Ricoh Projector PJ WX2240 User Manual

							English
19
English
Introduction
Connection Ports
1. S-Video In terminal
2. Monitor Out terminal (*)
3.   Computer 1 In terminal
4.   Computer 2 In terminal (*)
5.   AC In socket
6. HDMI Input terminal
7. Service terminal
8. PC Control terminal (*)
9. Audio 1 In terminal (*)
10. Audio Out terminal (*)
11.   Audio 2 In terminal (For Video and S-Video) (*)
12.   Video In terminal
1
5
6
11
15 101
5
6
11
15 10
34
11
12
5
987
	The interface is subject to model’s specifications.
	(*) is only for RICOH PJ X2240 / RICOH PJ WX2240
Note
10
12
6
1
5
6
11
15 10
83121
5
67
RICOH PJ X2240  / RICOH PJ WX2240
RICOH PJ S2240     
						

							20
English
Introduction
Control Panel
7
1Keystone /Use  or  to adjust the image to 
compensate for distortion caused by 
tilting the projector.
2Auto SetAutomatically synchronize the 
projector to the input source.
3AV MuteMomentarily turn off/on the audio 
and video.
4Four  
Directional 
Select Keys
Use  or  or  or  to select items or 
make adjustments to your selection.
5Temp indicatorIndicate the inside of the projector’s 
temperature status.
6Power indicatorIndicate the projector’s power status.
7Lamp indicatorIndicate the projector’s lamp status.
8PowerRefer to the “Power On/Off the 
Projector” section. (See pages 29~30)
9MenuPress “Menu” to launch the on screen 
display (OSD), or go back to the 
previous menu. (See page 35)
10InputSelect the input source.
11EnterSelect or confirm settings.
3
1
2
4
56
8
9
10
11         
						

							English
21
English
Introduction
Remote Control
1TransmitterSend signals to the projector.
2PictureSelect the preset picture mode.
3InputSelect the input source.
4AV MuteMomentarily turn off/on the audio and video.
5Four Directional Select KeysUse  or  or  or  to select items or make adjustments to your selec-tion.
6Auto SetAutomatically adjust the RGB signal from the computer.
7Volume +/-Increase/decrease speaker volume.
8Magnify +/-Enlarge part of the screen image. Reduce the enlarged part of the image. (Digital Zoom)
9EcoShow “Lamp Power Mode” menu.
10FreezePause the screen image. Press again to resume the screen image.
13
3
1
9
2
4
5
6
7
8
10
11
12
14
15
	Volume + / - keys are not available for  RICOH PJ S2240.
Note      
						

							22
English
Introduction
11MenuPress “Menu” to launch the on screen display (OSD), or go back to the previous menu. (See page 35)
12EnterSelect or confirm settings.
13Keystone /Adjust the image to compensate for distortion caused by tilting the projector.
14AspectUse this function to choose your desired aspect ratio for the screen.
15PowerRefer to the “Power On/Off the Projector” section. (See pages 29~30)     
						

							English
23
English
Introduction
Remote Control Battery
Press the battery compartment release button and then slide out the battery tray.
1Slide the battery tray back into the battery compartment until it snaps into place.
3Remove the old battery and put the new battery (CR2025) into the battery tray.
2
To ensure safe operation, please observe the following precautions :
■  Never throw battery into a fire.
■  Do not ingest battery, Chemical Burn Hazard.
■  Keep new and used batteries away from children.
For more detail information, please see page 13.
For the First Time
Before using the remote control 
for the first time, remove the 
transparent insulation sheet.
Replace the Battery
Transparent insulation sheet     
						

							24
English
Introduction
Remote Control Operating Range
Point the remote control toward the projector (Remote 
Receiver) when pressing any button.
19.7 (6m)
±30° (horizontally),
±20° (vertically)
Maximum operating range for the remote control is about 
19.7’ (6m) and ±30° (horizontally), ±20° (vertically) in front of 
the projector.     
						

