Ricoh Projector PJ WX2240 User Manual

							Read this manual carefully before you use this machine and keep 
it handy for future reference. For safe and correct use, be sure to 
read the Precautions in this manual before using the machine.
Appendices Replacing the lamp
Troubleshooting
User Settings
Basic Operations
Introduction
Usage Notice
7.
6.
5.
4.
3.
2.
1.
User’s Manual 
						

							English
1
English
Table of Contents
Table of Contents ............................1
Usage Notice ....................................2
Precautions  .........................................2
Safety Labels of This Machine ............8
Regulation & Safety Notices  ...............9
Other Information ..............................15
Introduction ....................................16
Product Features  ..............................16
Package Overview ............................17
Product Overview  .............................18
Connection Ports ..................................19
Control Panel........................................20
Remote Control  ....................................21
Remote Control Battery  ....................23
For the First Time .................................23
Replace the Battery ..............................23
Remote Control Operating Range ........24
Basic Operations  ...........................25
Connecting the Projector  ..................25
Connect to Computer/Notebook ...........25
Connect to Computer/Notebook ...........26
Connect to AV Equipment  ....................27
Connect to AV Equipment ....................28
Powering On/Off the Projector ..........29
Powering On the Projector  ...................29
Powering Off the Projector  ...................30
Warning Indicator  .................................31
Adjusting the Projected Image ..........32
Adjusting the Position of Projector  Image  ...................................................32
Adjusting the Projector Zoom and  Focus....................................................33
Adjusting Projection Image Size...........33
User Settings  .................................35
Using the On Screen Display  (OSD) ................................................35
How to operate  .....................................35
PICTURE..............................................36
SCREEN  ..............................................38
SETTING ..............................................40
VOLUME (PJ X2240 / PJ WX2240)  .....41
OPTIONS  .............................................42
3D .........................................................45
Troubleshooting  ............................46
Replacing the lamp........................51
Appendices ....................................52
List of Compatible Signals  ................52
Configurations of Terminals ..............56
Terminal: Computer In 1/2 (Mini D-sub 15 pin) [Monitor Out]..................................56
Terminal: PC Control (D-sub 9 pin)  ......56
Specifications ....................................57
Cabinet Dimensions ..........................58
Trademarks  .......................................59   
						

							2
English
Usage Notice
Precautions
 
Follow all warnings, precautions and maintenance as 
recommended in this user’s guide to maximize the life of your 
unit.
■ Warning-This apparatus must be earthed.
■ Warning-Do not look into the projector’s lens when the 
lamp is on.  The bright light may hurt your eyes.
■ Warning-To reduce the risk of fire or electric shock, do not 
expose this projector to rain or moisture.
■ Warning-Do not open or disassemble the projector as this 
may cause electric shock.
■ Warning-When replacing the lamp, allow unit to cool 
down at least 60 minutes, and follow all 
replacement instructions.
■ Warning-When the lamp reaches the end of its life, it will 
burn out and may make a loud popping sound. 
If this happens, the projector will not turn back 
on until the lamp module has been replaced. To 
replace the lamp, follow the procedures listed 
under “Replacing the Lamp”.
■ Warning-Do not remove the cabinet cover, or you may be 
exposed to dangerous voltage. Refer servicing to 
qualified service personnel only.
■ Warning-This product should be operated only from the 
type of power source which does not exceed the 
voltage range specified on the rating label and 
the power cord. If you are not sure of the type of 
power supply to your home, consult your sales 
representative or local power company.
■ Warning-Do not use the polarized plug with an extension 
cord , receptacle, or other outlet unless the 
blades can be inserted completely with three 
wire grounding type to prevent blade exposure. 
Failure to follow these instructions may result in 
fire or electric shock.     
						

							English
3
English
Usage Notice
■ Warning-Plastic bags can be dangerous, please do not 
leave near babies and young children. To avoid 
the threat of suffocation, please keep away from 
their nose and mouth.
■ Warning-Installing the Projector on a Wall or Ceiling:
a) Do not attempt to clean or replace parts for a 
machine that is installed in a high location on 
a wall or ceiling. Doing so may cause it to fall 
down, resulting in an injury.
b) Do not open the lamp cover of a machine that 
is installed on a wall or ceiling. Doing so may 
cause the lamp cover to fall down. If the lamp 
is broken, pieces of glass may fall and cause an 
injury.
c) Contact your sales or service representative 
to clean or replace parts for a machine that is 
installed on a wall or ceiling.
d) If a machine is incorrectly installed on a 
wall or ceiling, it may fall down and cause 
an injury. Contact your sales or service 
representative if you want to install a machine 
on a wall or ceiling.
e) Do not obstruct the machine’s vents. Doing 
so risks fire caused by overheated internal 
components.
f) For users, do not install the projector by 
yourself. Contact your sales or service 
representative if you want to install the 
projector on a wall or ceiling.
g) For sales or service representatives:
-  Use brackets that are strong enough to 
support the projector. The projector weighs 
about 2.6 kg (5.75 lb.).
-  The projector must be installed in a location 
that is sturdy enough to support the full 
weight of the projector and brackets.
-  Use only the screws (three M4~16 screws) 
provided with the projector to attach the 
brackets to the projector.
-  Use all three of the projector’s screw holes 
to attach the brackets. The locations of the 
screw holes are shown in the illustration 
below. Make sure that the screws are 
tightened firmly.     
						

