Ricoh Projector PJ WX2240 User Manual

English
39
English
User Settings
 V. Position (Vertical Position)
 Shift the projected image position vertically.
  Press the  key to move the image down.
  Press the  key to move the image up.
 Digital Zoom
 Adjust the digital zoom ratio of the projected image.
  Press the  key to reduce the size of an image.
  Press the  key to magnify an image on the projection screen.
 V. Keystone
 Press the  or  key to adjust image distortion vertically. If the 
image looks trapezoidal, this option can help make...

40
English
User Settings
SETTING
 Language
 
Choose the multilingual OSD. Press “Enter” to open the sub menu 
and then use the  or  or  or  key to select your preferred 
language. Press “Enter” to finalize the selection. 
 Monitor Out (Standby)
  Enable/Disable the Monitor output function.
   On: Enable the Monitor Out function at projector standby status.
   Off: Disable the Monitor Out function at projector standby 
status.
  Reset
  Return the adjustments and settings to the factory default values....

English
41
English
User Settings
VOLUME  
(PJ X2240 / PJ WX2240)
 Mute
 
Temporarily turn off the sound.
  Choose “On” to mute the sound.
  Choose “Off” to turn mute off.
 Volume
  Adjust the volume level.
  Press the  key to decrease the volume.
  Press the  key to increase the volume.
	“Mute” function affects both internal and external speaker volume.
Note     

42
English
User Settings
OPTIONS
 Auto Source
 
When this function is turned “On”, the projector will search for 
other signals if the current input signal is lost. When this function is\
 
turned “Off”, it will only search a specified connection port.
 Input
Use this option to enable/disable input sources. Press the ► key 
to enter  the sub menu and select which sources you require. Press 
“Enter” to finalize the selection. The projector will only search for 
inputs that are enabled.
 Auto Power Off...

English
43
English
User Settings
 Lamp Settings
 
Use this option to view the lamp life status and configure the lamp 
settings. Press the ► key to enter the sub menu and configure the 
desired settings.
   Lamp Hours Used (Normal): Display the projection time.
Lamp Hours Used in Eco mode or “Image Eco” mode “On” will 
be converted to Lamp Hours Used in “Normal” mode.
   Lamp Life Reminder: Choose this function to show or to hide 
the warning message when the changing lamp message is 
displayed. The...

44
English
User Settings
 Dust Filter Reminder
 
Use this option to view the filter status and configure the filter 
settings. Press the ► key to enter the sub menu and configure the 
desired settings.
This item is disabled for the projector sold in some regions.
   Filters Remind (Hour): Set the maximum filter time usage.
   Cleaning Up Reminder: Choose this function to show or hide 
the warning message when the changing filter message is 
displayed.
If the reminder function is enabled and the usage...

English
45
English
User Settings
3D
 3D
 
Use this option to enable/disable the 3D function. 
 Off: Choose “Off” to display normal (2D) picture.
 On: Choose “On” to display 3D format.
 3D Sync Invert
  Use this option to enable/disable the 3D sync invert function.
 Off: Choose “Off” for default frame contents.
  On: Choose “On” to invert left and right frame contents. Choose 
“On” if viewing image is not natural or felt 3D incorrect. 
 3D Format
  Use this option to select the appropriate 3D format...

46
English
Troubleshooting
Problem: No image appears on screen
  Ensure all the cables and power connections are correctly and 
securely connected as described in the “Installation” section.
 Ensure the pins of terminals are not crooked or broken.
  Check if the projection lamp has been securely installed. Refer to 
the “Replacing the lamp” section section for more information.
  Make sure you have removed the lens cap and the projector is 
switched on.
  Ensure that the “AV Mute” feature is not...

English
47
English
Troubleshooting
Problem: The screen of the Notebook computer is not 
displaying a presentation
 If you are using a Notebook PC:
   Some Notebook PCs may deactivate their own screens when a 
second display device is in use. Each has a different way to be 
reactivated. Refer to your computer’s documentation for detailed 
information.
Problem: Image is unstable or flickering
  Adjust the “Phase” or “Clock” to correct it. Refer to the  
“H. Position” or “V. Position” section for more...

48
English
Troubleshooting
Problem: Image is reversed
   Select “SCREEN > Projection Mode” from the OSD menu to ad-
just the image.
Problem: Lamp burns out or makes a popping sound
   When the lamp reaches its end of life, it will burn out and may 
make a loud popping sound.  If this happens, the projector will 
not turn on until the lamp module has been replaced. To replace 
the lamp, follow the procedures in the “Replacing the Lamp”.