							English
25
English
Basic Operations
1
5
6
11
15 10
E62405SP
R
Connecting the Projector
	Due to the difference in applications for each 
country, some regions may have different accessories.
Note
		To ensure the projector works well with your computer, 
please make sure the timing of the display mode is 
compatible with your projector. (See pages 52-55)
		Use the cables that come with the projector. (*)
1.........................................................................\
....................Power cord (supplied)2.........................................................................\
........................... HDMI/DVI cable3.........................................................................\
......................RGB cable (supplied)
	Make sure that the power plug is fully inserted into both the projector AC inlet and the wall outlet.
	The AC outlet must be near this equipment and must be easily accessible.
Note
1
3
Connect to Computer/Notebook
2
RICOH PJ S2240
(*)
(*)     
						

							26
English
Basic Operations
1
5
6
11
15 101
5
6
11
15 10
E62405SP
R	Due to the difference in applications for each 
country, some regions may have different accessories.
Note
		To ensure the projector works well with your computer, 
please make sure the timing of the display mode is 
compatible with your projector. (See pages 52-55)
		Use the cables that come with the projector. (*)
1.........................................................................\
....................Power cord (supplied)2.........................................................................\
......................................Audio cable3.........................................................................\
........................... HDMI/DVI cable4.........................................................................\
......................RGB cable (supplied)5.........................................................................\
.........................................RGB cable6.........................................................................\
......................................Audio cable 
	Make sure that the power plug is fully inserted into both the projector AC inlet and the wall outlet.
	The AC outlet must be near this equipment and must be easily accessible.
Note
1
4
Connect to Computer/Notebook
Monitor
3
5
2
Powered Speaker
RICOH PJ X2240 / 
RICOH PJ WX2240
2
6
(*)
	When “Monitor Out (Standby)” is set to “Off”, the monitor out and audio path-through will be deactivated in standby mode.
	When Audio Out is connected, Built-in speaker doesn’t sound.
Note
(*)     
						

							English
27
English
Basic Operations
1
5
6
11
15 10
E62405SP
R
	Due to the difference in applications for each country, some regions may have different accessories.
Note
1.........................................................................\
....................Power cord (supplied)2.........................................................................\
......................................HDMI cable 3.........................................................................\
..................Component-RGB Cable4.........................................................................\
...........................Component Cable5.........................................................................\
.......................................Video cable6.........................................................................\
...................................S-Video cable
S-Video
DVD player, HDTV receiver
	Make sure that the power plug is fully inserted into both the projector AC inlet and the wall outlet.
	The AC outlet must be near this equipment and must be easily accessible.
Note
1
3
5
Connect to AV Equipment
Video
6
4
2
RICOH PJ S2240
		Use the cables that come with the projector. (*)
(*)
Component
HDMI     
						

							28
English
Basic Operations
1
5
6
11
15 101
5
6
11
15 10
E62405SP
R
	Due to the difference in applications for each country, some regions may have different accessories.
Note
1.........................................................................\
....................Power cord (supplied)2.........................................................................\
......................................HDMI cable 3.........................................................................\
..................Component-RGB Cable4.........................................................................\
...........................Component Cable5.........................................................................\
...................................S-Video cable6.........................................................................\
.......................................Video cable7.........................................................................\
......................................Audio cable 8.........................................................................\
......................................Audio cable
S-Video
DVD player, HDTV receiver	Make sure that the power plug is fully inserted into both the projector AC inlet and the wall outlet.
	The AC outlet must be near this equipment and must be easily accessible.
Note
1
3
5
7
6
Connect to AV Equipment
Video
4
2
Powered Speaker
8
RICOH PJ X2240 / RICOH PJ WX2240
7
		Use the cables that come with the projector. (*)
	When HDMI input is selected, only audio signal with HDMI can be output.
	When Audio Out is connected, Built-in speaker doesn’t sound.
Note
(*)
Component
HDMI