							4
English
Usage Notice
■ Caution-Do not use lens cap when projector is powered 
on.
■ Caution-This projector will detect the life of the lamp 
itself. Be sure to change the lamp when it shows 
warning messages.
■ Caution-Never operate this unit on AC power during 
a thunderstorm. If you see lightning or hear 
thunder, never touch the unit, cables and/
or peripherals. An electric surge caused by 
the storm, may result in an electrical shock or 
damage to the unit.
■ Caution-Never push objects of any kind into this product 
through openings as they may touch dangerous 
voltage points or short-out parts that could result 
in a fire or electric shock. Never spill liquid of 
any kind on the product.
■ Caution-Do not place or keep the projector within the 
reach of the children. It may fall or tip over, 
possibly causing serious injury.
■ Caution-Do not stack other equipment on this product 
and do not place this product on other 
equipment. The top and bottom surface of this 
product increase in temperature during normal 
use and may damage the other unit.
■ Caution-Do not use attachments not recommended by 
RICOH. Use of an incompatible attachments 
could cause hazards or damage to the product.
■ Caution-Do not place this product on an unstable cart, 
stand, tripod, bracket, or table. The product may 
fall, causing serious injury to a child or adult, 
and serious damage to the product.     
						

							English
5
English
Usage Notice
■ Caution-Unplug this product from the wall outlet and 
take the product to qualified service personnel if 
you encounter any of the following conditions:
a)  The power supply cord or plug is damaged.
b)   Liquid has been spilled, or objects have fallen 
into the product.
c)  The product has been exposed to rain or 
water.
d)   The product does not operate normally when 
following the operating instructions. Adjust 
only those controls that are covered by the 
operating instructions.
e)  The product has been dropped or damaged in 
any way. (If the cabinet should break, please 
handle with care to avoid injury.)
■ Caution-This product incorporates glass components, 
including a lens and a lamp. If these should 
break, please handle with care to avoid injury 
and contact your sales representative for repair 
service. Avoid any broken pieces of glass since 
they may cause injury. In the unlikely event that 
the lamp ruptures, thoroughly clean the area 
around the projector and discard any edible 
items placed in that area since they may be 
contaminated.
■ Caution-Do not place anything in front of the lens while 
the projector is operating. Things placed in front 
of the lens may overheat and burn or start a fire.
■ Caution-Unauthorized substitutions may result in fire, 
electric shock, or other hazards. (Only the 
replacement of the lamp should be made by 
users.)
■ Caution-Upon completion of any service or repairs to this 
product, ask the service technician to perform 
safety checks to verify that the product is in 
proper operating condition.
■ Caution-Do not leave thermal paper documents or easily 
deformed items on top of the unit or near the air 
exhaust for long periods of time.     
						

							6
English
Usage Notice
■ Caution-The heat from the unit could erase the 
information on the thermal paper, or cause 
deformation or warping.
■ Caution-Do not use the product in a closed installation 
location. Do not place the product in a box or in 
any other closed installation location. Otherwise 
it may overheat, which could result in a risk of 
fire.     
						

							English
7
English
Usage Notice
  Do:
■   After unpacking this product, read the manual carefully, and 
follow all the operating and other instructions.
■   Turn off the product before cleaning.
■   Use a soft cloth moistened with mild detergent to clean the 
display housing.
■   Disconnect the power plug from AC outlet if the product is not 
being used for a long period of time.
  Do not:
■   Block the slots and openings on the unit provided for 
ventilation.
■   Use abrasive cleaners, waxes or solvents to clean the unit.
■   Use under the following conditions:
-   Extremely heat, cold or humidity.
-   In areas susceptible to excessive dust and dirt.
-   Near any appliance generating a strong magnetic field.
-   In direct sunlight. 
Important:Contents of this manual are subject to change without prior notice.  In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handing or operating this product.     
						

							8
English
Usage Notice
Safety Labels of This Machine
1   To replace the lamp, unplug the power cord and then wait for 60 minutes.
2  Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyesight.
3  Do not place anything in front of the lens while the projector is operating. Things placed in front of the lens may overheat and burn or start a fire. If you want to temporarily stop the projected image, use the AV mute on the remote control or the keypad.
4  This product should be operated only from the type of power 
source which does not exceed the voltage range specified on the 
rating label and the power cord. 
1
2
3
4