 20. Select [OK] and press...
Page 140
![Page 140
127
5. Using On-Screen Menu
15. After co\fpleting setting a user na\fe, select the [PASSWORD] field and press the Enter \button.
The \fhara\fter e\btry s\free\b (software keyboard) will be displayed. Set a password.
• A password must be 32 \fhara\fters or less.
16. After co\fpleting setting the password, select [CA CERTIFICATE] field and press the Enter \button.
The drive list s\free\b will be displayed.
• For operati\bg the thumb\bail s\e\free\b, see "4. Usi\bg the Viewer" i\b the “User’s...](http://img.usermanuals.tech/thumb/64/99379/w300_projector_manual_7749_d-139.png "Page 140
127
5. Using On-Screen Menu
15. After co\fpleting setting a user na\fe, select the [PASSWORD] field and press the Enter \button.
The \fhara\fter e\btry s\free\b (software keyboard) will be displayed. Set a password.
• A password must be 32 \fhara\fters or less.
16. After co\fpleting setting the password, select [CA CERTIFICATE] field and press the Enter \button.
The drive list s\free\b will be displayed.
• For operati\bg the thumb\bail s\e\free\b, see \"4. Usi\bg the Viewer\" i\b the “User’s...")
127 5. Using On-Screen Menu 15. After co\fpleting setting a user na\fe, select the [PASSWORD] field and press the Enter \button. The \fhara\fter e\btry s\free\b (software keyboard) will be displayed. Set a password. • A password must be 32 \fhara\fters or less. 16. After co\fpleting setting the password, select [CA CERTIFICATE] field and press the Enter \button. The drive list s\free\b will be displayed. • For operati\bg the thumb\bail s\e\free\b, see "4. Usi\bg the Viewer" i\b the “User’s...